DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

w .moxa.com MGate 5111 Series 1-port Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateways Features and Benefits

  • Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • Status monitoring and fault protection for easy maintenance
  • microSD card for configuration backup/duplication and event logs
  • Supports redundant dual DC power inputs and 1 relay output
  • Serial port with 2 kV isolation protection
  • -40 to 75°C wide operating temperature models available
  • Security features based on IEC 62443 Certifications Introduction MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation. Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in factory automation and process automation. The MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs. For system integration, the MGate 5111 can connect to EtherNet/IP PLC/SCADA systems, such as Rockwell Automation PLCs, to PROFIBUS PLC/ DCS systems, or between a new Siemens PLC system that supports PROFINET to an existing PROFIBUS system. The MGate 5111 gateways are designed for easy configuration and quick maintenance. A handy web console can be used to implement remote maintenance tasks, and the configuration wizard UI lets you quickly set up your gateway. A comprehensive collection of troubleshooting tools reduce configuration time and system downtime. The rugged design is suitable for industrial applications, such as factory automation, power, oil and gas, water and wastewater, and other process automation industries. Easy Configuration The MGate 5111 Series has a user-friendly interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, system monitoring functions are provided to record network connections and system log events. A Variety of Maintenance Functions The MGate 5111 supports Protocol Diagnose and Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues caused by incorrect software parameters, such as slave IDs and register addresses, or incorrect command configurations, can be fished out with Protocol Diagnose and Traffic Monitoring, which let you capture and check data to easily identify root causes. MGate 5111 gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. When a PROFIBUS cable gets disconnected, the fault protection function executes actions on end devices identified by a predefined value set by the user.

w .moxa.com Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 2 Auto MDI/MDI-X connection Magnetic Isolation Protection 1.5 kV (built-in) Ethernet Software Features Industrial Protocols Modbus TCP Client (Master), Modbus TCP Server (Slave), PROFINET IO Device, EtherNet/IP Adapter Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client MIB RFC1213, RFC1317 Time Management NTP Client Serial Interface Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) No. of Ports 1 Connector DB9 male Serial Standards RS-232/422/485 Baudrate 50 bps to 921.6 kbps Data Bits 7, 8 Parity None, Even, Odd, Space, Mark Stop Bits 1, 2 Flow Control RTS Toggle (RS-232 only), RTS/CTS RS-485 Data Direction Control ADDC® (automatic data direction control) Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms Terminator for RS-485 120 ohms Isolation 2 kV (built-in) Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND Serial Software Features Configuration Options Serial Console Industrial Protocols PROFIBUS DP-V0 Slave, Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave

w .moxa.com Modbus RTU/ASCII Mode Master, Slave Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Commands 128 Input Data Size 2048 bytes Output Data Size 2048 bytes Modbus TCP Mode Client (Master), Server (Slave) Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Client Connections 16 Max. No. of Server Connections 32 Max. No. of Commands 128 Input Data Size 2048 bytes Output Data Size 2048 bytes PROFIBUS Interface Industrial Protocols PROFIBUS DP No. of Ports 1 Connector DB9 female Baudrate 9600 bps to 12 Mbps Isolation 2 kV (built-in) Signals PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V PROFIBUS Rotary Switch PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration) Mode DP-V0 Slave Max. No. of Master Connections 1 Max. No. of PROFIBUS I/O Modules 24 Input Data Size 244 bytes Output Data Size 244 bytes PROFINET Mode IO Device Max. No. of IO Controller Connections 1 (for read/write) Input Data Size 512 bytes Output Data Size 512 bytes

w .moxa.com EtherNet/IP Mode Adapter CIP Objects Supported Identity, Message Router, Assembly, Connection Manager, TCP/IP interface, Ethernet link, Port Max. No. of Scanner Connections 1 (for read-only), 1 (for read/write) Input Data Size 496 bytes Output Data Size 496 bytes Memory microSD Slot Up to 32 GB (SD 2.0 compatible) Power Parameters Input Voltage 12 to 48 VDC Input Current 416 mA @ 12 VDC Power Connector Spring-type Euroblock terminal Relays Contact Current Rating Resistive load: 2 A @ 30 VDC Physical Characteristics Housing Metal IP Rating IP30 Dimensions 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in) Weight 589 g (1.30 lb) Environmental Limits Operating Temperature MGate 5111: 0 to 60°C (32 to 140°F) MGate 5111-T: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications Safety EN 60950-1, UL 61010-2-201 EMC EN 61000-6-2/-6-4 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF Hazardous Locations ATEX, Class I Division 2, IECEx Freefall IEC 60068-2-32 Shock IEC 60068-2-27 Vibration IEC 60068-2-6, IEC 60068-2-64

w .moxa.com MTBF Time 718,131 hrs Standards Telcordia SR332 Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x MGate 5111 Series gateway Installation Kit 1 x DIN-rail kit Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Operating Temp. MGate 5111 0 to 60°C MGate 5111-T -40 to 75°C Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ45F9-150 RJ45 to DB9 female serial cable, 1.5 m CBL-RJ45SF9-150 RJ45 to DB9 female serial shielded cable, 1.5 m Connectors

w .moxa.com Mini DB9F-to-TB DB9 female to terminal block connector Wall-Mounting Kits WK-51-01 Wall-mounting kit, 2 plates, 6 screws, 51.6 x 67 x 2 mm Power Cords CBL-PJTB-10 Non-locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Nov 07, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.