352-505-04_16 MARL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

352 SERIES

  • Ø 6.35m m m ounting
  • Plastic housing
  • R ange of LED colour options
  • C hoice of solder pins or w ires
  • Standard industrial m ounting size
  • Lightw eight and low cost solution
  • Suitable for status panel indication
  • Flexibility for different applications
  • O utstanding reliability Marl Part Number LED Colour Typical Voltage DC Vf Max. Reverse Voltage Max. Current DC If Max. Power Dissipation Typical LED Luminous Intensity @20mA Typical LED Wavelength λp Viewing Angle 2 Θ 1/2 Operating Temp Topr * Storage Temp Tstg 352 -505-04 R ed D iffused 2 .1 5 2 0 4 5 2 700 4 5 -2 5 to +85 -30 to +100 352 -509 -04 Yellow Tinted 2 5 30 85 4 0 59 0 35 -2 5 to +85 -30 to +100 352 -512 -04 G reen Tinted 2 .1 5 30 80 4 0 568 35 -2 5 to +85 -30 to +100 352 -52 0-04 B lue D iffused 4 5 2 5 150 15 4 30 4 5 -2 5 to +85 -30 to +100 Vdc Vdc mA mW mcd nm Deg °C °C OPTIONAL FLYING LEAD TERM INATORS Marl Part No Suffix Wire Length Wire Colour No/Diameter of Conductors Diameter of Insulation Wire Specification 352 -505-04 -40 305m m R ed - A node B lack - C athode 11/0.16m m 1.4 3m m 2 4 AW G NOTES A ll LED com ponents are supplied in anti-static packaging. * LED C haracteristics stated at Ta = 2 5°C . For operating tem perature derating graphs, please refer to sheet 2 . To order please contact us on +44 (0) 1229 582 430 Q 054 80 352 Version D S001/2 016. Page 1 of 2 m arlleds m arlinternationallim ited com pany/m arl-international-lim ited

To order please contact us on +44 (0) 1229 582 430 Q 054 80 352 Version D S001/2 016. Page 2 of 2 TECHNICAL CHARACTERISTICS Series Panel Cutout Min. Mounting Centres Min. - Max. Panel Thickness 352 6.35 17.0 1.2 - 2 .4 mm mm mm TECHNICAL DRAW ING D im ensions in m m (typical). N ot to scale. M ounting hole to be clean and burr free. 13.50.8 4.8 Ø4.8 LED 3.0 0.5 SQ. TYP. 17.3 1.0 2.5 Ø7.1 Flange Ø6.2 Body Single Colour DE-RATING GRAPHS M ATERIALS 02 0 4 0 6 0 8 0 1 0 0 Ambient Temperature Ta (°C) Forward Current If (mA) Red or Blue LED 02 0 4 0 6 0 8 0 1 0 0 Ambient Temperature Ta (°C) Forward Current If (mA) Green or Yellow LED Body N ylon 6/6 Lens Epoxy (LED Lens) Termination (Standard version) LED Leads Termination (Flying Leads version) W ires, Stripped and Tinned DESIGN CONSIDERATIONS Electro-Static Discharge (ESD) B uild up of electro-static discharge occurs in m any situations involving people m oving and handling products.The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in m any individual situations. W hen an operator charged up to these levels handles a static sensitive device, there is a very probable likelihood that the device w ill be irreversibly dam aged. It is essential that precautions are taken at all stages during m anufacture and assem bly of these products. A lthough LED s w ere never considered to be static sensitive devices, changes in m anufacturing technology and m aterials used to produce higher intensity products over a large range of the w avelength spectrum have changed this. M arl has an approved system of ESD control from goods in, through production and into final packing and despatch. M arl recom m end all users of LED based products follow the guidelines of B S 100015. Voltage, Current and Temperature The forw ard voltage / current value of an LED is dependent upon the am bient tem perature of the environm ent in w hich it is operated. Therefore, care m ust be taken to operate the LED at the correct voltage / current values, depending upon the am bient tem perature. M arl should be contacted if the device is to be operated outside the tem perature range specified. M arl accept no liability for any product that is operated outside the stated voltage or tem perature range. m arlleds m arlinternationallim ited com pany/m arl-international-lim ited 4.8 0.8 13.5 Ø5.0 LED 3.0 6.4 Stripped and Tinned Ø7.1 Flange Ø6.2 Body Single Colour (+) Red Wire (-) Black Wire Standard Version Flying Leads Version Mounting Hole 6.35 +0.0 W eight (g): 2 .8 W eight (g): 0.4