DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

© PHOENIX CONTACT 2017-06-203467_en_D BL FPM … Data sheet 1D e s c r i p t i o n The Basicline BL FPM … is an in dustrial flat-panel monitor that can be used in applications where a remote display lo- cation is required. 2F e a t u r e s – 15.6-, 18.5-, and 21.5-inch display – 10-point, multi-touch, touch screens – DisplayPort 1.2, VGA, and DVI-I input ports – Integrated configuration buttons Circuit ground (0 V) and functional earth ground (FE) are connected. Make sure you always use the latest documentation. It can be downloaded at phoenixcontact.net/products This data sheet is valid for all products listed on the following page: Flat-panel monitor for the industrial environment

BL FPM … 3467_en_D PHOENIX CONTACT 2/5 3O r d e r i n g d a t a

4 Technical data

Description Ty pe Order No. Pcs./Pkt. LCD touch screen monitor, 21.5 inch BL FPM 21.5 2400515 1 LCD touch screen monitor, 18.5 inch BL FPM 18.5 2402981 1 LCD touch screen monitor, 15.6 inch BL FPM 15.6 2402980 1 General data Ambient temperature (operating) -10 … 60°C Ambient temperature (storage/transport) -20 … 75°C Permissible humidity (relative) 10 … 90% non-condensing Weight 7 kg Mounting Panel cutout with bezel VESA MIS-D 100 Degree of protection IP65 (front), IP20 (back) LED indicators Power Electrical data Power supply, range 24 V DC -50%/+20% Current draw, maximum 1.72 A (12 V DC) Power connector 3-pos. removabl e COMBICON (Order No. 1786844) Display data, 21.5-inch display Overall dimensions, including bezel (W x H x D) 562 x 382 x 51mm Screen size, diagonal 548 mm (~21.5 in.) Screen size, horizontal x vertical 477 X 270 mm Aspect ratio 16:9 Resolution 1920 x 1080 Type 10-point projective capacitive touch screen Brightness 300 Cd/m² Number of colors 16.7 million Contrast ratio 5000:1 View angle, horizontal/vertical (CR=10), typ. 85°/80° Installation cutout dimensions (W x H) 547 x 367 mm Outside bezel dimensions (W x H x D) 562 x 382 x 9 mm Backlight life, minimum 50000 hr. Touch screen interface USB Type A Video signal VGA, DVI-I, DisplayPort (DP++)

BL FPM … 3467_en_D PHOENIX CONTACT 3/5 Display data, 18.5-inch display Overall dimensions, including bezel (W x H x D) 491 x 321 x 51 mm Screen size, diagonal 472 mm (~18.5 in.) Screen size, horizontal x vertical 412 X 232 mm Aspect ratio 16:9 Resolution 1366 x 768 Type 10-point projective capacitive touch screen Brightness 300 Cd/m² Number of colors 16.7 million Contrast ratio 1000:1 View angle, horizontal/vertical (CR=10), typ. 85°/80° Installation cutout dimensions (W x H) 475 x 305 mm Outside bezel dimensions (W x H x D) 591 x 321 x 10 mm Backlight life, minimum 50000 hr. Touch screen interface USB Type A Video signal VGA, DVI-I, DisplayPort (DP++) Display data, 15.6-inch display Overall dimensions, including bezel (W x H x D) 417 x 312 x 52 mm Screen size, diagonal 397 mm (~15.6 in.) Screen size, horizontal x vertical 346 X 195 mm Aspect ratio 16:9 Resolution 1366 x 768 Type 10-point projective capacitive touch screen Brightness 300 Cd/m² Number of colors 16.7 million Contrast ratio 500:1 View angle, horizontal/vertical (CR=10), typ. 85°/80° Installation cutout dimensions (W x H) 401 x 296 mm Outside bezel dimensions (W x H x D) 417 x 312 x 6 mm Backlight life, minimum 50000 hr. Touch screen interface USB Type A Video signal VGA, DVI-I, DisplayPort (DP++) Conformity Shock tests according to IEC 60068-2-27 15g, 11 ms impulse Vibration according to IEC 60068-2-64 1g

BL FPM … 3467_en_D PHOENIX CONTACT 4/5

5 Installation

5.1 Panel installation

  1. Cut the appropriate size hole in the enclosure where the monitor will be installed. Figure 1 Panel cutout dimensions 2. From the front, push the BL FPM … through the open- ing. Ensure the gasket is properly positioned in the groove. 3. From the rear, place the display clamps (1) in the slots (2) on the display and slide the clamp to the right. All eight clamps must be used, one in every slot. Figure 2 Monitor mounting clamp 4. Tighten the screws on all clamps, alternating from one side to the other until the front bezel is secure against the mounting cutout. Torque the bolts to 1.2 Nm.

5.2 VESA mounting

In addition to panel installation, the BL FPM … can be in- stalled on a VESA mount. The rear of the BL FPM … con- forms to the 100 mm variant of the VESA MIS-D mounting standard.

5.3 Connections

Connectors to interface with the computer are located on the rear bottom of the BL FPM …. Figure 3 Monitor connections

  • P o w e r : Connect 12/24 V DC power to the included re- movable power connector (Order No. 1786844). This connector supports wire sizes from 0.2 to 2.5 mm² (24 to 12 AWG). Tighten the wire retaining screws using 0.5 Nm (4.4 lb f-ft) torque.
  • D i s p l a y P o r t ( D / P ): This port connects to a DisplayPort on a computer.
  • V G A : This DB-15 port connects to the computer to re- ceive analog video signals (1.8 m VGA cable included).
  • D V I - I : This DVI-I port connects to the computer to re- ceive digital (DVI) video signals. Display X (mm) Y (mm) 21.5 in. 547 367 18.5 in. 475 306 15.6 in. 401 296 X Y While the BL FPM … includes a VESA mount, this method negates the IP65 environmental rat- ing and other mechanical tests. M4 hardware is not included. It is typically includ- ed with the VESA mount, which must be pur- chased separately. All ports were tested with a shielded 1.8 m cables. The VGA and DVI cables included a ferrite core. Phoenix Contact will not ensure functionality of cables that are outside this specification. DisplayPort, VGA, DVI-I, and USB ports are re- stricted to 1.8 m cables to meet the test environ- ment. VGA and DVI-I cables require double-ended fer- rite cores. X1: PWR 24VDC X3: VGA X4: DVI X5: USBX2: D/P VGA DisplayPort Power USB DVI-I

BL FPM … 3467_en_D 5/5PHOENIX CONTACT GmbH & Co. KG • Flachsmarktstraße 8 • 32825 Blomberg • Germany phoenixcontact.com

  • U S B : USB Type A port provides the touch screen inter- face to the PC. A USB type A to type A cable is included with the BL FPM … monitor. The USB port on the BL FPM … is a dedicated touch screen interface. It is not intended for con- nection to other types of USB devices.