42109 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/17/01 42109 OPERATIONAL AMPLIFIER DSCC DWG #5962-9065901 Replacement for PA12 Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features:

  • Wide Supply Voltage Range (±10 to ±50 Volts)
  • High Output Current (15A Peak)
  • Small Size (TO-3, 8 Pins)
  • Low Cost Applications:
  • Motor, Valve and Actuator Control
  • Magnetic Deflection Circuits
  • Audio Amplifiers
  • Power Transducers

DESCRIPTION

The 42109, DSCC drawing #5962-9065901 is a high power, high voltage, high current, power operational amplifier and is a replacement for the PA12. The Op Amp is designed to drive capacitive, inductive and sensitive loads. The device is complete with current limiting using external resistors, and fabricated using hybrid techniques to maximize reliability, minimize size and give top performance. ABSOLUTE MAXIMUM RATINGS

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/17/01 42109 OPERATIONAL AMPLIFIER DESC DWG #5962-9065901 Mechanical Configuration A C K B E R J H Q G D SEATING PLANE F 1 2 3 Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane Pin Numbers shown for reference only. Numbers may not be marked on package. INCHES MILLIMETERS ELECTRICAL CONNECTIONSDIM MIN MAX MIN MAX Pin 1 Output 1 A 1.510 1.550 38.35 39.37 Pin 2 CL + B 0.760 0.780 19.30 19.81 Pin 3 +VC C 0.290 7.37 Pin 4 +IN D 0.97 1.07 0.038 0.042 Pin 5 -IN E 0.080 0.100 2.03 2.54 Pin 6 -VC F 40º BASIC 40º BASIC Pin 7 N.C. G .500 BASIC 12.7 BASIC Pin 8 CL- H 1.186 BASIC 30.12 BASIC J .593 BASIC 15.06 BASIC K 0.460 0.500 11.68 12.70 Q 0.151 0.161 3.84 4.09 R 0.990 1.010 25.15 25.65

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/17/01 42109 OPERATIONAL AMPLIFIER DESC DWG #5962-9065901

ELECTRICAL CHARACTERISTICS

TC = 25° C, VCC = ±36 VDC unless otherwise specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Offset Voltage VIO TC = 25°C TC = -55°C to +125°C ±65 mV uV/ºC Input Offset Voltage vs Supply VIO (VCC) ±200 µV/V Input Offset Voltage vs Power VIO (P) ±20 µV/W Input Bias Current IB+, IB- TC = 25°C TC = -55°C to +125°C 400 nA nA/°C Input Bias Current vs Supply IB (VCC) TC = 25°C 10 PA/V Input Offset Current II0 TC = 25°C TC = -55°C to +125°C 50 30 pA nA/°C Input Impendance RIN TC = 25°C 200 MΩ Gain Bandwidth Product @ 1 MHz GB TC = 25°C RL = 8Ω

4 MHz

Power Bandwidth PB RL = 8Ω 13 20 kHz Phase Margin Im -55°C to +125°C RL = 8Ω

45 Degree

CMRR VICM = ±9V VCC = ±15V, RL = 500 74 dB Output Voltage/ Voltage Swing V0 I0 = 10A, VCC = ±16V RL = 1Ω ±10 V Output Voltage Swing V0 TC = 25°C, I0 =5A I0 = 80mA Full Temp Range ±VCC - 5 V Open Loop Gain AV RL = 250Ω, f = 10HZ 94 dB Slew Rate @ 20% of V0 SR RL = 100Ω, RCL = 0 VIN = 40 VP-P square wave f = 1kHz, V0 = 40 VP-P 2.5 4.0 V/µS Power Supply VCC -55°C to +125°C ±10 ±40 ±50 V Quiescent Current IS VIN = 1.G = 100 TC = 25°C 25 50 mA