50ACP GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 50ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 50ACP_S Series 50W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 88.5% Universal AC input range (90~264VAC) Withstand 300VA surge input for 5 sec. Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-25°C~70°C) Operating altitude up to 5000M 100% full load burn-in test Easy assembling from top side PCB soldering side with conformal coating AC-DC Converter 50 Watt The 50ACP_S series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This converter offers a compact and light weight design with and standard rail installa- tion (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 50ACP_24S 50 = 50Watt AC = AC-DC P = series 24 = 24 Vout S = single output Input specifications Input voltage range 88~264VAC, 127~370VDC Input frequency 47~63Hz AC current 1.3A (max) Inrush current Cold start, 230VAC 45A (max) Leakage current (input 264Vac, 63Hz) Input—output: <0.25mA Input—PG: <3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±3 % Voltage adjustment range

  • 5V: 4.75~5.5V
  • 12V: 11.4~13.2V
  • 15V: 14.25~15V
  • 24V: 22.8~26.4V
  • 48V: 45.6~52.8V Line regulation Vin= min. to max. at full load ±0.5 % Load regulation 0% to 100% load ±1 % Set-up time @230VAC input, full load 1.5 s Hold-up time (full load) @230VAC input 50 ms Overshoot and undershoot 5 % Switching fre- quency

100 KHz

  • Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Protection specifications Over-load protection
  • 5V: 8.4~12A
  • 12V: 4.41~6.3A
  • 15V: 3.57~5.1A
  • 24V: 2.31~3.3A
  • 48V: 1.155~1.65A Protection type: 5V is hiccup mode, rest are constant power, auto recovery Over-voltage protection
  • 5V: 5.75~7.5V
  • 12V: 13.8~18V
  • 15V: 17.25~22.5V
  • 24V: 27.6~36V
  • 48V: 55.2~72V Protection type: constant voltage, auto recovery Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -25°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Safety standards: UL60950-1 2nd Ed; IEC 60950-1:2005 (2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions (L*W*H): 99×82×35mm Weight: 320g Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG: 10mA 3000 1500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 50ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 50W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 50ACP_S Series Mechanical dimensions EMC specifications EMC / Emission Compliance to EN55022 Class B / FCC Part15 Class B EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; heavy industry level The power supply is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, typ] 0~70°C -25~0°C Efficiency [%, typ] 230VAC 115VAC UL 50ACP_05S 50 5 8 0~8 80 80 79 80 UL 50ACP_12S 50 12 4.2 0~4.2 120 200 82.5 84.5 UL 50ACP_15S 50 15 3.4 0~3.4 120 200 83.5 85.5 UL 50ACP_24S 50 24 2.2 0~2.2 200 300 85 87 UL 50ACP_48S 50 48 1.12 0~1.12 200 500 86.5 88.5 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 50ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 50W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 50ACP_S Series Typical characteristics Functional block diagram Derating Curves AMBIENT TEMPERATURE (°C) INPUT (VAC) LOAD (%) LOAD (%) Functional diagram