500

500 MORSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 3

Technical content

The Specialist In Drum Handling Equipment Vertical-Lift Drum Pourers Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet 500 (Updated 11 Aug, 2023) 1 MADE IN USA service@morsedrum.com 103 Kuhn Rd. Syracuse, NY, 13208 USA morsedrum.com (315) 437-8475 Two Types of Scales The digital indicator keeps you informed of the drum weight, so you can weigh while pouring. Scales are simple to use and to read enabling accurate batching by weight. The touch pads include numbers for tare entry. Four load cells accurately sense weight regardless of the tilt angle of the drum. Battery saving “sleep” mode turns indicator off when scale is not in use. Display weight to 0.1 Lb. (or set to diplay metric units). Accuracy of +/-0.2 %. Scale has NO data storage capability. Maximum operating temperature is 104o F (40o C). Scale components will be installed and calibrated before leaving the Morse factory. However, the rigors of transportation may change scale calibration. To assure proper accuracy, the user should employ local scale service personnel to check the function and calibration of the scale. Cost of on-site calibration is not included in the selling price. T-Type Scale - Intrinsically safe, ultra low power intensity (ULPI) scale indicator for use in many hazardous areas, approved for all classes, groups and divisions of N.E.C. hazardous environment classifications. The hand pumped or air powered drum handler with this intrinsically safe weighing system may be used in many hazard areas where ordinary electric powered equipment would be prohibited. Comes with battery pack and 115V 60Hz charger. For 220V/50Hz applications, battery charger will require a step down transformer - order part number 93740-P. Models with spark resistant monel parts, such as drum holder bands are indicated by an “M” in the model number. N-Type Scale - Economical general purpose instrument for use in a variety of weighing applications. NOT for use in hazardous areas. Powered by five ordinary alkaline D-cell batteries. > > Watch Video < < Lift and Control Dispensing of Your Drum * Half-full rating is based on tilt mechanism’s capacity for handling a bottom heavy drum. A partially full drum with unbalanced and shifting load is harder to tilt than a full drum. “T” Type Intrinsically safe scale indicator for use in hazardous areas. “N” Type scale indicator NOT for hazardous environments. Scale-Equipped Models - Weigh As You Pour! Model 515-T-114 shown is equipped with an intrinsically safe scale and air powered lift and tilt. Drum Handling System Model 520-115 shown has DC powered lift and tilt to pour a drum up to 106” (2.7 m) high.

• Lift, move and control dispensing of your drum up to 106” (269 cm) high
• You control the lifting height and pouring angle
• Power Lift and Tilt Options
• Available built-in weighing capability to weigh as you pour!
• 360o Tilt Control in either direction
• Models available with spark resistant parts
• Capacity: 800 Lb. (363 kg) full drum 500 Lb. (227 kg) half-full* drum Lift, tilt and drain drum contents with ease. Hydraulic lift and tilt makes it simple to raise and tilt a heavy drum. Vertical lifting track keeps drum reach constant through the full lift range. Heavy duty hydraulic lift cylinders include a velocity fuse to provide a full line shut-off in the event of a line failure. Dispense into a vat, hopper, mixer or other container up to 106” (269 cm) high. Manual lift and tilt also available. With Scale-Equipped Series, know the weight of what you have poured!
• Automatically adjusts for 22” to 23.5” (56 to 59.7 cm) diameter drum
• Accepts Diameter Adaptors for your smaller drum
• Bolt-On Bracket Assembly to handle a plastic drum, recommended to more securely handle a fiber drum
• Bolt-on Top Rim Clamp for 55-gallon (210 liter) plastic drum or fiber drum
• Includes a flexible cover on the cinch chain to help protect the sidewall of your drum
• Incorporates alloy cinch chain and durable stress relief weld joints

The Specialist In Drum Handling Equipment Vertical-Lift Drum Pourers Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet 500 (Updated 11 Aug, 2023) 2 MADE IN USA DIAMETER ADAPTORS DIAMETER ADAPTORS SPARK RESISTANT FITS DIAMETER 55/30-19 55/30M-19 18.5” to 19” (47 to 48.3 cm) 55/30-16 55/30M-16 15.5” to 16” 39.4 to 40.6 cm) The MORCINCH TM drum holder on Hydra-Lift Karriers is designed to handle a 55-gallon (210 liter) steel or fiber drum. It automatically adjusts from 22” to 23.5” (56 to 59.7 cm) in diameter. The cinch chain with pawl and ratchet mechanism is used to secure the drum in the holder. To handle other drums, order one of the following: Install Top Rim Clamp Kit 4560B-P to safely handle a RIMMED 30-gallon to 55-gallon (114 to 210 liter) size plastic drum. Grips upper drum rim to prevent slipping length-ways. Kit # 4560B-P Rim Clamp Assembly Kit # 4560BM-P Spark Resistant Rim Clamp Assembly The Bracket Assembly provides a brace at top and bottom of your drum to prevent it from slipping lengthways through the drum holder. The Bracket Assembly is required to handle a rimless plastic drum, and recommended to more securely handle a fiber drum. It adjusts for 31” to 39” (79 to 99 cm) tall drum. Part # 4556-P Bracket Assembly Part # 4556M-P Spark Resistant Bracket Assembly For a smaller diameter drum, Diameter Adaptors install easily without tools and are quickly removed. Diameter Adaptors for 17.5” (44.5 cm) diameter or smaller have brackets at top and bottom of the drum. They adjust for a drum up to 38” (96.5 cm) tall. Spark resistant and stainless steel Diameter Adaptors are also available. Model 55/30-17.5 MORCINCHTM OptionsTo order complete units with any of the power options below, use the power option number as a suffix on manual model number. Example: Model 520-115 has battery powered lift and tilt up to 106” (269 cm) high. Power-Tilt Options must be ordered on new units from the factory. All units with power options factory installed are shipped fully assembled. 3-Piece Drum Holder Option # G-400 The optional 3-Piece Drum Holder is for handling only a 22.5” (57.2 cm) diameter 55-gallon (210 liter) steel drum. It surrounds your drum with a hinged metal band. Power Lift and Tilt Models Power Lift and Tilt Models make drum handling easier and faster. There are two hand valve controls: One for the power-lift function and a second for power-tilt. Power Suffix Motor Type Motor Control Ship Weight Adder -110 AC, 1HP/115V, TEFC Switch, Cord, Plug 75 Lb. (34 kg) -114 Air, Vane Type On/Off Valve 95 Lb. (43 kg) -115 DC, 12V Built-in 120 Lb. (54.4 kg) Electric Power Lift & Tilt Hold momentary switch and lift valve to raise drum. Use second valve to control the hydraulically driven drum tilt. Lower the drum with manual release valve. Air Power Lift and Tilt Hold on/off valve and lift valve to raise the drum. Use a second valve to control the hydraulically driven drum tilt. Lower the drum with manual release valve. Air motor requirements: 40 to 60 PSI at 40 SCFM. Battery Power Lift and Tilt Hold momentary switch and lift valve to raise drum. Use 2nd valve to control drum tilt. Lower drum with manual release valve. Charger is included. Bracket Assembly NOTE: 12V Deep Cycle Lead Acid Battery is designed for domestic shipment only. For export shipment, choose the following battery option:

• Option “NB” No Battery. Customer must obtain battery before use... Exide # 27MDP 12V Deep Cycle Battery or equivalent. Kit 4560B-P We recommend the MORStop Tilt-BrakeTM on models with manual tilt. It automatically holds the drum tilt angle and prevents uncontrolled turning, even when drum contents shift. Option # 3900i-P MORStop Tilt-BrakeTM factory installed. Web Strap with Ratchet Option # 5115i-P MORCINCHTM Drum Holder with Web Strap and Ratchet option installed (not for use on spark resistant models). Power Lift Models with Manual Tilt Power-Lift Models ease drum lifting, but retain manual tilt control. Hand crank tilt control is on 60” (152 cm) lift height units. Models with 106" (269 cm) lift heights have pull chain and chain wheel tilt control. Power Suffix Motor Type Motor Control Ship Weight Adder -120 AC, 1HP/115V, TEFC Switch, Cord, Plug 40 Lb. (18.1 kg) -124 Air, Vane Type On/Off Valve 25 Lb. (11.4 kg) -125 DC, 12V Built-in 85 Lb. (38.6 kg) Electric Power Lift Use switch to raise the drum. Lower the drum with manual release valve. Air Motor Power Lift Use on/off valve to raise the drum. Lower the drum with manual release valve. Air motor Requirements: 40 to 60 PSI at 40 SCFM. Battery Power Lift Self contained battery power- lift. Operate battery power controls to raise and lower drum Separate charger is included. Existing manual lift models can be converted to power lift. Order Power-Lift Kit for “Field installation,” such as O-120FILC-500, O-124FILC-500, or O-125FILC-500.

The Specialist In Drum Handling Equipment Vertical-Lift Drum Pourers Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet 500 (Updated 11 Aug, 2023) 3 MADE IN USA AC Motor * Power Hydraulic Lift & Tilt Air Motor † Power Hydraulic Lift & Tilt 12V DC ** Power Hydraulic Lift & Tilt AC Motor * Power Hydraulic Lift, Manual Tilt * Air Motor † Power Hydraulic Lift, Manual Tilt * 12V DC Power Hydraulic Lift, Manual Tilt * Manual Hydraulic Lift, Manual Tilt *** Scale Equipped Single-Stage with 60” (1.5 m) Lift 515-N-110 515-T-114 515-N-114 515M-T-114 515-N-115 515-N-120 515-T-124 515-N-124 515M-T-124 515-N-125 515-T 515M-T 515-N Two-Stage with 106” (2.7 m) Lift 525-N-110 525-T-114 525-N-114 525M-T-114 525-N-115 525-N-120 525-T-124 525-N-124 525M-T-124 525-N-125 525-T 525M-T 525-N Non Scale Equipped Single-Stage with 60” (1.5 m) Lift 510-110 510-114 510M-114 510-115 510-120 510-124 510M-124 510-125 510 510M Two-Stage with 106” (2.7 m) Lift 520-110 520-114 520M-114 520-115 520-120 520-124 520M-124 520-125 520 520M 510 and 515 Series Single-Stage Drum Pourers

• Dispense at up to 60” (152 cm) high
• Retract to a minimum of height of 78” (198 cm)
• Turning Radius: 61” (155 cm)
• Lowest position of bottom edge of 8” (20.3 cm) wide drum holder
• 510 Series: 9.5” (24.13 cm) above floor
• 515 Series: 12.5” (31.75 cm) above floor 130” (330 cm) 78” (198 cm) FLOOR LOCK 6” (15.2 cm) CASTER 8” (20.3 cm) WHEEL 43.75” (111 cm) 38.5” (97.8 cm) (15.2 cm) 57.5” (146 cm) 40.25” O.D. (102.2 cm) 32.625” I.D. (82.9 cm) 106” (269 cm) Side View Front View 78” (198 cm) 60” (152 cm) 43.75” (111 cm) 12” (30.5 cm) 50.5” (128 cm) 6” (15.2 cm) CASTER FLOOR LOCK 8” (20.3 cm) WHEEL 38.5” (97.8 cm) 35.75” O.D. (90.8 cm) 28” I.D. (71.1 cm) Side View Front View “T” in Model # = Intrinsically safe scale indicator “N” in Model # = NOT for hazardous areas “M” in Model # = Model with spark resistant parts such as drum holder bands made of monel * Standard motors are TEFC, 1HP for 115V AC, 60 Hz 12V DC power option includes battery and 110V AC charger * Manual tilt control for 510 and 515 Series is hand crank. Manual tilt control for 520 and 525 Series is chainwheel and pull-chain. † Air motor requirements: 40 to 60 PSI at 40 SCFM. Model Numbers 520 and 525 Series Two-Stage Drum Pourers
• Dispense at up to 106” (269 cm) high
• Retract to a minimum height of 78” (198 cm)
• Turning Radius: 68.25” (174 cm)
• Lowest position of bottom edge of 8” (20.3 cm) wide drum holder
• 520 Series: 9.5” (24.13 cm) above floor
• 525 Series: 12.5” (31.75 cm) above floor
• Highest point of frame at a given dispensing height:
• D = Dispensing height with drum horizontal
• Highest Point = 78” (198 cm) + (D x 0.5)