520-301-21 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 520-301-21 Red Colour Diffused 12 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 520-325-21 Yellow Colour Diffused 12 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 520-324-21 Green Colour Diffused 12 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 520-934-21 Blue Colour Diffused 12 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 520-998-21 Cool White Colour Diffused 12 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes 520-301-23 Red Colour Diffused 24-28 20 900 660 -40 ~ +85^ -40 ~ +85 Yes 520-325-23 Yellow Colour Diffused 24-28 20 4300 590 -30 ~ +85^ -40 ~ +120 Yes 520-324-23 Green Colour Diffused 24-28 20 7800 525 -30 ~ +85^ -40 ~ +100 Yes 520-934-23 Blue Colour Diffused 24-28 20 2300 470 -30 ~ +85^ -40 ~ +100 Yes 520-998-23 Cool White Colour Diffused 24-28 20 4600 *see below -30 ~ +85^ -40 ~ +100 Yes UNITS Vdc mA mcd nm °C °C l Robust stainless steel housing l Counter sunk mounting for flush styling, sunlight readable LEDs l Sealed to IP67 l Vandal Resistant l Internal reverse protection diode fitted as standard in all voltage models. PROFESSIONAL LED INDICATORS Ø6.1mm Mounting SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
520 SERIES
PACK QUANTITY = 10 PIECES Page 1 of 3 Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 998 *Typical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.339 0.318 BS EN ISO 9001:2000 Approved Manufacturer
MATERIALS PUSH-ON CONNECTORS Body Stainless steel grade 303 Nut Stainless steel grade 303 Sealing Ring Stainless steel grade 303 Panel Seal Nitrile Termination Phosphor bronze with tin on nickel finish Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin TECHNICAL CHARACTERISTICS OPTIONAL FLYING LEADS TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION
15 DC Products Red-anode / Black-cathode 150mm
15 AC Products Brown-live / Blue-neutral 150mm Customised
19/0.15mm 1.2mm lengths
19 DC Products Red-anode / Black-cathode 1000mm available
19 AC Products Brown-live / Blue-neutral 1000mm
For use with 520 series lamps Dimensions in mm (Typical) Not to scale Page 2 of 3 * Min/max panel thickness is 3m / 6.5mm Anode termination indicated by long pin Mounting hole to be clean and burr free BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 Dimensions in mm (Typical) Not to scale SERIES MAXIMUM MAXIMUM PANEL NUT MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING MOUNTING PANEL DISSIPATION VOLTAGE TORQUE CENTRES THICKNESS 520 500 1000 6.1 0.65 x,y=15 3.0-6.5 mw Vdc mm Nm mm mm * = current version = voltage version Panel and Mounting Hole Sealing ringPanel seal SAMPLES AVAILABLE
324, 934 & 998 Page 3 of 3 BS EN ISO 9001:2000 Approved Manufacturer Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2008 : DS 033/06 Issue 4 PART NO. COLOUR VOLTAGE DC (Vdc) Vopr 520-301-04 Red 2.0 520-301-04-15 Red 2.0 520-301-20 Red 5/6 520-301-21-15 Red 12 520-301-22 Red 24 520-301-22-15 Red 24 520-314-22-50 Green 24 520-324-04 Green 3.5 520-324-04-15 Green 3.5 520-324-22 Green 24 520-324-22-15 Green 24 520-324-24 Green 48 520-325-04 Yellow 2.1 520-325-04-15 Yellow 2.1 520-325-20 Yellow 5/6 520-325-22 Yellow 24 520-330-04-15 Red/Green 2.0/2.2 UNITS PART NO. COLOUR VOL TAGE DC (Vdc) Vopr 520-330-04-50 Red/Green 2.0/2.2 520-330-21 Red/Green 12 520-330-22 Red/Green 24 520-330-22-15 Red/Green 24 520-934-04 Blue 3.6 520-934-21-15 Blue 12 520-934-22 Blue 24 520-934-22-15 Blue 24 520-934-22-21 Blue 24 520-934-23-15 Blue 24-28 520-934-24 Blue 48 520-998-04 Cold White 3.6 520-998-21-15 Cold White 12 520-998-22 Cold White 24 520-998-22-50 Cold White 24 520-998-23-15 Cold White 24-28 UNITS ALSO AVAILABLE Part numbers also available in the 520 Series: The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information cont ained within this datasheet. Please contact sales for further information. SAMPLES AVAILABLE