5116 VECTRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
5116 Hi-Rel
100 Watts Street
Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com 9/5/06 SEM Nominal Frequency Range: 1 to 85 MHz Operating Temperature Range Parameter Min Typ Max. Units Condition Ordering Code Operating Temperature Range -0 +70 °C C -20 +70 °C D -40 +85 °C F Supply voltage (Vs) Parameter Min Typ Max. Units Condition Ordering Code Supply voltage 4.75 5 5.25 VDC SV050 Current consumption (no load) 15 mA 1.0 to 23.9 MHZ 20 mA 24 to 49.9 MHz 40 mA 50 to 85.0 MHz Supply voltage 3.135 3.3 3.465 VDC SV033 Current consumption (no load) 6 mA 1.0 to 14.9 M HZ 8 mA 15.0 TO 39.9 MHz 12 mA 40.0 TO 59.9 MHz 16 mA 60.0 TO 85.0 MHz RF output Parameter Min Typ Max. Units Condition Ordering Code Signal ACMOS RFA Load 15 50 pF Signal Level (Vol) 0.5 VDC Vs= 5.0V and 15pF loa d 0.3 VDC Vs=3.3V and 15pF load Signal Level (Voh) 4.5 VDC Vs= 5.0V and 15pF loa d 3.0 VDC Vs=3.3V and 15pF load Rise and fall times for ACMOS (measured 10% to 90%) ns ns 1.0 to 23.9 MHz 24.0 to 85.0 MHz Duty cycle 45 @ 50% Vs < 15 MHz @ 50% Vs >
15 MHz
Frequency Tuning (EFC) 1 Parameter Min Typ Max. Units Condition Ordering Code ±50 ppm AP050 Linearity 10 15 % Tuning Slope Positive Control Voltage Range 0.5 2.5 4.5 VDC with Vs=5.0VD C 0.3 1.65 3.0 VDC with Vs=3.3VDC Typical Applications Features Mil/Space Applications 9x14 J Leaded Surface Mount Package Satellite Applications 4 Point Crystal Mount / Swept Quartz 3 Rad Hard Environments Class S Screening IAW MIL-PRF-55310 100 krad Total Dose Radiation Tolerance 3
Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com 9/5/06 SEM Screening level Parameter Condition Ordering Code Class S Screening IAW MIL-PRF-55310 S Class B Screening IAW MIL-PRF-55310 B Engineering Model No Screening X Additional parameters Parameter Min Typ Max. Units Condition Phase Noise 2 -60 dBc/Hz 10 Hz (measured at 52 MHz) -90 dBc/Hz 100 Hz -120 dBc/Hz 1 kHz -140 dBc/Hz 10 kHz -145 dBc/Hz 100 kHz Weight <2 g Absolute Maximum Ratings Parameter Min Typ Max. Units Condition Supply voltage (Vs) 7.0 V Operable temperature range -55 +85 °C Storage temperature range -55 +125 °C Enclosure Type A - ACMOS Ordering Codes Maximum Maximum A1 = 4 leads 5 Height Stand-off T= Tinned J leads 4 0.188 max 0.043 max X = No Tinning (4.77) (1.09) Pin Connections
1 Control Voltage
2 Case Ground
3 RF Output
4 Supply Voltage
Mount Holly Springs PA 17065 t 717 486 3411 f 717 486 5920 www.vectron.com 9/5/06 SEM How to Order this Product: 6 Step 1 Use this worksheet to forward the following information to your factory representative (example follows): Model Operating Temperature Code Supply Voltage Code RF Output Code Frequency Tuning Code Screening Code Package Code Tinning Code C5116 F SV033 RFA AP030 S A1 T Step 2 The factory representative will then respond with a Vectron Part Number in the following configuration: Model Package Code Dash Dash Number C5116 [Customer Specified Package Code] - [Factory Generated 4 digit number] Typical P/N: C5116A1-0001 Notes: 1 Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25°C) 2 Phase noise degrades with increasing output frequency. 3 Flight models will be manufactured with swept quartz and Class S die; engineering models will be manufactured with cultured quartz and commercial grade components.
4 When requested, leads tinned per Vectron International standard procedure (GR-37409)
5 Contact factory for other options. 6 Please be sure to specify nominal frequency.