440K-E33036 ALLEN-BRADLEY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- Ideal for small, light weight guards
- The smallest interlock switch available
- Eight possible actuator entry points, easy to install
- Environmental protection: IP67
Applications
Note: Lift-off guards require good alignment when using tongue actuated interlock switches. IMPORTANT: It must not be possible to lift the guard without actuating the interlock. An interlock on either side may be required. Specifications ➊ Conductive pollution occurs, or dry, non conductive pollution occurs which becomes conductive due to condensation. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE marked for all applicable directives, cULus and BG Safety Contacts 1 N.C. or 2 N.C. direct opening action Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A Thermal Current (lth) 10A Minimum Current 5V 5mA DC Safety Contact Gap >2mm (0.078in) Rtd. Impulse withstand Volt. (Uimp) 2500V Auxiliary Contacts 1 N.O. Pollution Degree ➊ 3 Actuator Travel for Positive Opening 3.6mm (0.141in) Min Operating Radius 150mm (5.90in) 60mm (2.36in) with GD2 kit Break Contact Min Force 6N (1.35lb) Max Actuation Speed 160mm (6.29in) per sec Max Actuation Frequency 2 Cycle per sec Case Material UL approved glass filled polyester Actuator Material Stainless Steel Protection IP67 Conduit Entry 1 x M16 or quick-disconnect style Operating T emperature -20°C to +80°C (-4°F to +176°F) Fixing 2 x M4 Mounting Any position Mechanical Life 1,000,000 operations Electrical Life 1,000,000 operations Weight 60g (2.11oz) Colour Red
1 N.C. 1 N.O. BBM Flat 440K-E33036 440K-E33029 440K-E33074 90° 440K-E33040 440K-E33030 440K-E33025 GD2 Metal Align. Guide w/Semi-Flex Actuator — 440K-E33031 440K-E33075 — 440K-E33014 — 440K-E33076 2 N.C. — — Flat 440K-E33080 440K-E33037 440K-E33077 90° 440K-E33041 440K-E33045 440K-E33024 GD2 Metal Align. Guide w/Semi-Flex Actuator — 440K-E33046 440K-E33078 — 440K-E33047 — 440K-E33079 Recommended mating cable, 2m (6.5ft). See page 15-10 for details and additional lengths. 889D-F4AC-2 Description For Dimensions See Page Catalogue Number Flat Actuator 14-6 440K-A21014 90° Actuator 14-6 440K-A21006 GD2 Metal Alignment Guide with Semi-Flexible Actuator 14-6 440K-A21030 Alignment Guide 14-6 440K-A21069 Mounting Plate 14-6 440K-A33624
Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. Typical Wiring Diagrams (shown with guard closed, actuator inserted) Connector Pinout T erminal Contact T erminal Contact 11 1 N.C. N.C. 31 2 1 2 22 3 N.O. N.C. 42 4 2 2 25 (0.98) End Entry 4 (0.16) 4.5 (0.18) 6 (0.24) (0.24) 75 (2.95) 17.5 (0.69) 29 (1.14) 12.5 (0.49) 1 x M16 12.5 (0.49) (0.71) 16.5 (0.65) (0.12) Front Entry 34.5 (1.36) 36 (1.42) R 2.1 (0.24) (0.51) (2.95) 25 (0.98) Actuator withdrawal distance from full insertion Contact Open Contact Closed 60 m m 4.2 3.8 60 m m 4
GD2 Metal Alignment Guide with semi-flexible actuator Head Position 1 T op entry Head Position 2 Head Position 3 Head Position 4 Front entry Bottom entryFront entry Front entry Side entry Side entry Front entry 8 possible actuator entry points The head rotates 360° in 90° increments to give 8 possible actuator entry points. 90° actuator Flat actuator