5212 CONNOR-WINFIELD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Specifications subject to change without notice. All dimensions in inches. © Copyright 2007 The Connor-Winfield Corporation 2.5V LVCMOS Surface Mount Crystal Clock Oscillator 5212 5222 5232 Series XO The Connor-Winfield models 5212, 5222, and 5232 are 5.0mm x 7.5mm, 2.5V LVCMOS, Surface Mount, Fixed Frequency Crystal Oscillators (XO) designed for use in all applications requiring precision clocks. This oscillator features low stand-by current (10uA) when the output is disabled. The RoHS compliant, surface mount package is designed for high-density mounting and is optimum for mass production. Operating Specifications Parameter Minimum Nominal Maximum Units Notes Frequency Range (Fo) 1.0 - 170 MHz Frequency Tolerance - ppm 1 5212 -25 25 5222 -50 50 5232 -100 100 Operating Temp Range -40 - 85 °C Supply Voltage (Vdd) 2.25 2.50 2.75 Vdc Supply Current (Icc) 1.8 to 31.999 MHz - - 10 32 to 79.999 MHz - - 12 mA 80 to 170 MHz - - 30 Absolute Maximum Ratings Parameter Minimum Nominal Maximum Units Notes Storage Temperature -55 - 125 °C Supply Voltage (Vcc) -0.5 - 7.0 Vdc Features: 1.8 to 170 MHz 2.5V Operation RoHS Compliant Tri-State Enable / Disable Function Overall Frequency Tolerance: 5212 ±25 ppm; 5222 ±50 ppm; 5232 ±100 ppm Temperature Range: -40 to 85°C Power Saving Stand-By Current Ceramic Surface Mount Package Tape and Reel Packaging Input Characteristics Parameter Minimum Nominal Maximum Units Notes Enable Voltage - (Vih) ≥ 70% Vdd - - Vdc 2 Disable Voltage - (Vil) - - ≤ 30% Vdd Vdc Enable Time - - 10 nS Disable Time - - 150 nS Output Disable Current (lcc) - - 10 uA LVCMOS Output Characteristics Parameter Minimum Nominal Maximum Units Notes Load - - 15 pF Voltage High (Voh) 2.14 - - VdcLow (Vol) - - 0.26 Current High (loh) -8 - - mALow (lol) - - 8 Duty Cycle at 50% of Vcc 45 50 55 % Rise / Fall Time 10% to 90% - - 5 nS Start-Up Time - - 10 mS Period Jitter - 1.5 3.0 ps RMS Notes: 1. Inclusive of calibration @ 25°C , frequency vs temperature stability, supply voltage change, load change, shock and vibration, 10 years aging. 2. Oscillator output is enabled with no connection on pin 1. Period Jitter - 15 25 ps Pk - Pk Integrated Phase Jitter (12KHz to 20MHz) - 0.5 1.0 ps RMS

2111 Comprehensive Drive

Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Sm077 Date Bulletin Page Revision 1 of 2

03 Oct 2007

Aurora, Illinois 60505 Phone: 630- 851-4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221

Specifications subject to change without notice. All dimensions in inches. © Copyright 2007 The Connor-Winfield Corporation Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Bulletin Sm077 Page 2 of 2 Revision 06 Date 03 Oct 2007 Pin Connections 1: Enable/Disable 2: Ground 3: Output 4: Vdd OSCILLOSCOPE FREQ COUNTER OSC POWER SUPPLY INPUT FOR E/D PROBE Meets EIA-481A and EIAJ-1009B 2,000 PCS/Reel Bypass capacitor, C-by, should be ceramic capacitor ≥ .01 uf SYMMETRY Soldering General Conditions 260°C max x 10 sec max x 2 times max or 230°C max x 180 sec max x 1 time Typical Operation Data (Vapor phase reflow) 20 to 100 sec up to 215°C, 50 sec at 215°C, then down to room temperature per 1 to 5°C / sec Environmental Characteristics Temperature Cycle The specimen shall meet electrical characteristics after tested 5 cycles of -55°C / 30 minutes and +125°C / 30 minutes Hermetical No bubbles appear in Flourinert (FC-43) at 125°C ±5°C for 5 minutes Solvent Resistance Marking will withstand immersion in Isopropyl Alcohol or Trichloroethylene Suggested Pad Layout

Ordering Information

5212 - 44.736M CLOCK SERIES CENTER FREQUENCY Mechanical Characteristics Free Drop The specimen shall meet electrical characteristics after tested 3 times, Free Drop testing on the hard wooden board from a height of 75 cm. Vibration The specimen shall meet electrical characteristics after tested by the following conditions: 10-55Hz 1.5mm Amplitude, 55-2000 Hz 20 G's, 2 hours for each plane Thermal Shock After applied Thermal Shock of 260°C max x 10 sec max x 2 times, or 230°C max x 180 sec max, the specimen shall meet electrical characteristics Solderability (EIAJ-RCX-0102.101 Condition 1a) 1) Flux: MIL-F-14256 (WW Rosin=25%, Isopropyl Alcohol = 75%) 2) Solder: QQ-S-571 (Sn = 63%, Pb = 37%) 3) Solder bath temperature: 235°C ±5°C 4) Depth of immersion: Up to electrical terminal 5) Immersing time: Within 2 sec ±0.5 sec into solder bath After performing the above procedures, a newly soldered coverage shall be greater than 90%After performing the above procedures, a newly soldered coverage shall be greater than 90%After performing the above procedures, a newly soldered coverage shall be greater than 90%After performing the above procedures, a newly soldered coverage shall be greater than 90%After performing the above procedures, a newly soldered coverage shall be greater than 90% Test Circuit Output Waveform Tape and Reel Dimensions Package Characteristics Package Hermetically sealed ceramic package and metal cover Dimensional Tolerance: ±.02" (.508mm) ±.005"(.127mm) 4.7 M