30718 VICOR | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

2.220 2.000 .16 TYP (12) PL. SEE NOTE 5 <> ( .1285 ) (6) PL. #30 DRILL THRU 4.60 3.600 .50 1.800 .11 SEE NOTE 6 .40 .190 .100 .010 MATL TO BE REMOVED -A- .005 .410 NOTES: MATERIAL: EXTRUSION SEE SHEET 2 OF 2.1. REMOVE ALL BURRS AND SHARP EDGES.2. CLEAR FINISH, RoHS COMPLIANT PER CST-0001, LATEST 3. REVISION PER A.) CHROMIUM FREE, OR B.) TRIVALENT CHROMIUM IN ACCORDANCE WITH MIL-DTL-5541, TYPE II, CLASS 1A OR 3. SEE CST-0003 FOR TYPES OF AVAILABLE FINISHES. "<>" DENOTES CRITICAL CHARACTERISTIC FOR LOT INSPECTION.'4. DIMENSIONS APPLIES AT SURFACE -A- (12) PL.5. MACHINED SURFACE TO BE .010 MAX BELOW SURFACE -A- (6) PL.6. DIMENSIONS ARE INCHES ONLY.7. REV. DESCRIPTION DATE APPROVED

1 RELEASED PER ECO REQUEST E070416 REJH 03/05/07 EF

2 REVISED PER ECO REQUEST E091085 AR 07/14/09 REJH

3 REDRAWN PER E100871 DCS 6/11/10 KUK

4 REVISED PER E120702 ZMB 07/31/12 REJH

THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. SCALE TOLERANCES ARE: DECIMALS ANGLES SHEET OF SIZE 67131 CAGE CODE 30718 DWG NO REV DRAWN BY DATE D.P. KELLY 10/05 HS CFG 'A' LONG .4H LOW FLOW, THRU HOLE SWDVICOR THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 1 21:1 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] C

3.00°

1.5 EACH

.410 .200 .110 2.220-.000 +.020 R.010 (2) PL. .235 R.035 R.035 (24) PL. .017 (2) PL. * .138 (2) PL. * .133 (9) PL. * .269 * .058 (2) PL. * .060 (8) PL. A SEE DETAIL A .023 .036 R.018 (2) PL. .031 .040 R.030 (8) PL. .080 .252 * .060 1.756 * .030 DETAIL A SCALE 8 : 1 NOTES: MATL: ALUMINUM 6063-T51. * DENOTES DIMENSION TO THEORETICAL SHARP CORNER.2. ALL DIMENSIONS ARE CRITICAL CHARACTERISTICS3. RoHS COMPLIANT PER CST-0001 LATEST REVISION.4. DIMENSIONS ARE INCHES ONLY5. PROFILE COMMON FOR 30195 30718 32188 30482 A A B B C C D D E E F F VICOR CONFIDENTIAL THIS DOCUMENT AND THE DATA DISCLOSED HEREIN OR HEREWITH IS NOT TO BE REPRODUCED, USED OR DISCLOSED IN WHOLE OR IN PART TO ANYONE WITHOUT THE PERMISSION OF VICOR CORP. SCALE TOLERANCES ARE: DECIMALS ANGLES SHEET OF SIZE 67131 CAGE CODE 30718 DWG NO REV DRAWN BY DATE A. RAGIPANI 07/14/09 HS CFG "A" LONG .4H LOW FLOW, THRU HOLE, EXTRUSION SWDVICOR THIRD ANGLE PROJECTION DO NOT SCALE DRAWING 2 21:1 UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE : INCH / [MM] REV APPROVED REVISIONS DATEDESCRIPTION SEE SHEET 1 C