400 MORSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

The Specialist In Drum Handling Equipment Hydra-Lift Karriers Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet F400 (Updated 11 Aug, 2023) 1 MADE IN USA service@morsedrum.com 103 Kuhn Rd. Syracuse, NY, 13208 USA morsedrum.com (315) 437-8475 Manual Tilt Controls (Power Options pg 2) Model 400A-60 has hand crank tilt control. Models 400A-72 and 400A-96 have pull chain and chain wheel tilt control. Drum Handling System

  • Automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum
  • Accepts Diameter Adapters for smaller drums
  • Install Top Rim Clamp or Bracket Assembly to handle a plastic drum
  • Flexible cinch chain cover helps protect drum sidewall
  • Alloy cinch chain and hinge
  • Durable stress relief weld joints Manual Tilt Control Options We recommend Factory Installed Option # 3900i-P MORStop Tilt-Brake to automatically hold drum tilt angle. > > Click to Watch Video < < Lift and Dispense a Drum
  • Control Lifting Height and Pouring Angle
  • Removes Effort and Increases Productivity
  • Power Lift and Tilt Options
  • 360o Tilt Control in Either Direction
  • Models with Spark Resistant Parts
  • Capacity: 800 Lb. (363 kg) full drum (500 Lb. (227 kg) half-full* drum) Easily handle a heavy drum. Lift, move and control pouring of a 55-gallon (210 liter) drum weighing up to 800 Lb. (363 kg) with minimal effort. Handle a variety of drums by installing correct accessories for your drum(s). Models with maximum pouring heights of 72” or 96” (183 or 244 cm). Raise and control dispensing. Increase pouring angle for full discharge, reduce to control pour rate, or reverse to stop pouring and deliver partial drum contents. Material is poured forward straight from drum with variable lift and pour angles. Works with faucet, pipe, valve extension, etc. attached to drum.
  • Lift drums on and off scales, platforms, conveyors or trucks
  • Move drums to and from storage
  • Position drum of parts for access at work stations * Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum. Model 400A-96-110 with 96” dispensing height and electric power lift and tilt. Model 400A-72 Model 400A-60 Hydraulic Hand Pump Hand Crank Dimensions Model # Maximum Dispensing Height Tilt Control R H L O.D. I.D. Turning Radius Domestic Ship Weight 400A-60 72” 183 cm Hand Crank 15 cm 55” 140 cm 60” 152 cm 44.3” 112.5 cm 37” 94 cm 6’ 308 Lb. 140 kg 400A-72 72” 183 cm Chain Wheel 15 cm 55” 140 cm 60” 152 cm 44.3” 112.5 cm 37” 94 cm 6’ 311 Lb. 141 kg 400A-96 96” 244 cm Chain Wheel -3” -7.6 cm 69” 175 cm 72.5” 184 cm 49” 124 cm 42” 107 cm 7’ 379 Lb. 172 kg Each Hydra-Lift Karrier Features Heavy-duty hydraulic ram has built-in flow control for uniform, controlled speed of descent with even the heaviest drum. Heavy-duty hydraulic lift cylinders include velocity fuse to provide full line shut-off in case of line failure. Welded rectangular steel tube framework. Maneuver on two 8” (20.3 cm) durable polyolefin wheels and two 4” (10.2 cm) swivel casters. Has screw down floor lock. Manual-LIFT models have hydraulic hand pump with variable release valve for drum lift. Manual-TILT models have 30:1 reduction simple and easy drum pouring. Reach Beyond Front Wheels with a 55-Gallon Steel Drum Model # Dispensing Height Reach with Horizontal Drum Reach with Drum Pouring at 45 Degrees 400A-60 or 400A-72 400A-96 48” (121.9 cm) 13” (33 cm) 0 Option X02-400-72 or X03-400-96 9” (22.9 cm) Hand Crank Option X03-400-72 or X03-400-96 16” (40.6 cm) Hand Wheel

The Specialist In Drum Handling Equipment Hydra-Lift Karriers morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet F400 (Updated 11 Aug, 2023) 2 MADE IN USA MORCINCHTM drum holder automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum. Use cinch chain with pawl and ratchet mechanism to secure drum in holder. To safely handle other drums, you MUST install one of the following: Bracket Assembly provides a brace at top and bottom of drum to prevent it from slipping length-ways. It is REQUIRED to handle a RIMLESS plastic drum, and recommended to more securely handle a fiber drum. Adjust for 31” to 39” (79 to 99 cm) tall drum. Kit # 4556-P Bracket Assembly Kit # 4556M-P Spark Resistant Bracket Assembly Top Rim Clamp grips upper drum rim to prevent it from slipping length-ways. Handle 30-gallon to 55-gallon (114 to 210 liter) size RIMMED plastic or fiber drum. Kit # 4560B-P Rim Clamp Assembly Kit # 4560BM-P Spark Resistant Rim Clamp Assembly. DIAMETER ADAPTERS DIAMETER AdapterS SPARK RESISTANT DIAMETER AdapterS STAINLESS STEEL DIAMETER AdapterS FITS DIAMETER DOMESTIC SHIP WEIGHT 55/30-19 55/30M-19 55/30SS-19 18.5” to 19” (47 to 48.3 cm) 24 Lb. (11 kg) 55/30-16 55/30M-16 55/30SS-16 15.5” to 16” 39.4 to 40.6 cm) 35 Lb. (16 kg) MORCINCH TM Kits Power Lift Models To order complete model with power options, use power option number below as suffix on manual model number. See complete models on page 3. Power-Tilt must be ordered on NEW model from the factory. All powered models are shipped fully assembled. Power-Lift Models ease drum lifting, but retain manual tilt control. Hand crank tilt control is on 60” lift height units. Models with 72” and 96" lift heights have pull chain and chain wheel tilt control. Power Suffix Motor Type Motor Control Ship Weight Adder -120 AC, 1HP/115V, TEFC Switch, Cord, Plug 40 Lb. (18.1 kg) -124 Air, Vane Type On/Off Valve 25 Lb. (11.4 kg) -125 DC, 12V Built-in 85 Lb. (38.6 kg) Electric Power Lift Use switch to raise drum. Lower drum with manual release valve. Air Motor Power Lift Use on/off valve to raise the drum. Lower drum with manual release valve. Air motor Requirements: 40 to 60 PSI at 40 SCFM. Battery Power Lift Self contained battery power- lift. Operate battery power controls to raise and lower drum. Separate charger is included. Power Lift and Tilt Models Power Lift and Tilt Models make drum handling easier and faster. There are two hand valve controls: One for power- lift function and a second for power-tilt. Existing manual lift models can be converted to power lift. Order Power-Lift Kit for “Field installation,” such as O-120FI, O-124FI, or O-125FI. Option # G-400 Optional 3-Piece Drum Holder is for handling ONLY 22.5” (57.2 cm) diameter 55-gallon (210 liter) steel drum. Surrounds drum with metal band, hinged on each side. Optional 3-Piece Drum Holder Power Suffix Motor Type Motor Control Ship Weight Adder -110 AC, 1HP/115V, TEFC Switch, Cord, Plug 75 Lb. (34 kg) -114 Air, Vane Type On/Off Valve 95 Lb. (43 kg) -115 DC, 12V Built-in 120 Lb. (54.4 kg) Electric Power Lift & Tilt Hold momentary switch and lift valve to raise drum. Use 2nd valve to control hydraulically driven drum tilt. Lower drum with manual release valve. Air Power Lift and Tilt Hold on/off valve and lift valve to raise drum. Use 2nd valve to control hydraulically driven drum tilt. Lower drum with manual release valve. Air motor Requirements: 40 to 60 PSI at 40 SCFM. Battery Power Lift and Tilt Hold momentary switch and lift valve to raise drum. Use 2nd valve to control drum tilt. Lower drum with manual release valve. Battery charger is included. Web Strap with Ratchet Option # 5115i-P Web Strap and Ratchet (not for use on spark resistant models) NOTE: 12V Deep Cycle Lead Acid Battery is designed for domestic shipment only. For export shipment, choose the following battery option:

  • Option “NB” No Battery. Customer must obtain battery before use... Exide # 27MDP 12V Deep Cycle Battery or equivalent. Kit 4560B-P Insert correct size Diameter Adapter for smaller durm. Simply insert adapter into standard drum holder without tools. Adapters for 17.5” (44.5 cm) diameter or smaller have integrated brackets at top and bottom of drum. Adjust for up to 38” (96.5 cm) tall drum. Spark resistant and stainless steel Adapters also available.

The Specialist In Drum Handling Equipment Hydra-Lift Karriers morsedrum.com Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet F400 (Updated 11 Aug, 2023) 3 MADE IN USA Model 400A-72-120 Hydra-Lift Karrier with 72” lift height, electric powered drum lift, and manual pull chain drum tilt control Model 400A-72-124 Hydra-Lift Karrier with 72” lift height, air powered drum lift, and manual pull chain drum tilt control Model 400A-72-125 Hydra-Lift Karrier with 72” lift height, battery powered drum lift, and manual pull chain drum tilt control Model 400A-96-110 Hydra-Lift Karrier with 96” lift height, electric powered drum lift and tilt control Model 400A-72-114 Hydra-Lift Karrier with 72” lift height, air powered drum lift and tilt control Model 400A-72-115 Hydra-Lift Karrier with 72” lift height, battery powered drum lift and tilt control