440K-C21096 ALLEN-BRADLEY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • C o m p a c t s i z e
  • Ideal for small, light weight guards
  • S e a l e d t o I P 6 7
  • Eight possible actuator entry points, easy to install
  • Industry standard fixing centres to DIN 50047

Applications

Note: Lift-off guards require good alignment when using tongue actuated interlock switches. IMPORTANT: It must not be possible to lift the guard without actuating the interlock. An interlock on either side may be required. Specifications ➊ Conductive pollution occurs, or dry, non conductive pollution occur which becomes conductive due to condensation. Standards EN954-1, ISO13849-1, IEC/EN60204-1, NFPA79, EN1088, ISO14119, IEC/ EN60947-5-1, ANSI B11.19, AS4024.1 Category Cat. 1 Device per EN954-1 Dual channel interlocks suitable for Cat. 3 or 4 systems Approvals CE marked for all applicable directives, cULus, TUV Nord Safety Contacts 2 N.C. or 3 N.C. direct opening action Designation/Utilization Cat. A600/AC-15 (Ue) (Ie) N600/DC-13 (Ue) (Ie) 600V 500V 240V 120V 1.2A 1.4A 3A 6A 600V 500V 250V 125V 0.4A 0.55A 1.1A 2.2A Thermal Current (lth) 10A Min Current 5V 5mA DC Typical Contact Resistance 5m Ω Rtd. Insulation Voltage (Ui) 500V Rtd. Impulse Withstand Volt. (Uimp) 2500V Auxiliary Contacts 1 N.O. Pollution Degree ➊ 3 Actuator Travel for Positive Opening 5mm (0.098in) Min Operating Radius 150mm (5.905in) (60mm (2.36in) with GD2 kit) Break Contact Min Force 15N (3.38pd) Max Actuation Speed 160mm (6.299) per sec Max Actuation Frequency 2 Cycle per sec Case Material UL approved glass filled polyester Actuator Material Stainless Steel Protection IP67 Conduit Entry 1 x M16 or quick-disconnect style Operating T emperature -20°C to + 80°C (-4°F to +176°F) Fixing 2 x M4 Mounting Any position Mechanical Life 1,000,000 operations Electrical Life 1,000,000 operations Weight 80g (0.176lbs) Colour Red

1/2in Adaptor Quick Disconnect 3 N.C. — — Flat 440K-C21096 440K-C21048 440K-C21090 90° 440K-C21097 440K-C21057 440K-C21091 GD2 Metal Alignment Guide with Semi- Flex Actuator — 440K-C21062 440K-C21092 — 440K-C21070 — — 2 N.C. 1 N.O. BBM Flat 440K-C21098 440K-C21050 440K-C21054 90° 440K-C21061 440K-C21058 440K-C21067 GD2 Metal Alignment Guide with Semi- Flex Actuator — 440K-C21074 440K-C21088 — 440K-C21055 — — MBB Flat 440K-C21052 440K-C21093 440K-C21060 90° 440K-C21065 440K-C21094 440K-C21068 GD2 Metal Alignment Guide with Semi- Flex Actuator — 440K-C21095 440K-C21089 — 440K-C21080 — — Recommended mating cable, 2m (6.5ft). See page 15-11 for details and additional lengths. 889R-F6ACA-2 Description For Dimensions See Page Catalogue Number Flat Actuator 14-6 440K-A21014 90° Actuator 14-6 440K-A21006 GD2 Metal Alignment Guide with Semi-Flexible Actuator 14-6 440K-A21030

Approximate Dimensions—mm (inches) Dimensions are not intended to be used for installation purposes. M16 Thread Form 31.0 (1.22) 34.4 (1.35) 38.4 (1.51) 90.5 (3.56) R 2.15 Front Entry 4 (0.16) 4.5 (0.18) 25.0 (0.98) 30.4 (1.2) 4.5 (0.18) (0.16) 13.0 (0.51) 20.0 (0.79) 22.0 (0.87) 25.0 (0.98) 13.0 (0.51) 13.0 (0.51) 36.4 (1.43)

Typical Wiring Diagrams (shown with guard closed, actuator inserted) Connector Pinout T erminal Contact T erminal Contact 11 1 N.C. 11 N.C.51 2 1 2 22 1 N.C. 21 N.C.62 2 2 2 33 3 N.O. 31 N.C.43 4 3 2 Contact Open Contact Closed Actuator withdrawal distance from full insertion 3.8 0mm 4.5 3.8 3.3 0mm 3.8 0mm 2 N.C. + 1 N.O. (MBB) Contact Action