352-505-04 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC DC INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA lp Topr Tstg 352-505-04 Red Colour Diffused 2.0* 20 60 627 -40 ~ +85^ -40 ~ +85 Yes 352-511-04 Yellow Colour Diffused 2.1* 20 40 590 -40 ~ +85^ -40 ~ +85 Yes 352-514-04 Green Colour Diffused 2.2* 20 40 565 -40 ~ +85^ -40 ~ +85 Yes 352-535-04 Red/Green Colour Diffused 2.0/2.2* 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 352-581-20 Red Colour Diffused 5 13 50@13mA 627 -40 ~ +70^ -40 ~ +85 Yes 352-582-20 Yellow Colour Diffused 5 13 20@13mA 590 -40 ~ +70^ -40 ~ +85 Yes 352-583-20 Green Colour Diffused 5 11.5 20@11.5mA 565 -40 ~ +70^ -40 ~ +85 Yes 352-501-04 Red Water Clear 1.85* 20 2700 660 -40 ~ +85^ -40 ~ +85 Yes 352-521-04 Yellow Water Clear 2.2* 20 6100 595 -40 ~ +85^ -40 ~ +100 Yes 352-532-04 Green Water Clear 3.5* 20 11600 525 -30 ~ +85^ -40 ~ +100 Yes 352-930-04 Blue Water Clear 3.6* 20 3460 470 -30 ~ +85^ -40 ~ +100 Yes 352-997-04 Cold White Water Clear 3.6* 20 7800 *see below -30 ~ +85^ -40 ~ +100 Yes UNITS Vdc mA mcd nm 0C 0C l Snap-In l Supplied with 150mm flying lead terminations as standard l Sealed to IP40 l 352-535-04 can be used as a tri colour device l Product illustrated 352-535-04 PANEL INDICATOR LEDs - Ø6.35mm Mounting Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
352 SERIES
PACK QUANTITY = 20 PIECES SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS076/07 Issue 1 Page 1 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. STANDARD INTENSITY STANDARD INTENSITY ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997 *Typical emission colour cold white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318
Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip N/A Lens Epoxy Header PTFE BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 076/07 Issue 1 Page 2 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. SERIES MAXIMUM MAXIMUM PANEL MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 352 500 3 6.35 9.0 3.0 UNITS mW Vdc mm mm mm Anode termination indicated by long tag. Mounting hole to be clean an burr free Dimensions in mm (Typical) Not to scale MOUNTING HOLE OPTIONAL FLYING LEAD TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION
13 DC Products Red-anode / Black-cathode 150mm
13 AC Products Brown-live / Blue-neutral 150mm Customised
7/0.2mm 1.2mm lengths
17 DC Products Red-anode / Black-cathode 1000mm available
17 AC Products Brown-live / Blue-neutral 1000mm
ORDER CODE CIRCUIT COMMENTS SUFFIX
01 Available on all indicators except Bi-Colour
devices and when diode test is specified.
SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 076/07 Issue 1 Page 3 of 3 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NO. COLOUR VOLTAGE (Vdc) Vopr 352-503-04 Red 20mA 352-503-04-15 Red 20mA 352-503-04-50 Red 20mA 352-505-04-52 Red 20mA 352-505-12-50 Red 24Vdc 352-509-04 Yellow 20mA 352-509-04-15 Yellow 20mA 352-509-04-50 Yellow 20mA 352-511-04-53 Yellow 20mA 352-512-04 Green 20mA 352-512-04-15 Green 20mA 352-512-04-50 Green 20mA 352-512-04-51 Green 20mA 352-512-04-52 Green 20mA 352-530-04 Red/Green 20mA 352-535-04-15 Red/Green/Amber 20mA 352-535-04-53 Red/Green/Amber 20mA 352-535-04-54 Red/Green/Amber 20mA 352-535-04-56 Red/Green/Amber 20mA UNITS PART NO. COLOUR VOLTAGE (Vdc) Vopr 352-535-04-57 Red/Green/Amber 20mA 352-538-04-50 Red/Green/Amber 20mA 352-549-04 Green/Yellow 20mA 352-581-20-15 Red 5/6Vdc 352-581-20-52 Red 5/6Vdc 352-582-20-15 Yellow 5/6Vdc 352-582-20-50 Yellow 5/6Vdc 352-582-20-51 Yellow 5/6Vdc 352-583-20-15 Green 5/6Vdc 352-583-20-50 Green 5/6Vdc 352-583-20-54 Green 5/6Vdc 352-583-20-55 Green 5/6Vdc 352-584-21 Red 12Vdc 352-584-21-50 Red 12Vdc 352-585-21 Yellow 12Vdc 352-585-21-50 Yellow 12Vdc 352-586-21 Green 12Vdc 352-586-21-50 Green 12Vdc 352-586-21-51 Green 12Vdc UNITS Part numbers also available in the 352 Series: The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information cont ained within this datasheet. Please contact sales for further information. 505, 511, 532, 930 & 997 514 521 532 501 BS EN ISO 9001:2000 Approved Manufacturer