T15 ALLEN-BRADLEY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Compact size, 75 x 52 x 32mm (2.95 x 2.05 x 1.26in) case
  • 30N actuator retention force
  • Strong and versatile, can be used in most applications
  • GD2 style available for demanding applications

Applications

Note: Lift-off guards require good alignment when using tongue actuated interlock switches. IMPORTANT: It must not be possible to lift the guard without actuating the interlock. An interlock on either side may be required. Specifications ➊ Conductive pollution occurs, or dry, non conductive pollution occur which becomes conductive due to condensation. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE marked for all applicable directives, cULus and TUV Nord Safety Contacts 2 N.C. or 1 N.C. direct opening action Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A Max. Switched Current/ Voltage/Load 500V/500VA Thermal Current (lth) 10A Min Current 5V 5mA DC Safety Contact Gap >2 x 2mm (0.078in) Rtd. Insulation Voltage (Ui) 500V Rtd. Impulse Withstand Volt. (Uimp) 2500V Auxiliary Contacts 1 N.O. Pollution Degree ➊ 3 Actuator Travel for Positive Opening 6mm (0.236in) Min Operating Radius 175mm (6.89in) 60mm (2.36in) with flexible actuator Break Contact Min Force 30N (6.7lb) Max Actuation Speed 160mm (6.29) per sec Max Actuation Frequency 2 Cycle per sec Case Material UL approved glass filled polybutylene terephthalate Actuator Material Stainless Steel Protection IP67 Conduit Entry 3 x M20 or quick disconnect style Operating T emperature -20°C to +80°C (-4°F to +176°F) Fixing 2 x M5 Mounting Any position Mechanical Life 1,000,000 operations Electrical Life 1,000,000 operations Weight 120g (0.265lbs) Colour Red

M20 Conduit Quick Disconnect Safety Aux. Standard 1/2in NPT Adaptor End Entry Standard 2 N.C. — Standard 440K-T11303 440K-T11267 440K-T11307 Fully-Flex 440K-T11395 440K-T11273 440K-T11384 — 440K-T11269 — 440K-T11385 1 N.C. 1 N.O. Standard 440K-T11305 440K-T11268 440K-T11386 Fully-Flex 440K-T11396 440K-T11276 440K-T11387 — 440K-T11270 — 440K-T11388 GD2 Front Entry 2 N.C. — Standard 440K-T11463 440K-T11288 440K-T11389 Fully-Flex 440K-T11397 440K-T11287 440K-T11390 — 440K-T11280 — 440K-T11391 1 N.C. 1 N.O. Standard 440K-T11398 440K-T11284 440K-T11392 Fully-Flex 440K-T11399 440K-T11283 440K-T11393 — 440K-T11279 — 440K-T11394 Recommended mating cable, 2m (6.5ft). See page 15-10 for details and additional lengths. 889D-F4AC-2 Description For Dimensions See Page Catalogue Number Standard Actuator (Standard model only) 14-5 440K-A11238 GD2 Standard Actuator (GD2 model only) 14-4 440G-A27011 Flat Actuator 14-5 440K-A11112

Accessories (continued) Optional Items Description For Dimensions refer to page Catalogue Number Alignment Guide with Semi-Flexible Actuator (Discard the Alignment Guide for GD2) 14-5 440K-A11144 Alignment Guide with Fully-Flexible Actuator (Discard the Alignment Guide for GD2) 14-6 440K-A27010 Sliding Bolt Actuator 14-4 440G-A27163 Catch and Retainer Kit (Standard Model Only) 14-4 440K-A11094 Alignment Guide and Flexible Actuator For use with flexible actuator Catch and Retainer Used to keep guards on vibrating machinery closed. 15° flexibility in any direction Plug In Connection The quick-disconnect option allows a quick connection facility.

Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Typical Wiring Diagrams (shown with guard closed, actuator inserted) Connector Pinout T erminal Contact T erminal Contact 11 1 N.C. N.C. 31 2 12 22 3 N.O. N.C. 42 4 2 2 GD2 Guides (1.26) (0.51) (0.59) 5 (0.2) 5.5 (0.22) (2.05) 20.5 (0.81) (1.57) (1.22) (0.62) 33.4 (1.31) 41 (1.61) 75 (2.95) (0.2) 5.5 (0.22) 20.5 (0.81) 15.75 (0.62) Fixing holes for M5 screws 1123 1224 1121 1222 0mm 6.5 20 15 10 6 0mm 20 15 10 6Contact Open Contact Closed Actuator withdrawal distance from full insertion Contact Action