3J0005-200N GRAYHILL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

  • Three Configurations - Optical Rotary Encoder - Encoder with Pushbutton - Joysticking Encoder with Pushbutton
  • J1939 and CANopen versions
  • Dimmable LED indicators and legends
  • Sealed to IP67
  • Vibration and impact resistant
  • Operating Temp: -40oC to +85oC
  • Long Life: 500,000 cycles
  • Support for multiple key combinations
  • Designed for 12/24 volt systems
  • Custom legends and configurations DIMENSIONS in inches (and millimeters) www.grayhill.com Put display functions within reach - 5 hot keys for rapid navigation - Scroll with rotary encoder - Select with pushbutton - Navigate with joystick Rotary Encoder version with Target Legends Joysticking Encoder version Your Experts in Cab Controls Grayhill specializes in the design, development and production of human interface controls, including: - Cab user interface design - Customized control panels - CAN-bus interface devices Esc Blank keys shown below ISO Symbols shown below Recommended Panel Cut-out

Contact Grayhill or your local Grayhill sales representative for more information. ENVIRONMENTAL SPECIFICATIONS Operating temperature ANSI/ASAE EP455 5.1.1 Level 2 -40°C for 4 hours to +85°C for 11 hours Storage Temperature ANSI/ASAE EP455 5.1.2 Level 2 -40°C 4 hours to +85°C 4 hours Thermal Shock ANSI/ASAE EP455 5.1.3 -40°C to 70°C at a rate of 4°C/ min (1 hour at extremes) Altitude (Barometric Pressure) ANSI/ASAE EP455 5.2 101.3kPa to 18.6kPa Sand and Dust ANSI/ASAE EP455 5.3 24 hours with 0.88g/m3 Solar Radiation ANSI/ASAE EP455 5.4 43 to 75W/m2 UV Radiation (280 to 400nm wavelength) for 300h Wash Down ANSI/ASAE EP455 5.6 Level 2 375 kPa and 8.3 L/min for 10 minutes @15°C Water temp Ingress Protection IP67 1 meter submersion for 30 minutes Humidity ANSI/ASAE EP455 5.13 96% Humidity at 35°C for 240 hours. Salt Fog ANSI/ASAE EP455 5.9 5% aqueous solution of NaCl @ 35°C and a pH between 6.5 and 7.2 for 48 hours Chemical resistance (Resis- tance to Solvents) ISO 16750-5 EP 455 (5.8.2) Thermal Cycling (Change of Temperature) ISO 16750-4 -40° to 85°C 2 hours at extremes change rate = 1°C/ min (8 hours) repeat for 30 cycles. MECHANICAL PERFORMANCE Vibration, Random ANSI/ASAE EP455 5.15.1 2 hours each axis @ 52.4 m/s2 RMS overall acceleration and spectral power density of 2m2/s3 from 50Hz to 2000Hz Vibration, Sinusoidal ANSI/ASAE EP455 5.15.2 A logarithmic sweep from 10Hz to 2000Hz to 10Hz over a period of 20 minutes for 4 hours in each of 3 orthogonal axes with amplitude of 1.5mm from 10Hz to 40Hz and a constant acceleration of 35m/s2 RMS from 40Hz to 2000Hz. Shock / Crash Safety ANSI/ASAE EP455 5.14 A single 11ms half sine pulse of 490 m/s2 in 3 perpendicular axes. Drop ANSI/ASAE EP455 5.14.2 Level 1 Drop component 400 mm onto a hardwood benchtop on all practical edges. Shipping integrity International Safe Transit Agency procedure 3A ELECTROMAGNETIC COMPATIBILITY SPECIFICATIONS ESD ANSI/ASAE EP455 5.12 +/- 25kV for 10 pulses, 5 of each polarity Radiated Immunity ISO14982 6.6 10MHz-1000MHz Range 48mA Bulk Current Injection 100V/m Conducted Emissions SAE J1113-41 Class 3 Broadband Radiated Emissions ISO14982 6.4 64dB to 54dB, 30MHz-75MHz (linearly decreases) 54dB to 65dB, 75MHz-400MHz (linearly increases) 65dB, 400MHz- 1000MHz ELECTRICAL PERFORMANCE SPECIFICATIONS Maximum load ANSI/ASAE EP455 5.1.1 Level 2 -40°C 4 hours +85°C for 11 hours max load applied Jump start forward voltage ISO 16750-2 36V for 60 minutes Jump start reverse voltage ISO 16750-2 -36V for 60 minutes Short circuit protection ISO 16750-2 All outputs to ground for 60s Reverse polarity protection ISO 16750-2 28V for 60s Starting profile ISO 16750-2 Class A Battery-less operation ANSI/ASAE EP455 5.11.3 Level 2 Apply 6+12.6sin(2*pi*f*t) f is swept from 500Hz to 1.5kHz 5min Load dump ISO 7637-2 Test Pulse 5b Class A Switching spikes – negative ISO 7637-2 Test Pulse 3a Class A Switching spikes – positive ISO 7637-2 Test Pulse 3b Class A Wire harness inductance ISO 7637-2 Test Pulse 2a and 2b Class A +/- inductive load pulse ANSI/ASAE EP455 5.11.4 14-300e^(-t/.001)V 1Hz for 300 cycles +/- mutual coupling ANSI/ASAE EP455 5.11.6 Level 2 14+200e^(-t/14x10^-6)V 1Hz for 300 cycles Alternator field decay ANSI/ASAE EP455 5.11.2 Class A CE COMPLIANCE Agriculture and Forestry Machinery EMC ISO 14982 ESA Construction Machinery EMC EN 13309:2000 ESA Bulletin 1124 Rev 04/12 Pin 1 2 3 4 Signal Power Gnd CAN_H CAN_L CONNECTION 4 pin Deutsch DT Connector. Power with 8V to 32V vehicle type inputs.

ORDERING INFORMATION

www.grayhill.com Grayhill, Inc.

561 Hillgrove Avenue phone: (708) 354-1040

LaGrange, Illinois 60525 fax: (708) 354-2820 3JXXX5-200N Series Code Keypad Symbols 0 = Blank 1 = ISO Symbols (as shown in dimensional drawing) 2 = Targets Input Type 0 = Encoder 1 = Joystick Encoder Protocol Blank = J1939 N = CANopen Custom Designation 200 = Default Center Pushbutton 0 = No pushbutton 1 = Pushbutton (joystick always has pushbutton) Configuration 5 = Default MOUNTING INFO Use M6 Nut (1mm pitch) Max Torque 25 in-lbs