DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

w .moxa.com MGate 5109 Series 1-port Modbus RTU/ASCII/TCP-to-DNP3 serial/TCP/UDP gateways Features and Benefits

  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports DNP3 serial/TCP/UDP master and outstation (Level 2)
  • DNP3 master mode supports up to 26600 points
  • Supports time-synchronization through DNP3
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • microSD card for configuration backup/duplication and event logs
  • Status monitoring and fault protection for easy maintenance
  • Redundant dual DC power inputs and relay output
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection
  • Security features based on IEC 62443 Certifications Introduction The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5109 supports transparent mode to easily integrate Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks. The MGate 5109 also supports agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitable for industrial applications such as power, oil and gas, and water and wastewater. Easy Configuration via Web Console The MGate 5109 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5109 Series also supports Auto Detection for DNP3 serial outstations, allowing the MGate 5109 to automatically acquire all outstation objects when configured as a DNP3 master. Modbus and DNP3 Protocol Traffic Monitor The MGate 5109 gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, or incorrect command configuration. With Modbus/DNP3 Protocol Traffic Monitor, you can check the captured data and easily identify the root cause. A Variety of Maintenance Functions The MGate 5109 gateways provide a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection events and Modbus maintenance events. Users can review log data remotely through the web console. Specifications Ethernet Interface 10/100BaseT(X) Ports (RJ45 connector) 2 Auto MDI/MDI-X connection Magnetic Isolation Protection 1.5 kV (built-in)

w .moxa.com Ethernet Software Features Industrial Protocols Modbus TCP Client (Master), Modbus TCP Server (Slave), DNP3 TCP Master, DNP3 TCP Outstation Configuration Options Web Console (HTTP/HTTPS), Device Search Utility (DSU), Telnet Console Management ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP, Telnet, SSH, UDP, NTP Client MIB RFC1213, RFC1317 Time Management NTP Client Serial Interface Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) No. of Ports 1 Connector DB9 male Serial Standards RS-232/422/485 Baudrate 50 bps to 921.6 kbps Data Bits 7, 8 Parity None, Even, Odd, Space, Mark Stop Bits 1, 2 Flow Control RTS Toggle (RS-232 only), RTS/CTS RS-485 Data Direction Control ADDC® (automatic data direction control) Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms Terminator for RS-485 120 ohms Isolation 2 kV (built-in) Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND Serial Software Features Configuration Options Serial Console Industrial Protocols Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, DNP3 Serial Master, DNP3 Serial Outstation Modbus RTU/ASCII Mode Master, Slave Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Commands 100

w .moxa.com Modbus TCP Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Mode Client (Master), Server (Slave) Max. No. of Client Connections 16 Max. No. of Server Connections 32 Max. No. of Commands 100 DNP3 (Transparent) Max. No. of Master Connections 16 Max. No. of Outstation Connections 32 DNP3 Serial Mode Master, Outstation Max. No. of Master Connections 1 Max. No. of Outstation Connections 31 Internal Master Database (each Master) Binary Inputs: 8192 points Analog Inputs: 2048 points Counters: 2048 points Binary Outputs: 8192 points Analog Outputs: 2048 points Internal Outstation Database Binary Inputs: 8192 points Analog Inputs: 2048 points Counters: 2048 points Binary Outputs: 8192 points Analog Outputs: 2048 points Binary Input Events: 1024 Analog Input Events: 1024 Counter Events: 1024 DNP3 TCP/UDP Mode Master, Outstation Max. No. of Master Connections 1 Max. No. of Outstation Connections 32 Internal Master Database (each Master) Binary Inputs: 8192 points Analog Inputs: 2048 points Counters: 2048 points Binary Outputs: 8192 points Analog Outputs: 2048 points Internal Outstation Database Binary Inputs: 8192 points Analog Inputs: 2048 points Counters: 2048 points Binary Outputs: 8192 points Analog Outputs: 2048 points Binary Input Events: 1024 Analog Input Events: 1024 Counter Events: 1024 Memory microSD Slot Up to 32 GB (SD 2.0 compatible)

w .moxa.com Power Parameters Input Voltage 12 to 48 VDC Input Current 455 mA @ 12 VDC Power Connector Screw-fastened Euroblock terminal Relays Contact Current Rating Resistive load: 2 A @ 30 VDC Physical Characteristics Housing Metal IP Rating IP30 Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in) Weight 507 g (1.12 lb) Environmental Limits Operating Temperature MGate 5109: 0 to 60°C (32 to 140°F) MGate 5109-T: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications Safety EN 60950-1, UL 508 EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class B EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF Hazardous Locations ATEX, Class I Division 2, IECEx Freefall IEC 60068-2-32 Shock IEC 60068-2-27 Vibration IEC 60068-2-6, IEC 60068-2-64 MTBF Time 888,926 hrs Standards Telcordia SR332 Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x MGate 5109 Series gateway Cable 1 x RJ45-to-DB9 console cable

w .moxa.com Installation Kit 1 x DIN-rail kit Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Operating Temp. MGate 5109 0 to 60°C MGate 5109-T -40 to 75°C Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ45F9-150 RJ45 to DB9 female serial cable, 1.5 m CBL-RJ45SF9-150 RJ45 to DB9 female serial shielded cable, 1.5 m Connectors Mini DB9F-to-TB DB9 female to terminal block connector DIN-Rail Mounting Kits DK-25-01 DIN-rail mounting kit, 2 screws Wall-Mounting Kits WK-36-02 Wall-mounting kit, 2 plates, 6 screws, 36 x 67 x 2 mm Power Cords CBL-PJTB-10 Non-locking barrel plug to bare-wire cable

w .moxa.com © Moxa Inc. All rights reserved. Updated Nov 07, 2019. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.