53209 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 1 of 4 53209

53210 SPDT SOLID-STATE RELAYS

53211 High Power AC/DC Switching

Features:

  • Replacements for M30-1, M30-3, M30-4
  • SPDT, Break-Before-Make
  • Up to 1500 V RMS optical isolation
  • Output voltage up to ±320 VDC (53211)
  • Power FET output low on-state resistance
  • Full military temperature operation: -55ºC to +125ºC
  • Military environmental screening available Applications:
  • High power switching
  • Line drivers
  • Servo control
  • Harsh environment
  • Load control
  • General purpose switching

DESCRIPTION

The 53209, 53210, and 53211 are military SPDT high power, solid-state relays. These light-weight devices are resistant to damage from shock and vibration, and are immune to contac t-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1500 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop for high current capability. The control logic is CMOS compatible, and will accommodate bias supplies ranging between 4 and 16 VDC. A TTL input driver with pull-up resistor may also be used. These solid-state relays are ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are design considerations. Applications include general purpose signal switching and electronic load control. ABSOLUTE MAXIMUM RATINGS Load Current Notes: 1 60 Hz sine wave 2 at 25ºC with 2.0º C/W heat sink max

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 2 of 4 53209, 53210, & 53211 SPDT SOLID-STATE RELAYS

ELECTRICAL CHARACTERISTICS

TA = +25° C PARAMETER CONDITIONS MIN TYP MAX UNITS Isolation Voltage, I/O 60 Hz Sine Wave 1500 VAC RMS Isolation Resistance at 500 V 10 9 Ohms Continuous Operating Output Voltage 53209 53210 53211 160 320 VAC Peak VAC Peak VAC Peak Transient Output Voltage 53209 53210 53211 180 380 VAC Peak VAC Peak VAC Peak Load Current 53209 53210 53211 2.0 ºC/W Heat Sink 4.1 2.6 1.3 Amps RMS On Resistance 53209 53210 53211 T A = 25ºC 0.6 1.5 6.0 Ohms Ohms Ohms Capacitance, I/O 25 V, 1 MHz 5 pF Leakage Current Load Voltage = Maximum 20 µA Bias Supply Voltage, VDD 4 16 VDC Bias Current 13 16 mA Control Logic Voltage 16 VDC Control Logic Current 2 µA Control Logic Level – High 0.75 VDD V DD VDC Control Logic Level – Low 0 0.15 V DD VDC tr (Rise Time) ton (Turn-On-Time) tf (fall Time) toff (Turn-Off Time) td (Dwell Time) Load Voltage = 28 VDC RL = 50Ω 0.5 3.0 4.0 250 1.5 ms ms µs µs ms Thermal Resistance, θJA θJC 4.2 ºC/W ºC/W

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 3 of 4 53209, 53210 and 53211 SPDT SOLID-STATE RELAYS Truth Table INPUT (Pin 1) Pin 12 Pin 16 High Closed Open Low Open Closed COMMON FET OUTPUT VDD CONTROL LOGIC GND INPUT BUFFER

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. MICROCIRCUITS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 8/12/02 Pg. 4 of 4 53209, 53210 and 53211 SPDT SOLID-STATE RELAYS Package Dimensions .735 (.060) (1.390) .240 MAX. 1.000 .600 .800 .200 TOL: ±.010 (BOTTOM VIEW) .200 .400 22 16 1.450 1.750 2.100 .45 MIN. Ø.157

2 PLACES

Ø.040, 6 PLACES .795