42115 MICROPAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com
42115 OPERATIONAL AMPLIFIER
DSCC DWG #5962-9082801 Replacement for OPA511 and PA 10 Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features:
- Wide Supply Voltage Range (±10 to ±50 Volts)
- High Output Current (5A Peak)
- Small Size (TO-3, 8 Pins)
- Low Cost Applications:
- Programmable Power Supplies
- Motor, Valve & Actuator Controls
- Audio Amplifiers
- Magnetic Deflection Circuits
DESCRIPTION
The 42115 ( DSCC Drawing #5962-9082801) is a high power, high voltage, high current, power operational amplifier which also is an alternate to the popular OPA511 and PA10. The high current output stage delivers 5A and has externally adjustable current limiting capability. This Hybrid IC is housed in an 8 pin, hermetic TO-3 and is designed for driving inductive, capacitive and resistive loads. ABSOLUTE MAXIMUM RATINGS
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 42115 OPERATIONAL AMPLIFIER DESC DWG #5962-9082801 Mechanical Configuration A C K B E R J H Q G D SEATING PLANE F 1 2 3 Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane Pin Numbers shown for reference only. Numbers may not be marked on package. INCHES MILLIMETERS ELECTRICAL CONNECTIONS DIM MIN MAX MIN MAX Pin 1 Output A 1.510 1.550 38.35 39.37 Pin 2 CL + B 0.760 0.780 19.30 19.81 Pin 3 +VC C 0.290 7.37 Pin 4 +IN D 0.97 1.07 0.038 0.042 Pin 5 -IN E 0.080 0.100 2.03 2.54 Pin 6 -VS F 40º BASIC 40º BASIC Pin 7 F.O. G .500 BASIC 12.7 BASIC Pin 8 CL- H 1.186 BASIC 30.12 BASIC J .593 BASIC 15.06 BASIC K 0.460 0.500 11.68 12.70 Q 0.151 0.161 3.84 4.09 R 0.990 1.010 25.15 25.65
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 42115 OPERATIONAL AMPLIFIER DESC DWG #5962-9082801
ELECTRICAL CHARACTERISTICS
TC = 25° C, VCC = ±36 VDC unless otherwise specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Offset Voltage VIO TC = 25°C TC = -55°C to +125°C ±10 ±65 mV uV/ºC Input Offset Voltage vs Supply VIO (VCC) ±30 ±200 µV/V Input Offset Voltage vs Power VIO (P) ±20 µV/W Input Bias Current IB+, IB- TC = 25°C TC = -55°C to +125°C 50 400 nA pA/°C Input Bias Current vs Supply IB (VCC) 10 pA/V Input Offset Current II0 TC = 25°C TC = -55°C to +125°C 30 nA pA/°C Input Impendance RIN 200 MΩ Gain Bandwidth Product @ 1 MHz GB TC = 25°C RL = 15Ω
6 MHz *
Power Bandwidth PB TC = 25°C RL = 8Ω 15 23 KHz Phase Margin Im -55°C to +125°C RL = 15Ω
20 Degree *
CMRR VICM = ±9V VCC = ±15V, RL = 500 -55°C to +125°C 96 DB Output Voltage/ Voltage Swing V0 I0 = 10A, VCC = ±16V RL = 1Ω ±10 V Output Voltage Swing V0 TC = 25°C, I0 =5A I0 = 80mA -55º to +125ºC ±VCC –8 ±VCC -5 4.0 V V Open Loop Gain AV RL = 1Kf = 10Hz 110 dB Slew Rate @ 20% of V0 SR RL = 100Ω, RCL = 0 VIN = 40 VP-P square wave f = 1kHz, V0 = 40 VP-P 2.5 5.0 V/µS Power Supply VCC -55°C to +125°C ±10 ±40 ±50 V Quiescent Current IS VIN = 0.G = 100 8 15 30 mA