40DN MSYSTEM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

MODEL: 40DN 40DN SPECIFICATIONS ES-9534 Rev.9 Page 1/5 https://www.m-system.co.jp/ Digital Panel Meters 40 Series LOOP POWERED DIGITAL PANEL METER (4 digits, process meter) Functions & Features

  • 4 digit (±9999) loop powered panel meter
  • No external power source needed
  • Scaling function
  • High visible, 0.8" (20.3 mm) high and bright LED mm (inch) 96 (3.78) (1.89) 96 (3.78) MODEL: 40DN[1]

ORDERING INFORMATION

  • Code number: 40DN[1] Specify a code from below for [1]. (e.g. 40DN/Q)
  • Specify the specification for option code /Q (e.g. /C01/SET) INPUT Current 4 – 20 mA DC [1] OPTIONS blank: none /Q: With options (specify the specification) SPECIFICATIONS OF OPTION: Q (multiple selections) COATING (For the detail, refer to M-System's web site.) Moving parts and indicators are not coated. /C01: Silicone coating /C02: Polyurethane coating /C03: Rubber coating EX-FACTORY SETTING /SET: Preset according to the Ordering Information Sheet (No. ESU-9534) GENERAL SPECIFICATIONS Construction: Panel flush mounting Connection: M3 screw terminals (torque 0.6 N·m) Solderless terminal: Refer to the drawing at the end of the section. Recommended manufacturer: Japan Solderless Terminal MFG.Co.Ltd, Nichifu Co.,ltd Applicable wire size: 0.25 to 1.65 mm2 (AWG 22 to 16) Screw terminal: Nickel-plated steel Housing material: Flame-resistant resin (gray) A/D conversion: Σ – Δ Sampling rate: 10 times/sec. (100 msec.) Averaging: None or moving average Setting: (Front button)
  • Scaled range
  • Moving average
  • Brightness ■Recommended solderless terminal 6 (.24) max 3.3 (.13) max mm (inch) DISPLAY Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment, red LED Display range: -9999 to 9999 Scaling range for measurement range (4 - 20 mA): -9999 to 9999 counts Decimal point position: 10-1, 10-2, 10-3 or none Zero indication: Higher-digit zeros are suppressed. Over-range indication: '-9999' or '9999' blinking for display values out of the display range. 'S.ERR' blinks surpassing the permissible range. Engineering unit indication: Sticker label attached DC, AC, mV, V, kV, μA, mA, A, kA, mW, W, kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ, cm, mm, m, m/sec, mm/min, cm/min, m/min, m/h, m/s2, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m3, m3/sec, m3/min, m3/h, Nm3/h, N·m, N/m2, g, kg, kg/h, N, kN, Pa, kPa, MPa, t, t/h, ℃, °F, %RH, J, kJ, MJ, rpm, sec, min, pH, %, ppm, etc. INPUT SPECIFICATIONS ■ DC Current Current range: Approx. 3.7 to 23 mA DC Voltage drop: Approx. 5 V with 4 mA; approx. 5.2 V with 20 mA (Equivalent input impedance: Approx. 260 Ω) (There is voltage drop generated by using the unit. For the two-wire transmitter power supply, make sure that the operable voltage for the two-wire transmitter is ensured including the voltage drop by other devices and wiring resistance.)

MODEL: 40DN 40DN SPECIFICATIONS ES-9534 Rev.9 Page 2/5 https://www.m-system.co.jp/ INSTALLATION Operating temperature: -10 to +55°C (14 to 131°F) Operating humidity: 30 to 90 %RH (non-condensing) Mounting: Panel flush mounting Weight: 160 g (0.35 lb) PERFORMANCE Accuracy: ±0.1 % rdg ±1 digit ("1 digit" is multiplied by scaling-multiple. Even in case the scaling-multiple is less than 1, multiply by 1.) Temp. coefficient: ±(0.01 % rdg +0.3 digits)/℃ ("0.3 digits" is multiplied by scaling-multiple. Even in case the scaling-multiple is less than 1, multiply by 1.) Scaling-multiple = | (Display Scaling Value B - Display Scaling Value A) ÷ (default Display Scaling Value B - default Display Scaling Value A) | STANDARDS & APPROVALS EU conformity: EMC Directive EMI EN 61000-6-4 EMS EN 61000-6-2 RoHS Directive EXTERNAL VIEW (2) Sticker Label (1) Front Panel (5) Disp/ Button (3) 4-digit Display (4) Polarity Indicator (6) Scale/ Button (8) Up Button (7) Shift Button ■COMPONENT IDENTIFICATION No. COMPONENT FUNCTIONS (1) Front panel Removed at configuration. (2) Sticker label Engineering unit label position (3) 4-digit display 4-digit LED display. Range: 0 to 9999 (not including decimal point) (4) Polarity indicator Turns on when negative value is displayed (5) Used to move on to the display setting modes; or to shift through setting items in each setting mode. (6) Used to move on to the scaling setting modes; or to shift through setting items in each set- ting mode. (7) Shift button Used to move on to the setting standby status and shift through display digits in each set- ting item. (8) Up button Used to select setting value. Disp/ button Scale/ button

MODEL: 40DN 40DN SPECIFICATIONS ES-9534 Rev.9 Page 3/5 https://www.m-system.co.jp/ PARAMETER LIST ■ SCALING SETTING MODE ... ... PARAMETER Display Scaling Value A Display Scaling Value B Decimal Point Position 3 positions or none Decimal point position FUNCTION DEFAULT VALUE DISPLAY Display value for 20 mA input Display value for 4 mA input To distinguish from B, the first decimal point is blinking. A 4mA (0%) 20mA (100%) 4mA (0%) 20mA (100%) B Display Input Display Scaling B A Display Input Display Scaling

  • Normal Scaling The display value increases when the input signal increases.
  • Inverted Scaling The display value decreases when the input signal increases. The decimal point position can be set to any digit. Set it according to the 100% value. ■ DISPLAY SETTING MODE PARAMETER Moving Average Brightness Initialization Non-initialization Brightness level 1 (dark) Moving average with 2 samples Brightness level 3 (bright) Brightness level 2 No moving averaging FUNCTION DEFAULT VALUE DISPLAY Initialize settings (change to factory settings) *1 Version Indication Version number, indication only – – Moving average with 4 samples Moving average with 8 samples *1 . While “ ” is shown, pressing Disp/ button or Scale/ button initializes settings. Activating “initialization” , user’s specified parameters will be deleted and overwritten with the factory default values. Notice that after this, Ex-factory settings will be irrecoverable.

MODEL: 40DN 40DN SPECIFICATIONS ES-9534 Rev.9 Page 4/5 https://www.m-system.co.jp/ EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch) 92 (3.62) 45 (1 .77) 85 (3.35)11 (.43) 96 (3.78) 96 (3.78) 48 (1 .89) 103 (4.06) 10–M3 SCREW TERMINALS ■ TOP VIEW ■ FRONT VIEW ■ SIDE VIEW ■ REAR VIEW 1 2 3 4 5 6 7 8 9 10 6.4 (.25) 12 (.47) 4 (.16) MOUNTING REQUIREMENTS unit: mm + 0.8 – 0 + 0.6 – 0 min. 120 min. 75 Panel thickness: 1.6 to 8.0 mm

MODEL: 40DN 40DN SPECIFICATIONS ES-9534 Rev.9 Page 5/5 https://www.m-system.co.jp/ SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM Controllor, etc. 4 – 20mA DC INPUT ■ 4-WIRE CONNECTION EXAMPLE – 2 INPUT Two-wire Transmitter Power Source Digital Computation A/D Converter Display / Setting I/P Positioner, etc. Specifications are subject to change without notice.