DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

w .moxa.com MGate 5118 Series 1-port CAN-J1939 to Modbus/PROFINET/EtherNet/IP gateways Features and Benefits

  • Converts J1939 to Modbus, PROFINET, or EtherNet/IP
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Supports J1939 protocol
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • microSD card for configuration backup/duplication and event logs
  • Status monitoring and fault protection for easy maintenance
  • CAN bus and serial port with 2 kV isolation protection
  • -40 to 75°C wide operating temperature models available
  • Security features based on IEC 62443 Certifications Introduction The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU. The MGate 5118 gateways support the conversion of J1939 data to Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments. Key-in-Free J1939 Command The J1939 protocol is designed to retrieve a wide range of data from CAN-J1939 devices. To eliminate the need to key in all J1939 commands into the gateway by hand, MGate 5118 gateways can auto detect the output commands used by the CAN device. With a single click in the web console, all of the output commands from your CAN device will be detected by the gateway automatically. The commands will be displayed in the web console’s command list, and then can be further modified by the user if needed. The MGate 5118 gateways make it much easier for users to connect PLCs with CAN devices. A Variety of Maintenance Functions The MGate 5118 gateways support a web console for easy configuration and maintenance, and the built-in traffic monitor function monitors J1939 protocol traffic, allowing users to monitor the status of connected CAN devices, including error count, packet count, and bus-offline. The traffic monitor function can also be used to troubleshoot CAN devices. The diagnostics tool helps users to check CAN device settings and indicates CAN device availability by reading the J1939 network address. In addition, the MGate 5118 gateways have a built-in Live List function for when two or more J1939 devices are connected to the same CAN bus. This function shows the PGN and address of packets transmitted from each device, giving users the ability to gage the loading of the CAN bus. To detect loose cables, the MGate 5118 gateways support status monitoring and fault protection functions. The status monitoring function notifies a PLC when the cable between the gateway and CAN device is loose. In addition, the fault protection function executes actions predefined by the user when the cable between the gateway and PLC is loose.

w .moxa.com Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 2 Auto MDI/MDI-X connection Magnetic Isolation Protection 1.5 kV (built-in) Ethernet Software Features Industrial Protocols Modbus TCP Client (Master), Modbus TCP Server (Slave), PROFINET IO Device, EtherNet/IP Scanner, EtherNet/IP Adapter Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client MIB RFC1213, RFC1317 Time Management NTP Client Serial Interface Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) No. of Ports 1 Connector DB9 male Serial Standards RS-232/422/485 Baudrate 50 bps to 921.6 kbps Data Bits 7, 8 Parity None, Even, Odd, Space, Mark Stop Bits 1, 2 Flow Control RTS Toggle (RS-232 only), RTS/CTS Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms Terminator for RS-485 120 ohms Isolation 2 kV Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND Serial Software Features Configuration Options Serial Console Industrial Protocols J1939, Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

w .moxa.com Modbus RTU/ASCII Mode Master, Slave Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Commands 128 Modbus TCP Mode Client (Master), Server (Slave) Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Client Connections 16 Max. No. of Server Connections 32 Max. No. of Commands 128 PROFINET Mode IO Device Max. No. of IO Controller Connections 1 (for read/write) Input Data Size 512 bytes Output Data Size 512 bytes EtherNet/IP Mode Scanner, Adapter CIP Objects Supported Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port Max. No. of Scanner Connections 1 (for read-only), 1 (for read/write) Max. No. of Adapter Connections 4 Input Data Size 496 bytes Output Data Size 496 bytes CAN Interface Industrial Protocols J1939 No. of Ports 1 Connector Spring-type Euroblock terminal Baudrate 250 kbps, 500 kbps Terminator 120 ohms Isolation 2 kV (built-in) J1939 Max. No. of Commands 256 Input Data Size 2048 bytes Output Data Size 2048 bytes Memory microSD Slot Up to 32 GB (SD 2.0 compatible)

w .moxa.com Power Parameters Input Voltage 12 to 48 VDC Input Current 416 mA @ 12 VDC Power Connector Spring-type Euroblock terminal Relays Contact Current Rating Resistive load: 2 A @ 30 VDC Physical Characteristics Housing Metal IP Rating IP30 Dimensions 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in) Weight 589 g (1.30 lb) Environmental Limits Operating Temperature MGate 5118: 0 to 60°C (32 to 140°F) MGate 5118-T: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications Safety EN 60950-1, UL 61010-2-201 EMC EN 61000-6-2/-6-4 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF Hazardous Locations ATEX, Class I Division 2, IECEx Freefall IEC 60068-2-32 Shock IEC 60068-2-27 Vibration IEC 60068-2-6, IEC 60068-2-64 MTBF Time 727,873 hrs Standards Telcordia SR332 Warranty Warranty Period 5 years Details See www.moxa.com/warranty

w .moxa.com Package Contents Device 1 x MGate 5118 Series gateway Installation Kit 1 x DIN-rail kit Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Operating Temp. MGate 5118 0 to 60°C MGate 5118-T -40 to 75°C Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ45F9-150 RJ45 to DB9 female serial cable, 1.5 m CBL-RJ45SF9-150 RJ45 to DB9 female serial shielded cable, 1.5 m Connectors Mini DB9F-to-TB DB9 female to terminal block connector Wall-Mounting Kits

w .moxa.com WK-51-01 Wall-mounting kit, 2 plates, 6 screws, 51.6 x 67 x 2 mm Power Cords CBL-PJTB-10 Non-locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Nov 11, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.