35ACP GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 3 35ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 35ACP_S Series 35W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated High efficiency up to 88% Universal AC input range (90~264VAC) Withstand 300VA surge input for 5 sec. Over voltage protection (OVP) Over load protection (OLP) Short circuit protection (SCP) Wide operating ambient temperature (-20°C~70°C) Operating altitude up to 5000M 100% full load burn-in test Easy assembling from top side PCB soldering side with conformal coating AC-DC Converter 35 Watt The 35ACP_S series features standard rail mounting, energy efficiency and is highly cost-effective. The series offers stability and high noise immunity especially for industrial control equipment, machinery and other demanding environments for industri al equipment. This conver - ter offers a compact and light weight design with and standard rail ins- tallation (35mm). Furthermore this series offers Easy Fuse Tripping due and a built-in DC OK relay contact. The converter can be installed on TS-35/7.5 or TS-35/15. Example: 35ACP_24S 35 = 35Watt AC = AC-DC P = series 24 = 24 Vout S = single output Input specifications Input voltage range 90~264VAC, 127~370VDC Input frequency 47~63Hz AC current 230VAC 1A (max) Inrush current Cold start, 230VAC 50A (typ) Leakage current Input—output: <0.25mA Input—PG: <3.5mA Output specifications Item Test conditions Min Typ Max Units Output voltage accuracy Full load ±3 % Voltage adjustment range ±5 ±10 % Line regulation Vin= min. to max. at full load ±0.5 % Load regulation 0% to 100% load ±1 % Set-up time @230VAC input, full load 1 s Hold-up time (full load)

  • @230VAC input
  • @120VAC input ms ms Overshoot and undershoot 5 % Switching fre- quency

100 KHz

  • Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor. Protection specifications Over-load protection 105%~150% of rated output current, constant power, auto recovery Over-voltage protection 105%~150% of rated output voltage, constant voltage Common specifications Short circut protection: Long-term mode, automatic recovery Temperature rise at full load: 40°C MAX Cooling: Free air convection Operation temperature range: -25°C~+70°C Storage temperature range: -40°C ~+85°C Storage humidity range: < 95% Temperature coefficient: 0.03%/°C MAX MTBF (using MIL-HDBK-217F): +25°C >200,000 hours Power boost: 150% of rated current Parallel function: support Safety standards: UL60950-1 2nd Ed; IEC 60950-1:2005(2nd Ed); EN60950-1:2006 Case material: Heat-resistant Plastic (UL94-V0) and metal Dimensions (L*W*H): 101.6×63.5×33mm Weight: 253g Isolation specifications Item Test condition Min Typ Max Units Withstand voltage* • Primary-Sec.: 10mA
  • Primary-PG: 10mA
  • Secondary-PG: 10mA 3000 1500 500 VAC Isolation resistance 100 MΩ * Input-Output, tested for 1 minute, 500VDC and leakage current less than 1mA Note: 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 3 35ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 35W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 35ACP_S Series Mechanical dimensions EMC specifications EMC / Emission Compliance to EN55022, EN55024, Class B EMC / Harmonic current Compliance to EN61000-3-2, -3 EMC / Immunity Compliance to EN61000-4-2, -3, -4, -5, -6, -8, -11; EN55024, EN61000-6-2 heavy industry level The SPS is considered as a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. Approval Model Power [W] Output [Vo, VDC] Rated Current [A] Current Range [A] Ripple&Noise* [mV, typ] 0~70°C -25~0°C Efficiency [%, typ] 230VAC 115VAC UL 35ACP_05S 35 5 6 0~6 50 80 80 79 UL 35ACP_12S 35 12 3 0~3 80 180 84 83 UL 35ACP_15S 35 15 2.4 0~2.4 120 200 86 85 UL 35ACP_24S 35 24 1.5 0~1.5 120 200 87 86 UL 35ACP_48S 35 48 0.76 0~0.76 180 240 88 87 Measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1 uF & 10uF parallel capacitor.

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 3 35ACP_S – Rev. 2020-1.2 Specifications subject to change without notice. 35W - Single Output AC-DC Converter - Universal Input - Isolated & Regulated 35ACP_S Series Typical characteristics Functional block diagram Derating Curve AMBIENT TEMPERATURE (°C) LOAD (%) Functional diagram