1N5559 NJSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
CX *y 20 STERN AVE. SPRINGFIELD, NEW JERSEY 07081 U.S.A. TELEPHONE: (973) 376-2922 (212)227-6005 FAX: (973) 376-8960 DO-41 Case DO-41 Case Typet 1NS559 1N5560 1N5561 1N5562
1 N5563
1 N5573
Vz <5> Izr V 6.8 7.5 8.2 9.1 10.0 Test Current Izr mA 14.0 12.0 11.0 10.0 9.5 8.5 7.5 Maximum} Dynamic . Impedance . ZZT <S> Izr Typical Temperature Coefficient %/'C — . tStandard tolerances of 5.0, 10, and 20% are available — no suffix is ±20% tolerance, "A" suffix is ±10% tolerance, and "B" suffix is ±5.0% tolerance. JZener impedance Is derived from the 1kHz voltage created when AC current with RMS value of 10% of DC zener test current is superimposed on the test current. DO-41 Case Typet 1N4400 1N4401 1N4402 1N4403 1N4404 1N4405 1N4406
1 N4407
1 N4424
Vz @ Izi V 6.8 7.5 8.2 9.1 10.0 Test Current IZT mA 14.0 12.0 11.0 10.0 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 Maximum^ Dynamic Impedance Zzi @ lz> o 2.0 2.0 2.0 2.5 3.0 3.5 4.0 5.0 6.0 8.0 Typical Temperature Coefficient Tc %/°C _... — • tStandard tolerances of 5.0, 10, and 20% are available — no suffix is ±20% tolerance, "A" suffix is ±10% tolerance, and "B" suffix is ±5.0% tolerance. }Zener impedance is derived from the 1kHz voltage created when AC current with RMS value of 10% of DC zener test current is superimposed on the test current. NJ Semi-Conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by NJ Semi-Conductors is believed to be both accurate and reliable at the time of going to press. However, NJ Semi-Conductors assumes no responsibility for any errors or omissions discovered in its use. NJ Semi-Conductors encourages customers to verify that datasheets are current before placing orders. Qualify Semi-Conductors