531-501-63 MARL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. l Each product will operate over a wide volt age input range l Bright nickel plated brass housing l Full internal potting to resist shock and vibration l Sealed to IP67 l True Bi-polar product for low voltage DC

applications

l Other voltages including DC options available in this range PROFESSIONAL LED INDICATORS Ø12.7mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 065/07 Issue 2 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.

FEATURES

531 SERIES

PACK QUANTITY = 10 PIECES Page 1 of 2 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Refer to p age 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cool white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE AC/DC DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 531-501-63 Red Colour Diffused 12-28 6-16 11000 643 -40 ~ +95^ -40 ~ +100 Yes 531-521-63 Yellow Colour Diffused 12-28 6-16 16000 591 -40 ~ +95^ -40 ~ +100 Yes 531-532-63 Green Colour Diffused 12-28 6-16 23000 527 -40 ~ +95^ -40 ~ +100 Yes 531-930-63 Blue Colour Diffused 12-28 6-16 7000 470 -40 ~ +95^ -40 ~ +100 Yes 531-997-63 Cool White Colour Diffused 12-28 6-16 14000 *see below -40 ~ +95^ -40 ~ +100 Yes 531-501-75 Red Colour Diffused 110Vac 6 11000 643 -40 ~ +95^ -40 ~ +100 Yes 531-521-75 Yellow Colour Diffused 110Vac 6 16000 591 -40 ~ +95^ -40 ~ +100 Yes 531-532-75 Green Colour Diffused 110Vac 6 23000 527 -40 ~ +95^ -40 ~ +100 Yes 531-930-75 Blue Colour Diffused 110Vac 6 7000 470 -40 ~ +95^ -40 ~ +100 Yes 531-997-75 Cool White Colour Diffused 110Vac 6 14000 *see below -40 ~ +95^ -40 ~ +100 Yes UNITS Vac/Vdc mA mcd nm °C °C HIGH INTENSITY

SERIES MAXIMUM PANEL MOUNTING MINIMUM MIN/MAX. POWER CUTOUT TORQUE MOUNTING PANEL DISSIPATION CENTRES THICKNESS mw mm Nm mm mm Mounting hole to be clean and burr free BS EN ISO 9001:2000 Approved Manufacturer How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 065/07 Issue 2 Page 2 of 2 Dimensions in mm (Typical) Not to scale Below 50Vac/dc Above 50Vac/dc MOUNTING HOLE MATERIALS PUSH-ON CONNECTORS Body Nickel plated brass to BS 2874 CZ121 Nut Stainless Steel grade 303 Panel Seal Viton Termination Copper with silver flash finish Lock Washer Zinc plated steel Fresnel lens Polycarbonate Encapsulation PC5430 Header Nylon6 A82 925-000-00 is brass tin plated. For use with 531 series lamps. Dimensions in mm (Typical) Not to scale DERATING INFORMATION 501 & 521 532, 930 & 997