411-501-21 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC DC INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA lp Topr Tstg 411-501-21 Red Colour Diffused 12 20 11000 643 -0 ~ +85^ -0 ~ +85 Yes 411-521-21 Yellow Colour Diffused 12 20 16000 591 -0 ~ +85^ -0 ~ +85 Yes 411-532-21 Green Colour Diffused 12 20 23000 527 -0 ~ +85^ -0 ~ +85 Yes 411-930-21 Blue Colour Diffused 12 20 7000 470 -0 ~ +85^ -0 ~ +85 Yes 411-997-21 Cold White Colour Diffused 12 20 14000 *see below -0 ~ +85^ -0 ~ +85 Yes 411-501-23 Red Colour Diffused 24-28 17.5 11000 643 -0 ~ +85^ -0 ~ +85 Yes 411-521-23 Yellow Colour Diffused 24-28 17.5 16000 591 -0 ~ +85^ -0 ~ +85 Yes 411-532-23 Green Colour Diffused 24-28 17.5 23000 527 -0 ~ +85^ -0 ~ +85 Yes 411-930-23 Blue Colour Diffused 24-28 17.5 7000 470 -0 ~ +85^ -0 ~ +85 Yes 411-997-23 Cold White Colour Diffused 24-28 17.5 14000 *see below -0 ~ +85^ -0 ~ +85 Yes UNITS Vdc mA mcd nm 0C 0C l Front panel replaceability l Must be used in conjunction with 907-000-00 p anel socket. See datasheet DS084/04 l Domed fresnel lens for wide angle viewing l Sealed to IP40 l Product illustrated 411-532-22 in the 907-000-00 panel mounting socket PANEL INDICATOR LEDs - Ø8.0mm Mounting Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
411 SERIES
PACK QUANTITY = 20 PIECES SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS081/07 Issue 1 Page 1 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cold white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 HIGH INTENSITY
Termination Pins Tin on Nickel Plated Phosphor Bronze Fresnel lens Polycarbonate Header Nylon 6 Rear Retainer Spring Steel Mounting Hardware Use with socket 907-000-00. Use wth socket 908-000-00 when diode test facility is specified BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 Page 2 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SERIES MAXIMUM MAXIMUM PANEL MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 411 500 3 8.0 17.0 13.0 UNITS mW Vdc mm mm mm Dimensions in mm (Typical) Not to scale Key denotes cathode PANEL SOCKETS & CONNECTORS 6.9 Ø8.4 Ø7.0 Ø6.3 0.7 Sq 4.2 22.0 Key 5.1 909-000-00 is gold plated 910-000-00 is tin plated for use with 907 and 908 series p anel sockets. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance and gas tight electrical contact. Dimensions in mm (Typical) Not to scale 411 SERIES Lens Body Washer Panel Socket Rear Retainer Termination 907 SOCKET 8.0 MOUNTING HOLE Mounting hole to be clean and burr free
BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 Page 3 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Optional Diode Test Facility 532, 930 & 997 521 De-rating Information ORDER CODE TERMINATION CIRCUIT COMMENTS SUFFIX 03 3 PIN 908-000-00 Socket 05 150mm of flying leads colours as shown (att ached to 908-000-00) TEST 09 1000mm of flying leads colours as shown (att ached to 908-000-00) POSITIVE Not available with Bi-colour 04 3 PIN 908-000-00 Socket LED 06 150mm of flying leads colours as shown (att ached to 908-000-00) TEST 10 1000mm of flying leads colours as shown (att ached to 908-000-00) NEGATIVE 501 Test Positive Test Negative Test Anode Cathode Identification Mark Test Anode Cathode Identification Mark Optional Reverse Protection Diode ORDER CODE CIRCUIT COMMENTS SUFFIX
01 Available on all indicators except Bi-Colour
devices and when diode test is specified.
BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 081/07 Issue 1 Page 4 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NO. COLOUR VOLTAGE (Vdc) Vopr 411-000-22-50 Red/Yellow 24Vdc 411-501-04 Red 20mA 411-501-04-03 Red 20mA 411-501-22 Red 24Vdc 411-501-22-03 Red 24Vdc 411-501-22-04 Red 24Vdc 411-501-24 Red 48Vdc 411-501-24-03 Red 48Vdc 411-501-24-04 Red 48Vdc 411-501-75 Red 110Vac 411-501-75-03 Red 110Vac 411-501-76 Red 230Vac 411-503-20 Red 5/6Vdc 411-503-20-03 Red 5/6Vdc 411-503-21 Red 12Vdc 411-503-21-04 Red 12Vdc 411-503-22 Red 24Vdc 411-503-22-03 Red 24Vdc 411-503-22-04 Red 24Vdc 411-503-22-05 Red 24Vdc 411-503-22-50 Red 24Vdc 411-503-22-51 Red 24Vdc 411-503-23 Red 24-28Vdc 411-503-24-03 Red 48Vdc 411-503-76 Red 230Vac 411-506-20-03 Orange 5/6Vdc 411-506-22 Orange 24Vdc 411-506-22-03 Orange 24Vdc 411-506-22-04 Orange 24Vdc 411-506-22-51 Orange 24Vdc 411-506-23 Orange 24-28Vdc 411-506-75 Orange 110Vac 411-506-76-15 Orange 230Vac 411-509-20 Yellow 5/6Vdc 411-509-21 Yellow 12Vdc 411-509-21-50 Yellow 12Vdc 411-509-22 Yellow 24Vdc UNITS Part numbers also available in the 411 Series: The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information cont ained within this datasheet. Please contact sales for further information. PART NO. COLOUR VOLTAGE (Vdc) Vopr 411-509-22-03 Yellow 24Vdc 411-509-22-04 Yellow 24Vdc 411-509-22-05 Yellow 24Vdc 411-509-22-52 Yellow 24Vdc 411-509-23 Yellow 24-28Vdc 411-512-20 Green 5/6Vdc 411-512-21 Green 12Vdc 411-512-21-04 Green 12Vdc 411-512-22 Green 24Vdc 411-512-22-03 Green 24Vdc 411-512-22-04 Green 24Vdc 411-512-22-05 Green 24Vdc 411-512-22-51 Green 24Vdc 411-512-24-03 Green 48Vdc 411-519-22 Blue 24Vdc 411-519-22-03 Blue 24Vdc 411-519-22-50 Blue 24Vdc 411-521-22 Yellow 24Vdc 411-521-22-03 Yellow 24Vdc 411-521-22-04 Yellow 24Vdc 411-521-24-04 Yellow 48Vdc 411-521-76-13 Yellow 230Vac 411-532-04 Green 20mA 411-532-22 Green 24Vdc 411-532-22-03 Green 24Vdc 411-532-22-04 Green 24Vdc 411-532-24-03 Green 48Vdc 411-532-76 Green 230Vac 411-532-76-13 Green 230Vac 411-532-76-15 Green 230Vac 411-930-22 Blue 24Vdc 411-930-22-03 Blue 24Vdc 411-930-22-50 Blue 24Vdc 411-997-22 White 24Vdc 411-997-22-03 White 24Vdc 411-997-43 White 18Vdc 411-997-76 White 230Vac UNITS