327-000-21-50 MARL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC DC INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA lp Topr Tstg 327-000-21-50 Red/Yellow White Diffused 12 20 900/4300 660/590 -40 ~ +85^ -40 ~ +85 Yes 327-000-21-53 Red/Green White Diffused 12 20 900/7800 660/525 -40 ~ +85^ -40 ~ +85 Yes 327-000-21-55 Yellow/Green White Diffused 12 20 4300/7800 590/525 -40 ~ +85^ -40 ~ +85 Yes 327-501-21 Red Colour Diffused 12 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 327-521-21 Yellow Colour Diffused 12 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 327-532-21 Green Colour Diffused 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 327-930-21 Blue Colour Diffused 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 327-997-21 Cold White Colour Diffused 12 20 14000 *see below -40 ~ +95^ -40 ~ +100 Yes 327-501-23 Red Colour Diffused 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 327-521-23 Yellow Colour Diffused 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 327-532-23 Green Colour Diffused 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 327-930-23 Blue Colour Diffused 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 327-997-23 Cold White Colour Diffused 24-28 20 14000 *see below -40 ~ +95^ -40 ~ +100 Yes UNITS Vdc mA mcd nm 0C 0C l Unobtrusive lens for flush mounting l Flying lead terminations and low current versions available l Sealed to IP40 l Supplied complete with mounting hardware l Product illustrated 327-501-21 PANEL INDICATOR LEDs - Ø8.0mm Mounting Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.
FEATURES
327 SERIES
PACK QUANTITY = 20 PIECES SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS080/07 Issue 1 Page 1 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. Refer to page 3. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. 997F-C *Typical emission colour cold white x 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 HIGH INTENSITY
Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip Spring steel Fresnel lens Polycarbonate Header PTFE BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 Page 2 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. MATERIALS PUSH-ON CONNECTORS TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM PANEL MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 327 625 3 8.0 17.0 13.0 UNITS mW Vdc mm mm mm 909-000-00 is gold plated 910-000-00 is tin plated for use with 327 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance and gas tight electrical contact. Dimensions in mm (Typical) Not to scale Dimensions in mm (Typical) Not to scale OPTIONAL FLYING LEAD TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION
13 DC Products Red-anode / Black-cathode 150mm
13 AC Products Brown-live / Blue-neutral 150mm Customised
7/0.2mm 1.2mm lengths
17 DC Products Red-anode / Black-cathode 1000mm available
17 AC Products Brown-live / Blue-neutral 1000mm
ORDER CODE CIRCUIT COMMENTS SUFFIX
01 Available on all indicators except Bi-Colour
devices and when diode test is specified. Anode termination indicated by long tag for single colour, high intensity devices MOUNTING HOLE Colour dot denotes LED colour Common Anode
BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 Page 3 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. Diode Test Facility 512 & 514 505, 511, 532, 930 & 997 521 De-rating Information ORDER CODE TERMINATION CIRCUIT COMMENTS SUFFIX 03 3 PINS 05 150mm of flying leads colours as shown TEST 09 1000mm of flying leads colours as shown POSITIVE Not available with Bi-colour 04 3 PINS LED 06 150mm of flying leads colours as shown TEST 10 1000mm of flying leads colours as shown NEGATIVE 535 501 Test Positive Test Negative Test Anode Cathode Identification Mark Test Anode Cathode Identification Mark
BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 080/07 Issue 1 Page 4 of 4 How to Order: Telephone +44 (0)1229 582430 Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NO. COLOUR VOLTAGE (Vdc) Vopr 327-000-21-51 Yellow/Yellow 12Vdc 327-000-21-54 Red/Red 12Vdc 327-000-22-50 Red/Red 24Vdc 327-000-22-51 Red/Yellow 24Vdc 327-000-22-54 Red/Yellow 24Vdc 327-000-22-55 Red/Green 24Vdc 327-000-22-61 Red/Green 24Vdc 327-000-22-62 Red/Red 24Vdc 327-000-22-63 Red/Yellow 24Vdc 327-000-22-64 Yellow/Green 24Vdc 327-000-22-65 Yellow/Green 24Vdc 327-501-04 Red 20mA 327-501-20-50 Red 5/6Vdc 327-501-21 Red 12Vdc 327-501-22 Red 24Vdc 327-501-22-50 Red 24Vdc 327-501-22-51 Red 24Vdc 327-501-24 Red 48Vdc 327-501-25 Red 110Vdc 327-501-76-19 Red 230Vac 327-502-22 Red 24Vdc 327-502-22-02 Red 24Vdc 327-502-22-50 Red 24Vdc 327-502-42 Red 15Vdc 327-502-42-02 Red 15Vdc 327-502-53 Red 50Vdc 327-502-75 Red 110Vac 327-503-04-21 Red 20mA 327-503-22 Red 24Vdc 327-503-24 Red 48Vdc 327-505-04-03 Red 20mA 327-509-22 Yellow 24Vdc 327-509-42 Yellow 15Vdc 327-511-04-03 Green 20mA UNITS Part numbers also available in the 327 Series: The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information cont ained within this datasheet. Please contact sales for further information. PART NO. COLOUR VOLTAGE (Vdc) Vopr 327-512-04 Green 20mA 327-512-04-03 Green 20mA 327-512-20 Green 5/6Vdc 327-512-22 Green 24Vdc 327-512-48-50 Green 60Vdc 327-514-48-50 Green 60Vdc 327-521-04 Yellow 20mA 327-521-21 Yellow 12Vdc 327-521-22 Yellow 24Vdc 327-521-22-50 Yellow 24Vdc 327-521-24 Yellow 48Vdc 327-521-42-50 Yellow 15Vdc 327-521-60 Yellow 75Vdc 327-521-75 Yellow 110Vac 327-532-04 Green 20mA 327-532-20 Green 5/6Vdc 327-532-22 Green 24Vdc 327-532-22-50 Green 24Vdc 327-532-24 Green 48Vdc 327-532-25 Green 110Vdc 327-532-76-13 Green 230Vac 327-532-76-19 Green 230Vac 327-535-22-35 Green 24Vdc 327-930-04 Blue 20mA 327-930-21 Blue 12Vdc 327-930-22 Blue 24Vdc 327-930-75 Blue 110Vac 327-997-04 White 20mA 327-997-22 White 24Vdc 327-997-76-15 White 230Vac 327-997-76-50 White 230Vac 327-997-76-51 White 230Vac UNITS