DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

w .moxa.com MGate 4101-MB-PBS Series 1-port Modbus RTU/ASCII-to-PROFIBUS slave gateways Features and Benefits

  • Protocol conversion between Modbus and PROFIBUS
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII master and slave
  • Windows utilities with innovative QuickLink function for automatic configuration within minutes
  • Status monitoring and fault protection for easy maintenance
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • Supports redundant dual DC power inputs and 1 relay output
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection (for “-I” models) Certifications Introduction The MGate 4101-MB-PBS gateway provides a communication portal between PROFIBUS PLCs (e.g., Siemens S7-400 and S7-300 PLCs) and Modbus devices. With the QuickLink feature, I/O mapping can be accomplished within a matter of minutes. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer optional built-in optical isolation. QuickLink and Windows Utilities for Easy Setup and Traffic Monitoring The QuickLink windows utility uses a serial console port to connect to the MGate 4101-MB-PBS and makes configuration and operation as easy as possible. QuickLink can finish the configuration in just a few minutes by passively detecting Modbus requests with the AutoLearning function, and performs error-free I/O mapping with the AutoMapping feature. QuickLink drastically reduces Modbus-to-PROFIBUS integration time when compared to conventional I/O mapping, which can easily require days to complete. Additionally, embedded monitoring tools can maintain logs of Modbus communication packets and assist in troubleshooting. Redundant Power Inputs The MGate 4101-MB-PBS has dual power inputs for greater reliability. The power inputs allow simultaneous connection to 2 live DC power sources, so that continuous operation is provided even if one power source fails. The higher level of reliability makes these advanced Modbus-to- PROFIBUS gateways ideal for demanding industrial applications. Warning by Relay Output A relay output is provided for the power input status. The relay output gives maintenance engineers an additional tool for troubleshooting and maintenance. Specifications Serial Interface Console Port RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1) No. of Ports 1 Connector DB9 male Serial Standards RS-232/422/485 Baudrate 50 bps to 921.6 kbps Data Bits 7, 8

w .moxa.com Parity None, Even, Odd, Space, Mark Stop Bits 1, 2 Flow Control DTR/DSR, RTS/CTS RS-485 Data Direction Control ADDC® (automatic data direction control) Pull High/Low Resistor for RS-485 1 kilo-ohm, 150 kilo-ohms Terminator for RS-485 120 ohms Isolation 2 kV (I models) Serial Signals RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND RS-422 Tx+, Tx-, Rx+, Rx-, GND RS-485-2w Data+, Data-, GND RS-485-4w Tx+, Tx-, Rx+, Rx-, GND Serial Software Features Configuration Options MGate Manager Industrial Protocols Modbus RTU/ASCII Master, Modbus RTU/ASCII Slave, PROFIBUS DP-V0 Slave Modbus RTU/ASCII Mode Master, Slave Functions Supported 1, 2, 3, 4, 5, 6, 15, 16, 23 Max. No. of Commands 100 Input Data Size 7744 bytes Output Data Size 7744 bytes PROFIBUS Interface Industrial Protocols PROFIBUS DP No. of Ports 1 Connector DB9 female Baudrate 9600 bps to 12 Mbps Isolation 2 kV (built-in) Signals PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V PROFIBUS Rotary Switch PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration) Mode DP-V0 Slave Max. No. of Master Connections 1 Max. No. of PROFIBUS I/O Modules 24 per page Max. No. of PROFIBUS Pages 32

w .moxa.com Input Data Size 7744 bytes Output Data Size 7744 bytes Power Parameters Input Voltage 12 to 48 VDC Input Current 275 mA @ 12 VDC Power Connector Screw-fastened Euroblock terminal Relays Contact Current Rating Resistive load: 1 A @ 24 VDC Physical Characteristics Housing Metal Dimensions 36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in) Weight 500 g (1.10 lb) IP Rating IP30 Note: It is recommended to attach the M3x3mm Nylok screws at the rear side Environmental Limits Operating Temperature MGate 4101I-MB-PBS: 0 to 60°C (32 to 140°F) MGate 4101I-MB-PBS-T: -40 to 75°C (-40 to 167°F) MGate 4101-MB-PBS: 0 to 60°C (32 to 140°F) MGate 4101-MB-PBS-T: -40 to 75°C (-40 to 167°F) Storage Temperature (package included) -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) Standards and Certifications Safety EN 60950-1, UL 60950-1, EN 62368-1, UL 62368-1 EMC EN 55032/35 EMI CISPR 32, FCC Part 15B Class A EMS IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF Hazardous Locations ATEX, Class I Division 2, IECEx Freefall IEC 60068-2-32 Shock IEC 60068-2-27 Vibration IEC 60068-2-6, IEC 60068-2-64 MTBF Time MGate 4101-MB-PBS Series: 1,537,948 hrs MGate 4101I-MB-PBS Series: 1,315,666 hrs Standards Telcordia SR332

w .moxa.com Warranty Warranty Period 5 years Details See www.moxa.com/warranty Package Contents Device 1 x MGate 4101-MB-PBS Series gateway Cable 1 x RJ45-to-DB9 console cable Installation Kit 1 x DIN-rail kit Documentation 1 x quick installation guide 1 x warranty card Dimensions

Ordering Information

Model Name Serial Isolation Operating Temp. MGate 4101-MB-PBS – 0 to 60°C MGate 4101I-MB-PBS 2 kV 0 to 60°C MGate 4101-MB-PBS-T – -40 to 75°C MGate 4101I-MB-PBS-T 2 kV -40 to 75°C Accessories (sold separately) Cables CBL-F9M9-150 DB9 female to DB9 male serial cable, 1.5 m CBL-F9M9-20 DB9 female to DB9 male serial cable, 20 cm CBL-RJ45F9-150 RJ45 to DB9 female serial cable, 1.5 m CBL-RJ45SF9-150 RJ45 to DB9 female serial shielded cable, 1.5 m

w .moxa.com Connectors Mini DB9F-to-TB DB9 female to terminal block connector DIN-Rail Mounting Kits DK-25-01 DIN-rail mounting kit, 2 screws Wall-Mounting Kits WK-36-02 Wall-mounting kit, 2 plates, 6 screws, 36 x 67 x 2 mm Power Cords CBL-PJTB-10 Non-locking barrel plug to bare-wire cable © Moxa Inc. All rights reserved. Updated Apr 29, 2020. This document and any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Moxa Inc. Product specifications subject to change without notice. Visit our website for the most up-to-date product information.