DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

w .moxa.com NPort 5600-DTL Series 8-port RS-232/422/485 serial device servers Features and Benefits

  • 8 serial ports supporting RS-232/422/485
  • Compact desktop design
  • 10/100M auto-sensing Ethernet
  • Configure by Telnet, web browser, or Windows utility
  • Supports Real COM and TCP server, TCP client, UDP socket modes
  • SNMP MIB-II for network management Certifications Introduction NPort® 5600-8-DTL device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with basic configurations. You can both centralize management of your serial devices and distribute management hosts over the network. The NPort® 5600-8-DTL device servers have a smaller form factor than our 19-inch models, making them a great choice for applications that need additional serial ports when mounting rails are not available. Convenient Design for RS-485 Applications The NPort® 5650-8-DTL device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort® 5600-8-DTL device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port. LED Indicators to Ease Your Maintenance Tasks The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort® 5600’s LEDs not only indicate current system and network status, but they also help field engineers monitor the status of attached serial devices. Appearance

w .moxa.com Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 1 Magnetic Isolation Protection 1.5 kV (built-in) Ethernet Software Features Configuration Options Serial Console, Telnet Console, Web Console (HTTP/HTTPS), Windows Utility Management ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, Telnet, TCP/IP, UDP Filter IGMP v1/v2 Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded Fixed TTY Drivers SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X Android API Android 3.1.x and later MIB RFC1213, RFC1317 Time Management SNTP Serial Interface Connector DB9 male No. of Ports 8 Serial Standards NPort 5610-8-DTL Series: RS-232 NPort 5650-8-DTL Series: RS-232, RS-422, RS-485 Baudrate Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd, Space, Mark Flow Control RTS/CTS, DTR/DSR, XON/XOFF Isolation NPort 5650I-8-DTL Series: 2 kV Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms RS-485 Data Direction Control ADDC® (automatic data direction control) Terminator for RS-485 NPort 5650 Series: 120 ohms Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND

w .moxa.com Power Parameters Input Current NPort 5610-8-DTL Series: 340 mA @ 12 VDC NPort 5650-8-DTL Series: 470 mA @ 12 VDC NPort 5650I-8-DTL Series: 740 mA @ 12 VDC No. of Power Inputs 1 Input Voltage 12 to 48 VDC Reverse Polarity Protection Supported Source of Input Power Power input jack Physical Characteristics Housing Metal Dimensions (with ears) 229 x 135.43 x 46 mm (9.02 x 5.33 x 1.81 in) Dimensions (without ears) 197 x 135.43 x 44 mm (7.76 x 5.33 x 1.73 in) Weight NPort 5610-8-DTL Series: 1760 g (3.88 lb) NPort 5650-8-DTL Series: 1770 g (3.90 lb) NPort 5650I-8-DTL Series: 1850 g (4.08 lb) Installation Desktop, DIN-rail mounting (with optional kit), Wall mounting (with optional kit) Environmental Limits Operating Temperature Standard Models: 0 to 60°C (-32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 75°C (-40 to 167°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8 PFMF IEC 61000-4-11 DIPs Safety UL 60950-1 Declaration Green Product RoHS, CRoHS, WEEE MTBF Time NPort 5610-8-DTL Series: 953,388 hrs NPort 5650-8-DTL Series: 740,457 hrs NPort 5650I-8-DTL Series: 258,150 hrs Standards Telcordia (Bellcore) Standard TR/SR Warranty Warranty Period 5 years Details See www.moxa.com/warranty

w .moxa.com Package Contents Device 1 x NPort 5600-DTL Series device server Installation Kit 1 x wall-mounting kit Cable 1 x Ethernet, RJ45 Power Supply 1 x power adapter, suitable for your region (except -T models) Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Serial Interface Serial Interface Connector Serial Interface Isolation Operating Temp. Input Voltage NPort 5610-8-DTL RS-232 DB9 – 0 to 60°C 12-48 VDC NPort 5610-8-DTL-T RS-232 DB9 – -40 to 75°C 12-48 VDC NPort 5650-8-DTL RS-232/422/485 DB9 – 0 to 60°C 12-48 VDC NPort 5650-8-DTL-T RS-232/422/485 DB9 – -40 to 75°C 12-48 VDC NPort 5650I-8-DTL RS-232/422/485 DB9 2 kV 0 to 60°C 12-48 VDC NPort 5650I-8-DTL-T RS-232/422/485 DB9 2 kV -40 to 75°C 12-48 VDC Accessories (sold separately) Connectors ADP-RJ458P-DB9F DB9 female to RJ45 connector Mini DB9F-to-TB DB9 female to terminal block connector DIN-Rail Mounting Kits DK35A DIN-rail mounting kit, 35 mm Power Adapters

w .moxa.com PWR-12200-DT-S1 Desktop power supply (requires power cord), 12 VDC, 2 A, 100-240 VAC, 0 to 40°C operating temperature Power Cords PWC-C13AU-3B-183 Power cord with Australian (AU) plug, 1.83 m PWC-C13CN-3B-183 Power cord with three-prong China (CN) plug, 1.83 m PWC-C13EU-3B-183 Power cord with Continental Europe (EU) plug, 1.83 m PWC-C13JP-3B-183 Power cord with Japan (JP) plug, 7A/125V, 1.83 m PWC-C13UK-3B-183 Power cord with United Kingdom (UK) plug, 1.83 m PWC-C13US-3B-183 Power cord with United States (US) plug, 1.83 m Wall-Mounting Kits WK-35-04 2 plates (35 x 44 x 2.5mm) with 6 screws (FTSx6 M3x4mm) © Moxa Inc. All rights reserved. Updated Nov 08, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.