DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

w .moxa.com NPort 5600 Series 8 and 16-port RS-232/422/485 rackmount serial device servers Features and Benefits

  • Standard 19-inch rackmount size
  • Easy IP address configuration with LCD panel (excluding wide-temperature models)
  • Configure by Telnet, web browser, or Windows utility
  • Socket modes: TCP server, TCP client, UDP
  • SNMP MIB-II for network management
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC) Certifications Introduction With the NPort® 5600 Rackmount Series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network. Network Readiness for up to 16 Serial Devices Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network. 19-Inch Rackmount Device Server NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for a standard 19-inch rackmount, allowing you to simplify operational, maintenance, and administrative tasks. Real COM/TTY Ports Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals. LED Indicators to Ease Your Maintenance Tasks The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices. Adjustable Termination and Pull High/Low Resistors When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

w .moxa.com Appearance Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 Magnetic Isolation Protection 1.5 kV (built-in) Optical Fiber 100BaseFX Multi-Mode Single-Mode Fiber Cable Type OM1 50/125 µm G.652

800 MHz x km

Typical Distance 4 km 5 km 40 km Wavelength Typical (nm) 1300 1310 TX Range (nm) 1260 to 1360 1280 to 1340 RX Range (nm) 1100 to 1600 1100 to 1600 Optical Power TX Range (dBm) -10 to -20 0 to -5 RX Range (dBm) -3 to -32 -3 to -34 Link Budget (dB) 12 29 Dispersion Penalty (dB) 3 1 Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power. Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB). Ethernet Software Features Configuration Options Telnet Console, Web Console (HTTP/HTTPS), Windows Utility Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP Filter IGMP v1/v2c

w .moxa.com Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5. x, HP-UX 11i, Mac OS X Android API Android 3.1.x and later Time Management SNTP Serial Interface Connector 8-pin RJ45 No. of Ports 8 or 16 ports Serial Standards NPort 5610 Series: RS-232 NPort 5630 Series: RS-422, RS-485 NPort 5650 Series: RS-232, RS-422, RS-485 Operation Modes Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd, Space, Mark Flow Control None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms Terminator for RS-485 120 ohms RS-485 Data Direction Control ADDC® (automatic data direction control) Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND Power Parameters Input Current NPort 5610-8-48V/16-48V: 135 mA @ 48 VDC NPort 5650-8-HV-T/16-HV-T: 152 mA @ 88 VDC NPort 5610-8/16: 141 mA @ 100 VAC NPort 5630-8/16: 152 mA @ 100 VAC NPort 5650-8/8-T/16/16-T: 158 mA @ 100 VAC NPort 5650-8-M-SC/16-M-SC: 174 mA @ 100 VAC NPort 5650-8-S-SC/16-S-SC: 164 mA @ 100 VAC Input Voltage HV Models: 88 to 300 VDC AC Models: 100 to 240 VAC, 47 to 63 Hz DC Models: ±48 VDC, 20 to 72 VDC, -20 to -72 VDC Reliability Automatic Reboot Trigger Built-in WDT

w .moxa.com Physical Characteristics Housing Metal Installation 19-inch rack mounting Dimensions (with ears) 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in) Dimensions (without ears) 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in) Weight NPort 5610-8: 2,290 g (5.05 lb) NPort 5610-8-48V: 3,160 g (6.97 lb) NPort 5610-16: 2,490 g (5.49 lb) NPort 5610-16-48V: 3,260 g (7.19 lb) NPort 5630-8: 2,510 g (5.53 lb) NPort 5630-16: 2,560 g (5.64 lb) NPort 5650-8/5650-8-T: 2,310 g (5.09 lb) NPort 5650-8-M-SC: 2,380 g (5.25 lb) NPort 5650-8-S-SC/5650-16-M-SC: 2,440 g (5.38 lb) NPort 5650-8-HV-T: 3,720 g (8.20 lb) NPort 5650-16/5650-16-T: 2,510 g (5.53 lb) NPort 5650-16-S-SC: 2,500 g (5.51 lb) NPort 5650-16-HV-T: 3,820 g (8.42 lb) Interactive Interface LCD panel display (standard temp. models only) Push buttons for configuration (standard temp. models only) Environmental Limits Operating Temperature Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) Storage Temperature (package included) Standard Models: -20 to 70°C (-4 to 158°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) High-Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications EMI CISPR 32, FCC Part 15B Class A EMC EN 55032/24 EMS NPort 5650-8/16 Series: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 IEC 61000-4-11 DIPs NPort 5650-8/16-HV Series: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 Medical EN 60601-1-2 Class B, EN 55011 Safety UL 60950-1

w .moxa.com MTBF Time NPort 5610-8: 877,888 hrs NPort 5610-8-48V: 870,961 hrs NPort 5610-16: 666,105 hrs NPort 5610-16-48V: 662,111 hrs NPort 5630-8: 765,449 hrs NPort 5630-16: 473,748 hrs NPort 5650-8: 692,010 hrs NPort 5650-8-T: 692,010 hrs NPort 5650-8-HV-T: 627,078 hrs NPort 5650-8-M-SC: 678,053 hrs NPort 5650-8-S-SC: 678,053 hrs NPort 5650-16: 473,748 hrs NPort 5650-16-T: 473,748 hrs NPort 5650-16-HV-T: 442,626 hrs NPort 5650-16-M-SC: 467,180 hrs NPort 5650-16-S-SC: 467,180 hrs Standards AC models: MIL-HDBK-217F HV models: Telcordia (Bellcore) Standard TR/SR Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x NPort 5600 Series device server Installation Kit 1 x rack-mounting kit Cable 1 x power cord, suitable for your region (AC models) Documentation 1 x quick installation guide 1 x warranty card Dimensions

w .moxa.com

Ordering Information

Serial Interface No. of Serial Ports Operating Temp. Input Voltage NPort 5610-8 8-pin RJ45 RS-232 8 0 to 60°C 100-240 VAC NPort 5610-8-48V 8-pin RJ45 RS-232 8 0 to 60°C ±48 VDC NPort 5630-8 8-pin RJ45 RS-422/485 8 0 to 60°C 100-240 VAC NPort 5610-16 8-pin RJ45 RS-232 16 0 to 60°C 100-240 VAC NPort 5610-16-48V 8-pin RJ45 RS-232 16 0 to 60°C ±48 VDC NPort 5630-16 8-pin RJ45 RS-422/485 16 0 to 60°C 100-240 VAC NPort 5650-8 8-pin RJ45 RS-232/422/485 8 0 to 60°C 100-240 VAC NPort 5650-8-M-SC Multi-mode fiber SC RS-232/422/485 8 0 to 60°C 100-240 VAC NPort 5650-8-S-SC Single-mode fiber SC RS-232/422/485 8 0 to 60°C 100-240 VAC NPort 5650-8-T 8-pin RJ45 RS-232/422/485 8 -40 to 75°C 100-240 VAC NPort 5650-8-HV-T 8-pin RJ45 RS-232/422/485 8 -40 to 85°C 88-300 VDC NPort 5650-16 8-pin RJ45 RS-232/422/485 16 0 to 60°C 100-240 VAC NPort 5650-16-M-SC Multi-mode fiber SC RS-232/422/485 16 0 to 60°C 100-240 VAC NPort 5650-16-S-SC Single-mode fiber SC RS-232/422/485 16 0 to 60°C 100-240 VAC NPort 5650-16-T 8-pin RJ45 RS-232/422/485 16 -40 to 75°C 100-240 VAC NPort 5650-16-HV-T 8-pin RJ45 RS-232/422/485 16 -40 to 85°C 88-300 VDC Accessories (sold separately) Cables CBL-RJ458P-100 8-pin RJ45 CAT5 Ethernet cable, 1 m CBL-RJ45F25-150 8-pin RJ45 to DB25 female serial cable, 1.5 m CBL-RJ45F9-150 8-pin RJ45 to DB9 female serial cable, 1.5m CBL-RJ45M9-150 8-pin RJ45 to DB9 male serial cable, 1.5m CBL-RJ45SF9-150 8-pin RJ45 to DB25 male serial cable with shielding, 1.5m CBL-RJ45SF25-150 8-pin RJ45 to DB25 female serial cable with shielding, 1.5m CBL-RJ45SM25-150 8-pin RJ45 to DB9 female serial cable with shielding, 1.5m CBL-RJ45SM9-150 8-pin RJ45 to DB9 male serial cable with shielding, 1.5m Connectors ADP-RJ458P-DB9F DB9 female to RJ45 connector ADP-RJ458P-DB9M RJ45 to DB9 male connector Power Cords PWC-C13AU-3B-183 Power cord with Australian (AU) plug, 1.83 m PWC-C13CN-3B-183 Power cord with three-prong China (CN) plug, 1.83 m PWC-C13EU-3B-183 Power cord with Continental Europe (EU) plug, 1.83 m PWC-C13JP-3B-183 Power cord with Japan (JP) plug, 7A/125V, 1.83 m PWC-C13UK-3B-183 Power cord with United Kingdom (UK) plug, 1.83 m PWC-C13US-3B-183 Power cord with United States (US) plug, 1.83 m

w .moxa.com Rack-Mounting Kits WK-45-01 Rack-mounting kit, 2 L-shaped plates, 8 screws, 45 x 57 x 2.5 mm © Moxa Inc. All rights reserved. Updated Jan 20, 2020. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.