440P-CSLM12R6

440P-CRPS11E ALLEN-BRADLEY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

Features

• Large selection of actuator heads
• Positive operation, forced disconnection of contacts
• Snap-acting, slow make before break or slow break before make contact blocks 2 N.C. + 1 N.O.
• Conforms to EN 50047, EN 1088, EN 60947-5-1, EN 292 and EN 60204-1 Applications Types Specifications ➊ Conductive pollution occurs, or dry, non conductive pollution occurs which becomes conductive due to condensation. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals cULus, TUV and CE marked for all applicable directives N.C. slow acting Auxiliary Contacts 1 N.O. (with 2 N.C.) Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A Min Current 5V , 5mA, DC Thermal Current (lth) 10A Rated Insulation Voltage 600V AC Rated Impulse withstand Volt 2500V Travel for Positive Opening Various (see Product Selection table) Max Switching Speed 250mm/s Min Switching Speed 100mm/min Max Switching Frequency 6000 operation per hour Case Material UL approved glass-filled polybutylene terephthalate Roller Material Various polymers Enclosure Protection IP 66 Operating T emperature Min -25°C (-18°F) Max 80°C (+176°F) Pollution Degree ➊ 3 Mech. Life Expectancy 1 x 10 Conduit Entry M20 or 1/2in NPT Fixing 2 x M4 Mounting Any position Colour Red Operating Examples Cam Displacement The actuating cam should be profiled at 30° for optimum operation. (Note: Plunger-type switches operate from a flat profile. Adjustable Lever Arms (A) 30° 30° 30° 60° 60° 30° 30° 60° 60°

Position Interlock Switches 7-3 Safety Limit Switches Small Plastic Senator Product Selection ➊ D4 suffix uses a 4-pin DC Micro (M12) connector. R6 suffix uses a 6-pin AC Micro (dual keyway) connector. Operator Ty p e Contact Contact Ty p e Ty p i c a l Force/ To r q u e t o Operate Contact Opening Characteristics Catalogue Number Safety Aux. 1/2in NPT Conduit M20 Conduit Quick Disconnect ➊ Roller Plunger 1 N.C 1 N.O Snap Acting 5N 440P-CRPS11E 440P-CRPS11B 440P-CRPS11D4 2 N.C 1 N.O BBM 6N 440P-CRPB12E 440P-CRPB12B 440P-CRPB12R6 3 N.C. — — 5N 440P-CRPB03E 440P-CRPB03B 440P-CRPB03R6 2 N.C 1 N.O MBB 6N 440P-CRPM12E 440P-CRPM12B 440P-CRPM12R6 Dome Plunger. 1 N.C 1 N.O Snap Acting 5N 440P-CDPS11E 440P-CDPS11B 440P-CDPS11D4 2 N.C 1 N.O BBM 6N 440P-CDPB12E 440P-CDPB12B 440P-CDPB12R6 3 N.C. — — 5N 440P-CDPB03E 440P-CDPB03B 440P-CDPB03R6 2 N.C 1 N.O MBB 6N 440P-CDPM12E 440P-CDPM12B 440P-CDPM12R6 Hinge Lever 1 N.C 1 N.O Snap Acting 5N 440P-CHLS11E 440P-CHLS11B 440P-CHLS11D4 2 N.C 1 N.O BBM 6N 440P-CHLB12E 440P-CHLB12B 440P-CHLB12R6 3 N.C. — — 5N 440P-CHLB03E 440P-CHLB03B 440P-CHLB03R6 2 N.C 1 N.O MBB 6N 440P-CHLM12E 440P-CHLM12B 440P-CHLM12R6 Recommended standard cordset, 2m, 4-pin, DC Micro (M12) connector. See page 15-10 for additional lengths. 889D-F4AC-2 Recommended standard cordset, 2m, 6-pin AC Micro connector. See page 15-10 for additional lengths. 889R-F6ACA-2 Open Closed Positive Opening Point 2.7 8N0mm 23-24 11-12 2.4 11-12 23-24 6.24.0 2.1 5N 6.20mm 11-12 33-34 21-22 3.0 3.3 0mm 11-12 21-22 31-32 1.9 5N 6.23.3 2.1 5N 6.20mm 11-12 33-34 21-22 1.3 3.3 2.7 7N0mm 23-24 11-12 2.1 11-12 23-24 6.44.0 2.0 5N 6.40mm 11-12 33-34 21-22 3.0 3.3 0mm 11-12 21-22 31-32 2.1 5N 6.43.3 1.9 6.40mm 11-12 33-34 21-22 1.3 3.3 3.5 6N0mm 23-24 11-12 2.6 11-12 23-24 10.06.5 3.1 2N 10.00mm 11-12 33-34 21-22 4.6 5.3 0mm 11-12 21-22 31-32 2.9 2N 10.05.3 3.0 10.00mm 11-12 33-34 21-22 2.5 5.3

Position Interlock Switches Safety Limit Switches Small Plastic Senator Product Selection (continued) ➊ D4 suffix uses a 4-pin DC Micro (M12) connector. R6 suffix uses a 6-pin AC Micro (dual keyway) connector. ➋ Not positive opening Operator Ty p e Contact Contact Ty p e Ty p i c a l Force/ To r q u e t o Operate Contact Opening Characteristics Catalogue Number Safety Aux. 1/2in NPT Conduit M20 Conduit Quick Disconnect ➊ Short Lever 1 N.C 1 N.O Snap Acting 0.15Nm 440P-CSLS11E 440P-CSLS11B 440P-CSLS11D4 2 N.C 1 N.O BBM 0.14Nm 440P-CSLB12E 440P-CSLB12B 440P-CSLB12R6 3 N.C. — — 0.14Nm 440P-CSLB03E 440P-CSLB03B 440P-CSLB03R6 2 N.C 1 N.O MBB 0.14Nm 440P-CSLM12E 440P-CSLM12B 440P-CSLM12R6 Offset Hinge 1 N.C 1 N.O Snap Acting 5N 440P-COHS11E 440P-COHS11B 440P-COHS11D4 2 N.C 1 N.O BBM 6N 440P-COHB12E 440P-COHB12B 440P-COHB12R6 3 N.C. — — 5N 440P-COHB03E 440P-COHB03B 440P-COHB03R6 2 N.C 1 N.O MBB 6N 440P-COHM12E 440P-COHM12B 440P-COHM12R6 Adjustable Lever ➋ 1 N.C 1 N.O Snap Acting 0.15Nm 440P-CALS11E 440P-CALS11B 440P-CALS11D4 2 N.C 1 N.O BBM 0.14Nm 440P-CALB12E 440P-CALB12B 440P-CALB12R6 3 N.C. — — 0.14Nm 440P-CALB03E 440P-CALB03B 440P-CALB03R6 2 N.C 1 N.O MBB 0.14Nm 440P-CALM12E 440P-CALM12B 440P-CALM12R6 Recommended standard cordset, 2m, 4-pin, DC Micro (M12) connector. See page 15-10 for additional lengths. 889D-F4AC-2 Recommended standard cordset, 2m, 6-pin AC Micro connector. See page 15-10 for additional lengths. 889R-F6ACA-2 Open Closed Positive Opening Point 0˚ 88˚ 31˚ 15cNm 31˚ 15cNm88˚ 23-24 11-12 16˚16˚ 11-12 23-24 50˚50˚ 47˚88˚ 0˚ 88˚ 27˚ 10cNm 27˚ 10cNm 37˚ 37˚ 21-22 33-34 11-12 47˚ 88˚ 0˚ 88˚ 27˚ 10cNm 11-12 21-22 31-32 27˚ 10cNm47˚ 47˚ 37˚ 10cNm 37˚ 10cNm 21-22 33-34 11-12 47˚ 4.2 5N0mm 23-24 11-12 3.0 11-12 23-24 9.0 6.5 3.9 2N 9.00mm 11-12 33-34 21-22 5.6 5.3 0mm 11-12 21-22 31-32 3.8 2N 9. 05.3 4.0 9. 00mm 11-12 33-34 21-22 3.1 5.3 0˚ 88˚ 31˚ 15cNm 31˚ 15cNm88˚ 23-24 11-12 16˚16˚ 11-12 23-24 50˚50˚ 47˚88˚ 0˚ 88˚ 27˚ 10cNm 27˚ 10cNm 37˚ 37˚ 21-22 33-34 11-12 47˚ 88˚ 0˚ 88˚10cNm 11-12 21-22 31-32 10cNm47˚ 47˚ 27˚ 27˚ 17˚ 10cNm 17˚ 10cNm 21-22 33-34 11-12 47˚

Position Interlock Switches 7-5 Safety Limit Switches Small Plastic Senator Product Selection (continued) ➊ D4 suffix uses a 4-pin DC Micro (M12) connector. R6 suffix uses a 6-pin AC Micro (dual keyway) connector. ➋ Not positive opening Typical Wiring Diagrams ➌ T wo-Circuit T ype D4 4-Pin Micro Connector Three-Circuit Type R6 6-Pin Micro Connector ➌ See Product Selection tables for positive opening circuits. Operator Ty p e Contact Contact Ty p e Ty p i c a l Force/ To r q u e t o Operate Contact Opening Characteristics Catalogue Number Safety Aux. 1/2in NPT Conduit M20 Conduit Quick Disconnect ➊ Rubber Roller ➋ 1 N.C 1 N.O Snap Acting 0.15Nm 440P-CRRS11E 440P-CRRS11B 440P-CRRS11D4 2 N.C 1 N.O BBM 0.14Nm 440P-CRRB12E 440P-CRRB12B 440P-CRRB12R6 3 N.C. — — 0.14Nm 440P-CRRB03E 440P-CRRB03B 440P-CRRB03R6 2 N.C 1 N.O MBB 0.14Nm 440P-CRRM12E 440P-CRRM12B 440P-CRRM12R6 Recommended standard cordset, 2m, 4-pin, DC Micro (M12) connector. See page 15-10 for additional lengths. 889D-F4AC-2 Recommended standard cordset, 2m, 6-pin AC Micro connector. See page 15-10 for additional lengths. 889R-F6ACA-2 Connector Pinout 1 N.C. + 1 N.O. T erminal Contact 1 N.O. + 1 N.C. 11 1 N.C. 31 2 22 3 N.O. 42 4 Connector Pinout T erminal Contact T erminal Contact 11 1 N.C. N.C. 51 2 1 2 22 1 N.C. N.C. 62 2 2 2 33 3 N.O. N.C. 43 4 3 2 Open Closed Positive Opening Point 0˚ 88˚ 31˚ 15cNm 31˚ 15cNm88˚ 23-24 11-12 16˚16˚ 11-12 23-24 50˚50˚ 47˚88˚ 0˚ 88˚ 27˚ 10cNm 27˚ 10cNm 37˚ 37˚ 21-22 33-34 11-12 47˚ 88 0˚ 88˚ 27˚ 10cNm 11-12 21-22 31-32 27˚ 10cNm47˚ 47˚ 17˚ 10cNm 17˚ 10cNm 21-22 33-34 11-12 47˚ 1211 2423 Same Polarity 1112 2122 3334 1112 2122 3132 Auxiliary Circuit (N.O.) Safety Circuit 2 (N.C.) Safety Circuit 1 (N.C.)

Position Interlock Switches Safety Limit Switches Small Plastic Senator Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Roller Plunger Dome Plunger Hinge Lever Short Lever (1.10) 9.3 (0.36) Dia. 4.0 (0.15) 11.5 (0.45) (3.54) Max. (0.86) (0.78) (0.66) 4.0 (0.15) (0.47) (3.11) Max. (0.86) (0.78) (1.49) 4.0 (0.15) (0.19) 100 (3.93) Max. (0.86) (0.78) 15 (0.59) Dia. (1.96) 4.0 (0.15) 41 (1.61) 112 (4.4) (0.86) (0.78) 17.5 (0.68) Dia.

Position Interlock Switches 7-7 Safety Limit Switches Small Plastic Senator Approximate Dimensions—mm (inches) (continued) Dimensions are not intended to be used for installation purposes. Offset Hinge Adjustable Lever Rubber Roller (1.65) 12 (0.47) Dia. 4.0 (0.15) (0.47) 103 (4.05) (0.86) (0.78) (0.66) 45-90 (1.77-3.54) 17.5 (0.68) Dia. 4.0 (0.15) 106 (4.17) Min. (0.86) (0.78) 40 (1.57) 45-77 (1.77-3.03) 50 (1.96) Dia. 4.0 (0.15) 133 (5.23) Min. (0.86) (0.78) 40.7 (1.60)