5002 AEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Tilt switches “make” when the electrode is tilted below horizontal and “break” when tilted above the horizontal. Total travel from “make” to “break” is the “Maximum included angle” shown below. The component to which the switch is attached must have a total tilt angle greater than the “Maximum included angle” for proper operation. Part No: 5002 - A1/2 Series Tilt Switch - Mercury 5002 090606 Specifications are subject to change without notice. E&OE. © American Electronic Components Inc 2006 American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: sales@aecsensors.com http://www.aecsensors.com Features: * Un-Insulated * Form: NO/NC/SPST/Mount dependent * Angles Referenced from Horizontal * Single Electrode * Hermetically Sealed * Small Package Size * Narrow Included Angle * High Current Capability * Low Contact Resistance * Long Life Must Make / Break Angle * : - Maximum included Angle: 15º * Make/break angles are electrode + (above) / - (below) 0° horizontal reference Switch Ratings: Max Switching Voltage 240V Max Switching Current 120VAC / 1A: 240VAC / 0.4A: 120VDC / 0.5A: 240VDC / 0.4A (Tungsten Lamp 120V 60Hz / 60W) Initial Contact Resistance (Max). 80 milli Ohms Stand Off Voltage (contact to contact) 1250 V Operating Temperature -38º to 220ºF / -38º to 105ºC Storage Temperature -40º to 356ºF / -40º to 180º C Typical number of operations at specified load 10,000,000 G-Force Activation G-Level/Range N/A Dimensions: Weight per 100pcs. Lbs / Kgs: 0.33 / 0.15 Body Length (less leads). Inches / Millimeters: 0.36 / 9.14 Maximum Diameter. Inches / Millimeters: 0.27 / 6.87 Materials: Lead Wire Type N/A Lead wire length/skive/termination N/A Finish: Tin