318-530-23

318-530-04 MARL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

l Domed fresnel lens styling for wide viewing angle l Flying lead terminations available l Available as a Red/Amber/Green tri-colour indicator l Sealed to IP40 l Supplied complete with mounting hardware l Product illustrated 318-530-23 PANEL INDICATOR LEDs - Ø6.35mm Mounting Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure Typically = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED.

FEATURES

318 SERIES

Bi-colour & Tri-colour PACK QUANTITY = 20 PIECES SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS083/07 Issue 1 Page 1 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NUMBER COLOUR LENS VOLTAGE CURRENT LUMINOUS WAVE OPERATING STORAGE DC (Vdc) DC (mA) INTENSITY LENGTH TEMP TEMP Vopr lopr lv@20mA (mcd) lp (nm) Topr Tstg 318-530-04 Red/Green Water Clear 2.0/2.2 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-20 Red/Green Water Clear 5/6 15/20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-21 Red/Green Water Clear 12 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-530-23 Red/Green Water Clear 24-28 20 30/25 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-04-35 Red/Green Water Clear 2.0/2.2 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-20-35 Red/Green Water Clear 5/6 15/20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-21-35 Red/Green Water Clear 12 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes 318-535-22-35 Red/Green Water Clear 24-28 20 60/50 627/565 -40 ~ +85^ -40 ~ +85 Yes UNITS Vdc mA mcd nm °C °C BI-COLOUR STANDARD INTENSITY TRI-COLOUR STANDARD INTENSITY ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown. 530 & 535

Termination Pins Tin on Nickel Plated Phosphor Bronze Retaining Clip Spring steel Fresnel lens Polycarbonate Header PTFE BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 083/07 Issue 1 Page 2 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service.

318 Bi-colour and Tri-colour Series

MATERIALS PUSH-ON CONNECTORS TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM PANEL MINIMUM MIN/MAX. POWER REVERSE CUTOUT MOUNTING PANEL DISSIPATION VOLTAGE CENTRES THICKNESS 318 500 3 6.35 13.0 9.0 UNITS mW Vdc mm mm mm 909-000-00 is gold plated 910-000-00 is tin plated for use with 318 series. Suitable for wire sizes from 0.15mm² to 0.38mm² cross sectional area. Dual metal contact design provides low resistance and gas tight electrical contact. Dimensions in mm (Typical) Not to scale Dimensions in mm (Typical) Not to scale OPTIONAL FLYING LEAD TERMINATIONS ORDER SUPPLY WIRE WIRE NO/DIAMETER DIAMETER COMMENTS CODE VOLTAGE COLOUR LENGTH OF OVER SUFFIX CONDUCTORS INSULATION

13 DC Products Red-anode / Black-cathode 150mm

13 AC Products Brown-live / Blue-neutral 150mm Customised

7/0.2mm 1.2mm lengths

17 DC Products Red-anode / Black-cathode 1000mm available

17 AC Products Brown-live / Blue-neutral 1000mm

Red dot denotes red anode, green dot denotes green anode. Centre pin cathode on tri-colour version. MOUNTING HOLE Bi-colour Tri-colour

BS EN ISO 9001:2000 Approved Manufacturer SAMPLES AVAILABLE© MARL INTERNATIONAL LTD 2007 : DS 083/07 Issue 1 Page 3 of 3 How to Order: • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a represent ation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. PART NO. COLOUR VOLTAGE (Vdc) Vopr 318-502-20-03 Red 5/6Vdc 318-502-22-03 Red 24Vdc 318-503-21 Red 12Vdc 318-503-22 Red 24Vdc 318-503-22-03 Red 24Vdc 318-503-22-04 Red 24Vdc 318-506-22-03 Orange 24Vdc 318-509-22 Yellow 24Vdc 318-512-21-13 Green 12Vdc 318-512-22-03 Green 24Vdc 318-512-23 Green 24-28Vdc 318-513-23 Green 24-28Vdc 318-519-22 Blue 24Vdc 318-521-22 Yellow 24Vdc 318-530-04 Red/Green 20mA 318-530-20-50 Red/Green 5/6Vdc 318-530-22 Red/Green 24Vdc 318-530-22-50 Red/Green 24Vdc 318-535-04 Red/Green Tri 20mA 318-535-04-35 Red/Green Tri 20mA 318-535-20-35 Red/Green Tri 5/6Vdc 318-535-21 Red/Green Tri 12Vdc 318-535-21-35 Red/Green Tri 12Vdc 318-535-21-50 Red/Green Tri 12Vdc 318-535-22 Red/Green Tri 24Vdc 318-535-22-13 Red/Green Tri 24Vdc 318-535-22-17 Red/Green Tri 24Vdc 318-535-22-19 Red/Green Tri 24Vdc 318-535-22-35 Red/Green Tri 24Vdc 318-535-22-54 Red/Green Tri 24Vdc 318-535-22-55 Red/Green Tri 24Vdc 318-535-24-35 Red/Green Tri 48Vdc 318-535-71 Red/Green Tri 12Vac 318-536-21 Red/Yellow Tri 12Vdc 318-538-22 Red/Green Tri 24Vdc UNITS Part numbers also available in the 318 Series: The products listed above illustrate all of the options available to order . These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information.