40DCPW GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 5 40DCPW_S4 – Rev. 2020-1.3 Specifications subject to change without notice. 40DCPW_S4 series 40Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated Ultra-wide input voltage range: 200 ~ 1500VDC Operating temperature: -40°C ~ 70°C 4000VAC isolation voltage High efficiency Low ripple & noise Short circuit protection (SCP) Input under voltage, over voltage, reverse voltage and over current protection High reliability, long life, 3 years warranty UL 1741/CSA-C22.2 No.107.1, EN62109 approval (pending) DIN-Rail package products Built-in high-voltage fuse RoHS and EMC filter module DC-DC Converter 40 Watt The 40DCPW_S4 Series is a 200-1500 VDC ultra wide input voltage regulated DC- DC converter, which has advantages such as high efficiency, high reliability and high safety isolation. The series products are widely used in industries such as photovoltaic power generation and high voltage frequency conversion, provide a stable operating voltage for the load device, Its multiple protection features can enhance the safety performance of the module power supply and the load under abnormal working conditions. Common specifications Short circuit protection: Continuous, automatic recovery Temperature rise at full load: 25°C MAX (Ta= 25°C, 100% load) Cooling: Free air convection Operation temperature range: -40°C~+70°C Storage temperature range: -40°C ~+85°C Case temperature: 90°C MAX Welding temperature: Wave-soldering: 260± 5°C; time:5~10s Manual-welding: 360± 10°C; time:3~5s Power derating: +50°C~+70°C: 10DCPW/15DCPW: 1.5%/°C MIN 40DCPW: 2.5%/°C MIN -40°C~0°C: 10DCPW/15DCPW: 0.75%/°C MIN 15DCPW_24S4/40DCPW: 1.5%/°C MIN Case Material Grade: Black flame-retardant and heat- resistant plastic (UL94-V0) Switching frequency: 65kHz Storage humidity range: < 95% Temperature coefficient: ±0.02%/°C MAX MTBF (MIL-HDBK-217F@25°C): >300,000 hours Weight: 10W/15W output:300g 40W output:410g Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Tested for 1 minute 4000 VAC Isolation resistance Test at 500VDC 100 MΩ Input specifications Item Test condition Min Typ Max Units Input voltage range 200 1500 VDC Input current 200VDC input

  • 10W/15W output
  • 40W output 800VDC input
  • 10W/15W output
  • 40W output 1500VDC input
  • 10W/15W output
  • 40W output 120 320 mA mA mA mA mA mA Inrush current • 200VDC
  • 800VDC
  • 1500VDC 150 A A A Under-voltage protection Under voltage protection range: 170~185V Under voltage release range:180~195V External input fuse 15A/1500VDC Hot plug Unavailable Example: 40DCPW_24S4 40 = 40Watt; DC = DIP Case; P = Photovoltaik; W = Wide input; 24 = 24Vout; S = Single output; 4 = 4kVAC isolation Output specifications Item Test condition Min Typ Max Units Output voltage accuracy ±2 % Line regulation Full load ±1 % Load regulation 0%-100% load ±1 % Ripple & Noise* 20MHz Bandwidth 150 300 mV Over current pro- tection 120%~320%Io, self-recovery Over voltage protection
  • 5V output voltage
  • 12V/15V output voltage
  • 24V output voltage
  • (Feedback-clamp) Voltage limited < 8V
  • (Feedback-clamp) Voltage limited < 20V
  • (Feedback-clamp) Voltage limited < 30V Min. load 0%-100% load 0 % Delay time** 200~1500VDC 2 s * Test ripple and noise by “parallel cable” method. Test efficiency at normal temperature and input voltage is 200VDC. ** Delay Time test condition: Full input voltage range, full output load range (The cooling time between Input power-off and the next input Power-on is bigger than 15s).

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 5 40DCPW_S4 – Rev. 2020-1.3 Specifications subject to change without notice. EMC specifications EMI CE CISPR22/EN55022 CLASS A (refer to EMC recommended circuit) EMI RE CISPR22/EN55022 CLASS A (refer to EMC recommended circuit) EMS ESD IEC/EN61000-4-2 Contact ±6KV/Air ±8KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV perf. Criteria B (refer to recommended circuit) EMS Surge IEC/EN61000-4-5 line to line ±1KV perf. Criteria B (refer to recommended circuit) EMS CS IEC/EN61000-4-6 10 Vr.m.s perf. Criteria A EMS PFM IEC/EN61000-4-8 10A/m perf. Criteria A Typical characteristics Note: 1. For the 40DCPWxxS4,input voltage should be derated based on temperature derating when it is 1200~1500VDC; 2. For the 10-40DCPW, altitude should be derated based on temperature derating when it is 2000~5000m; 3. This product is suitable for use in natural air cooling environments, if in a closed environment, please contact our company’s FAE. 10DCPW/15DCPW 10DCPW/15DCPW 15DCPW_24S4 40DCPW 40DCPW 10DCPW/15DCPW 40DCPW Product Selection Guide Part Number Power [W] Nominal Output [V; Vo] Current Output [mA; lo] Capacitive load [µF, Max.] Ripple & Noise [mV, typ.] Efficiency [%, max] 40DCPW_12S4 40 12 3330 3000 150 76 40DCPW_15S4 40 15 2670 1500 150 78 40DCPW_24S4 40 24 1670 680 150 80 Note: *Part No. with suffix of “DR” means: DIN-Rail mounting (e.g.: 40DCPW_24S4DR means DIN-Rail mounting). 40DCPW_S4 series 40Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 5 40DCPW_S4 – Rev. 2020-1.3 Specifications subject to change without notice. Note: Output filtering capacitor C2 is an electrolytic capacitor, it is recommended to apply electrolytic capacitor with high frequency and low resistance. For capacitance and current of capacitor please refer to manufacture’s datasheet. Capacitance withstand voltage derating should be 80% or above. C1 is a eramic capacitor, which is used to filter high-frequency noise. TVS is a recommended component to protect post-circuits if converter fails. Typical application circuit EMC application circuit with higher requirements (The output circuit parameters show in typical application EMC solution-recommended circuit Element model Recommend value C7, C8, C9, C10 104K/275VAC C1, C2, C3, C4 47μF/450V R1, R2, R3, R4 1MΩ/2W LDM 330uH/1A LCM 7mH/1A FUSE 3.15A, slow fusing, necessary 40DCPW_S4 series 40Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated Model C1 (μF) C2 (μF) TVS 10DCPW_05S4 1 120 SMBJ7.0A 15DCPW_12S4 1 120 SMBJ20A 15DCPW_15S4 1 120 SMBJ20A 15DCPW_24S4 1 68 SMBJ30A 40DCPW_12S4 1 120 SMBJ20A 40DCPW_15S4 1 120 SMBJ20A 40DCPW_24S4 1 68 SMBJ30A

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 5 40DCPW_S4 – Rev. 2020-1.3 Specifications subject to change without notice. 40DCPW_S4 series 40Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated Mechanical dimensions and recommended layout

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 5 of 5 40DCPW_S4 – Rev. 2020-1.3 Specifications subject to change without notice. 40DCPW_S4 series 40Watt - Single Output DC-DC Converter - Ultra Wide Input Range - High Isolated & Regulated DIN rail mounting Note: 1. Unless otherwise specified, all specifications above are measured at rated input voltage and rated output load, TA = 25°C, humidity < 75%; 2. All specifications stated in this datasheet are subject to the above listed models only. For specifications of non-standard models, please contact our technical support team. 3. Prohibit the use of the washer as water easily corrosive substances cleaning products shell, In order to avoid damage product shell; 4. In order to improve the conversion efficiency, when the module is working under high pressure, the module may have certain audio noise, but does not affect the reliability of the product; 5. The performance indexes of the product models listed in this manual are as above, but some indexes of non- standard model products will exceed the abovementioned requirements, and please directly contact our technician for specific information; 6. We can provide product customization service; 7. Specifications of this product are subject to changes without prior notice.