42106 MICROPAC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01
42106 OPERATIONAL AMPLIFIER
DSCC DWG #5962-8762001 (Replacement for OP501, PA51) Mii HYBRID MICROELECTRONICS PRODUCTS DIVISION Features:
- Wide Supply Voltage Range (±10 to ±40 Volts)
- High Output Current (10A Peak)
- Small Size (TO-3, 8 Pins)
- Low Cost Applications:
- Valve and Actuator Control
- DC or AC Power Regulator
- Motor/Synchro Driver
- DC Servo Amplifier
DESCRIPTION
The 42106 is a high power, high voltage, high current, power operational amplifier and is a replacement for the PA51 & OPA501. They are designed to drive capacitive, inductive and sensitive loads. The devices are complete with current limiting using external resistors, and fabricated using hybrid techniques to maximize reliability, minimize size and give top performance. ABSOLUTE MAXIMUM RATINGS
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 42106 OPERATIONAL AMPLIFIER DESC DWG #5962-8762001 Mechanical Configuration A C K B E R J H Q G D SEATING PLANE F 1 2 3 Note: Leads in true position with 0.010” (0.25mm) R at MMC at seating plane Pin Numbers shown for reference only. Numbers may not be marked on package. INCHES MILLIMETERS ELECTRICAL CONNECTIONSDIM MIN MAX MIN MAX Pin 1 Output 1 A 1.510 1.550 38.35 39.37 Pin 2 CL + B .745 .770 18.92 19.56 Pin 3 +VC C .260 .300 6.60 7.62 Pin 4 +IN D .038 .042 0.97 1.07 Pin 5 -IN E .080 .105 2.03 2.67 Pin 6 -VC F 40º BASIC 40º BASIC Pin 7 N.C. G .500 BASIC 12.7 BASIC Pin 8 CL- H 1.186 BASIC 30.12 BASIC J .583 BASIC 15.08 BASIC K .400 .500 10.16 12.70 Q .151 .161 3.84 4.09 R .980 1.020 24.89 25391
Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 42106 OPERATIONAL AMPLIFIER DESC DWG #5962-8762001
ELECTRICAL CHARACTERISTICS
TC = 25° C, VCC = ±36 VDC unless otherwise specified PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Input Offset Voltage VIO TC = 25°C TC = -55°C to +125°C ±40 mV uV/ºC Input Offset Voltage vs Supply VIO (VCC) ±35 µV/V Input Offset Voltage vs Power VIO (P) ±20 µV/W Input Bias Current IB+, IB- TC = 25°C TC = -55°C to +125°C .05 20 nA nA/°C Input Bias Current vs Supply IB (VCC) .02 nA/V Input Offset Current II0 TC = 25°C TC = -55°C to +125°C .01 3 nA nA/°C Input Impendance RIN 250 MΩ Gain Bandwidth Product @ 1 MHz GB 1 MHz Power Bandwidth PB TC = 25°C, I0 = 40VP-P, I0 = 8.0A 10 16 kHz Phase Margin Im -55°C to +125°C 45 Degree Common Mode Rejection Ratio CMRR VICM = ±15V TC = 25°C TC = -55°C to +125°C dB dB Output Voltage V0 VIN = 400 mVP-P square wave VCC = ±22V RL = 75Ω, RCL = 0 ±17 V Output Voltage Swing V0 TC = 25°C, I0 =10A I0 = 4A -55°C to +125°C ±VCC - 8V ±VCC - 6V V V Open Loop Gain AV RL = 250Ω, f = 10HZ 94 dB Slew Rate @ 20% of V0 SR RL = 100Ω, RCL = 0 VIN = 40 VP-P square wave f = 1kHz, V0 = 40 VP-P
1.0 V/µS
Power Supply VCC -55°C to +125°C ±10 ±36 ±40 V Quiescent Current IS TC = 25°C 2.6 10 mA