42050 MICROPAC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01

42050 POSITIVE VOLTAGE REGULATORS

Features:

  • Output Current To 10 Amps
  • Output Voltage To 34 V
  • Internal Short Circuit Protection
  • Custom Output Voltages available Applications:
  • Designed for use in general purpose applications.
  • Military And Hi Rel Industrial Applications Where Hermetically Sealed Product Is Required

DESCRIPTION

The 42050 series of regulators covers the output voltage range from 5 VDC through 34 VDC. These regulators are fabricated using hybrid techniques. The devices are complete with internal short circuit protection, which includes voltage shutdown and current fold back. The 42050 series regulators are complete and normally do not require any additional components. However, if the regulator is far from the power source a .2 µf capacitor on the input is suggested. ABSOLUTE MAXIMUM RATINGS Mechanical Configuration 0.83 MAX DIA.

1.550 MAX

0.450 MAX 0.135 MAX 0.470 0.440 1.197 1.177 0.440 0.420 0.161 0.151 0.225 0.205 0.675 0.655 SEATING PLANE 0.039 0.043 DIA DIA PIN FUNCTION GROUND1 V2 OUT CASE INV

Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. HYBRID MICROELECTRONICS PRODUCTS DIVISION • 905 E. Walnut St., Garland, TX 75040 • (972) 272-3571 • Fax (972) 494-2281 www.micropac.com E-MAIL: hybridsales@micropac.com 05/16/01 42050 POSITIVE VOLTAGE REGULATORS ELECTRICAL CHARACTERISTICS (Note 1) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT Output Voltage VOUT IOUT = 1A, VIN – VO = 5 V VOUT -0.1 V VOUT VOUT +0.1 V VDC Differential Voltage VIN - VOUT ∆V IOUT = IMAX 5 VDC Line Regulation (Note 3) VIN – VO = 5 V to VIN = 40 V IOUT = .5 A 0.1 % VOUT Load Regulation (Note 2) IOUT = .5 A to IOUT = IMAX VIN = VOUT + 5 V 40 mV Ripple Rejection f = 50 to 500 Hz 1.0Vpp VIN – VO = 5 V 60 dB Temperature Coefficient TC 0°C ≤ TC ≤ 100°C .05 %/°C Standby Current IS 25 mA Thermal Resistance θjc 1 °C/W Long Term Stability 0.1 %/1000 hrs Note 1: Case temperature 25°C unless otherwise specified. Note 2: Voltage measured at Pin 2 within .05 inches from case. Note 3: Instantaneous regulation, average chip temperature changes must be accounted for separately.

42050 HYBRID VOLTAGE REGULATOR DEVICES

TYPE VOUT (VDC) MAX IOUT (A) IKNEE TYP(A) ISC TYP(A) 42050 - 055 5 5 6.5 2.5 510 5 10 13 3.5 610 6 10 13 3.5 710 7 10 13 3.5 810 8 10 13 3.5 910 9 10 13 3.5 109 10 9 13 3.5 128 12 8 10 3 148 14 8 10 3 158 15 8 10 3 168 16 8 10 3 188 18 8 10 3 208 20 8 10 3 224 22 4 5.5 2 244 24 4 5.5 2 264 26 4 5.5 2 284 28 4 5.5 2 304 30 4 5.5 2 324 32 4 5.5 2 344 34 4 5.5 2