30DAWE GAPTEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 1 of 4 30DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 30DAWE_1.5 series 30W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Efficiency up to 90% 2:1 wide input voltage range Output over current, over voltage protection Short circuit protection (SCP) 1.5kVDC isolation No-load power consumption as low as 0.14W Operating temperature range: -40°C ~ +80°C Six-sided metal shield Industry standard pinout Meet CISPR32/EN55032 CLASS A, without extra components EN/UL60950 approved DC-DC Converter 30 Watt The 30DAWE_1.5 series are isolated 30W DC-DC products with a wide 2:1 input voltage and feature efficiencies of up to 90%, input to output isolation is tested with 1500VDC and the converters safely operate ambient temperature of -40°C to +80°C, output short-circuit, over- voltage, over-current protection. They meet CLASS A of CISPR32/EN55032 EMI standards without external components. They are widely used in applications such as data transmission device, battery power supply device, tele-comunication device, distributed power supply system, hybrid module system, remote control system, industrial robot fields. Example: 30DAWE_2415S1.5 30 = 30Watt; D = DIP; A = series; W = wide input (2:1) 18-36Vin; E = cost effective; 15Vout; S = single output; 1.5 = 1500VDC isolation Input specifications Item Test condition Min Typ Max Units Reflected ripple current 40 mA Surge voltage (1 sec. max)

  • 24VDC input
  • 48VDC input -0.7 -0.7 100 VDC VDC Start-up voltage • 24VDC input
  • 48VDC input VDC VDC Start-up time Nominal input & cons- tant resistance load 10 ms Input filter Pi Hot plug Unavailable Ctrl (1) • Module on
  • Module off
  • Input current when off Ctrl pin open or pulled high (3.5-12VDC) Ctrl pin pulled low to GND (0-1.2VDC) 5 8 mA ① The Ctrl pin voltage is referenced to input GND. Common specifications Short circuit protection: Hiccup, continous, self-recovery Cooling: Free air convection Operation temperature range: -40°C~+80°C Storage temperature range: -55°C~+125°C Pin soldering resistance temperature: 300°C MAX, 1.5mm from case for 10 sec Vibration: 10-55Hz, 2G, 30 Min. along X, Y and Z Storage humidity range: 5-95%RH Switching frequency (PWM mode): 300KHz TYP Case material: Aluminium alloy MTBF (MIL-HDBK-217F@25°C): 1000 K hours MIN Weight: 27.8g Dimensions: 50.80 × 25.40 × 11.80 mm ① Switching frequency is measured at full load. The module reduces the switching frequency for light load (below 50%) efficiency improvement. Output specifications Item Test condition Min Typ Max Units Output voltage accuracy 5%-100% load 0%-5% load Line regulation Full load, input voltage low to high ±0.2 ±0.5 % Load regulation (1) 5%-100% load ±0.5 ±1 % Transient recovery time 25% load step change 300 500 µs Transient respon- se deviation 25% load step change
  • 3.3/5/±5VDC output
  • others Temperature drift 100% full load ±0.03 %/°C Ripple & Noise(3) 20MHz Bandwidth 50 100 mVp-p Trim Input voltage range (24V/48V input series) ±10 %Vo Over voltage protection Input voltage range (all models; except 30DAWE_12110S1.5) 110 160 %Vo Over current protection Input voltage range 110 190 %Io ① Load regulation for 0%-100% load is ±5%; ② The “parallel cable” method is used for Ripple and Noise test. Isolation specifications Item Test condition Min Typ Max Units Isolation voltage Tested for 1 minute and leakage current less than 1 mA

1500 VDC

Isolation resistance Test at 500VDC 1000 MΩ Isolation capacitance 100KHz/0.1V 2000 pF Note: 1. The maximum capacitive load offered were tested at input voltage range and full load; 2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta = 25°C, humidity <75%RH with nominal input voltage and rated output load; 3. All index testing methods in this datasheet are based on company corporate standards; 4. We can provide product customization service, please contact our technicians directly for specific information; 5. Products are related to laws and regulations: see „Features“ and „EMC“; 6. Our products shall be classified according to ISO14001 and related environmen- tal laws and regulations, and shall be handled by qualified units. UL-60950-1 (E347551)

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 2 of 4 30DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 30DAWE_1.5 series 30W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Part Number Input Voltage [VDC] Nominal Range Max(1) Output Voltage [VDC] Output Current [mA, Max] Input Current [mA, typ/max] Full load No load Efficiency (2) [%, Typ.] Capacitive load [µF, Max] 30DAWE_2403S1.5 24 18-36 40 3.3 6000 1471/1507 60/100 85 10000 30DAWE_2405S1.5 24 18-36 40 5 6000 1421/1453 60/100 88 10000 30DAWE_2409S1.5 24 18-36 40 9 3333 1389/1489 6/12 86 4700 30DAWE_2412S1.5 24 18-36 40 12 2500 1389/1489 6/12 88 2700 30DAWE_2415S1.5 24 18-36 40 15 2000 1389/1489 6/12 90 1680 30DAWE_2424S1.5 24 18-36 40 24 1250 1389/1489 6/12 90 680 30DAWE_4803S1.5 48 36-75 80 3.3 6000 727/745 20/30 86 10000 30DAWE_4805S1.5 48 36-75 80 5 6000 711/727 20/35 88 10000 30DAWE_4812S1.5 48 36-75 80 12 2500 711/727 5/10 88 2700 30DAWE_4815S1.5 48 36-75 80 15 2000 711/727 5/10 89 1680 30DAWE_4824S1.5 48 36-75 80 24 1250 711/727 5/10 89 680 ① Exceeding the maximum input voltage may cause permanent damage; ② Efficiency is measured In nominal input voltage and rated output load. EMC specifications EMI CE CISPR32/EN550232 CLASS A (without external components) CLASS B (see EMC compliance circuit ②) EMI RE CISPR32/EN55032 CLASS A (without external components) CLASS B (see EMC compliance circuit ②) EMS ESD IEC/EN61000-4-2 Contact ±4KV perf. Criteria B EMS RS IEC/EN61000-4-3 10V/m perf. Criteria A EMS EFT IEC/EN61000-4-4 ±2KV (see EMC compliance circuit ①) perf. Criteria B EMS Surge IEC/EN61000-4-5 line to line ±2KV (see EMC compliance circuit ①) perf. Criteria B EMS CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A Typical characteristics 3VDC/5VDC output 9VDC/12VDC/15VDC/24VDC output

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 3 of 4 30DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 30DAWE_1.5 series 30W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Efficiency 30DAWE_2405S1.5 30DAWE_2405S1.5 Typical application All the DC/DC converters of this series are tested before delivery using the recommended circuit shown in Fig. 1. Input and/or output ripple can be further reduced by appropriately increasing the input & output capacitor values Cin and Cout and/or by selecting capacitors with a low ESR (equivalent series resistance). Also make sure that the capacitance is not exceeding the specified max. capacitive load value of the product. Figure 1 EMC recommended circuit Refer to Cout in figure 1

GAPTEC-Electronic GmbH & Co. KG sales@gaptec-electronic.com – www.gaptec-electronic.com Page 4 of 4 30DAWE_1.5 – Rev. 2020-1.1 Specifications subject to change without notice. 30DAWE_1.5 series 30W - Single/Dual Output - Wide Input - Isolated & Regulated DC-DC Converter Trim Trim Function for Output Voltage Adjustment (open if unused) Mechanical dimensions