53024 MICROPAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/18/01
53024 SPST SOLID-STATE RELAY Mii
Features:
- Replacement for 690-2
- SPST, Normally Open
- 1000 V RMS Optical Isolation
- CMOS or TTL Compatible Input
- Power FET Output – Low On-state Resistance
- Full Military Temperature Operation: -55ºC to +105ºC
- Military Environmental Screening Available
- Built and Tested to MIL-PRF-28750 utilizing the test methods of MIL-STD-883C
- Qualified to 86001-001 Applications:
- Low level power control
- Current loop switches
- Isolated line driver
- Servo and synchro resolver control
- Military/Space general purpose switching
DESCRIPTION
The 53024 is a military SPST solid-state relay. This small, light-weight device is resistant to damage from shock and vibration, and immune to contact-related problems (contamination, arcing) associated with mechanical equivalents. Optical coupling between the input and output stages provides effective isolation up to 1000 volts AC RMS. Power FET outputs eliminate bipolar offset, and minimize output voltage drop. The control logic is TTL and CMOS compatible, and will accomm odate bias supplies between 3.8 and 32 VDC. A built-in Schmitt trigger increases noise margin when using the device in the CMOS input mode. This solid-state relay is ideal for use in military systems, or wherever high reliability, low power actuation, and light weight are design considerations. Applications include general purpose signal switching and electronic load control. ABSOLUTE MAXIMUM RATINGS
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/18/01 53024 SPST SOLID-STATE RELAY
ELECTRICAL CHARACTERISTICS
TA = +25ºC PARAMETER CONDITIONS MIN TYP MAX UNITS Input (Control) Characteristics TTL Configuration Input Current 13 16 mA Control Voltage Range See Table 1 – Bias Resistance 3.8 32 VDC Turn-Off Voltage Maximum 1.5 VDC Turn-On Voltage Minimum 3.8 VDC Input (Control) Characteristics CMOS Configuration Input Current V C = + 5 VDC 25 250 µA Control Voltage Range 2.5 18 VDC Bias Supply - VC See Table 1 – Bias Resistance 3.8 32 VDC Bias Current 13 16 mA Turn-Off Voltage Minimum 2.5 2.8 VDC Turn-On Voltage Maximum 0.5 VDC Total Schmitt Hysteresis 1.8 VDC TA = +25ºC PARAMETER CONDITIONS 53024 UNITS Maximum Continuous Operating Output Voltage 60 VDC Maximum Load Current 25ºC 1.0 A On Resistance – Maximum 25ºC 0.35 Ohms Typical Thermal Resistance, θJA θJC 120 30 ºC/W Turn-On Time, Maximum 3.0 ms Turn-Off Time, Maximum 3.0 ms Off State Leakage, 80 V 100 µA Dielectric Strength, Minimum I/O, 60 Hz Sine Wave 1000 V RMS Typical Isolation Resistance Input to Case, 500 V 10 9 Ohms
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/18/01 53024 SPST SOLID-STATE RELAY Package Dimensions .335 SQ MAX .100 TYP .370 SQ MAX.200 .700 MIN.275 MAX .100 TYP.085 REF ONLY .017 DIA .047 .032 7 1 5 4 3
Application Information
(NON-INVERTING) CMOS CONFIGURATION (INVERTING) Table 1 Limiting Resistance (RS) Values (With Heat Sink) V(VDC) 3.8-6 6-10 10-14 14-18 18-22 22-26 26-32 R(Ω) 300 620 910 1200 1500 2000 R a t i n g ( W ) ¼¼½½½ 1