DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 30C90 definite purpose contactor

  • 30C 90FLA Definite Purpose Contactor
  • Robust 2 & 3 Pole Contactor
  • Arc Covers as standard
  • Industry Standard Mounting
  • RoHS Compliant
  • UL File No: E61703 Ref: 30C90 101711JHM Contact Data Table 1 Arrangements: 2 Form X (2PST-NO-DM)

3 Form X (3PST-NO-DM)

Material: AgCdO, AgSnOInO Model No Full Load Amps (FLA) Poles Line Voltage (VAC) Locked Rotor Amps (LRA) Resistive Amps Max. HP Voltage 1 Phase 3 Phase 30C90-1022 90 2 120 540 120 120 7.5 - 240/277 540 240 20 30 480 450 480 - 50 600 360 600 - 50 30C90-1023 90 3 120 540 120 120 7.5 - 240/277 540 240 20 30 480 450 480 - 50 600 360 600 - 50 FLA rating tested for 6000 cycles of endurance at 240/480/600VAC per UL508. Resistive Heat rating tested for 250,000 cycles at 277VAC. LRA rating tested for 6000 cycles of Locked Rotor endurance per UL508. Coil Data Table 2 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code Rated Voltage 50/60Hz Coil Resistance (Ohms) Coil Operating Voltage (VAC) Minimum Inrush Nominal Coil Power Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 5024 24 0.63 6 18 26.4 285 240 42 27 5120 120 15.6 20 88 132 285 240 42 27 5230 208/240 63.5 40 177 264 285 240 42 27 5277 277 84 65 220 305 285 240 42 27 5480 480 255 150 384 528 285 240 42 27

definite purpose contactor Page 2 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 General Specifications Table 2 Initial Operate Time mS 40 Terminations Release Time mS 25 (typical) Coil Terminals 0.250” QC + #6-32 screw (dual 0.250” QC optional) - per terminalBounce Time mS ≤ 15 Arc Cover Standard Power Terminals box lug 14-1/0 AWG Insulation System UL Class B 130°C Initial Dielectric Strength between contacts and coil VAC 2200 between poles VAC 2200 (includes shunt) Recommended Tightening Torque box lug 50 in.lbf (5.65 Nm) between open contacts VAC 2200 Temperature Range °C -40 ... +65 Wire size box lug 14-1/0 AWG Unit Weight (approx.) 3 pole 4lb Ordering Codes Type Contact material Contact arrangement Cover protection and terminations Coil code Special options 3 0 C 9 0 - 1 0 2 - 1 - - Contact Ratings 90 - 90FLA see Table 1Contact Material 10 - AgCdO (standard) 70 - AgSnOInO Contact number & arrangement 22 - DPST-NO 23 - 3PST-NO Cover protection category 1 - IP00, no overall cover Termination Codes (see drawings for full specifications) 1 - #10-32 combination philips screw with quad QC blades 2 - Same as 1 with sems screw and pressure plate 3 - #14-4AWG box lug with quad QC blades (box lug with quick connect) 4 - #14-4AWG box lug with dual QC blades (box lug with quick connect) (std for 40FLA) 5 - #10-32 combination phillips screw with dual QC blades (20-30FLA) 6 - #14-2AWG box lug with QC blades (standard for 50-60FLA) 7 - #14-1AWG box lug with QC blades (standard for 75-150FLA) Reserved for Customer Specific Requirements 001 - Dual 0.25” QC blades for coil terminations 002 - 999 - optional customer specific number T Terminals L Terminals Ref: 30C90 101711JHM

definite purpose contactor Page 3 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 American Electronic Components Inc,. 1100 Lafayette St., Elkhart, IN 46516 Toll Free: (888) 847-6552, Tel: (574) - 295-6330 www.aecsensors.com Specifications and availability are liable to change without notice. Dimension in inches Overall Dimensions Dimensions in inches

2 Pole same as 3 pole minus centre terminals

Fig. 1 Ref: 30C90 101711JHM 4.05 3.75 3.75 .20 2.90 2.50 4.625.00 Power Terminations Termination Codes: 1 & 5 Standard for 20-30FLA only #10-32 combination phillips/slotted and 5/16 hex head screw with #12 washer Termination Code: 6 Standard for 50 & 60FLA Box Lug 14-2 AWG (Cu/Al) Termination Code: 2 Optional for 20-40FLA only. #10-32 sems screw with pressure plate Termination Code: 7 Standard for 75 & 90FLA Box Lug 14-1 AWG (Cu/Al) Termination Codes: 3 & 4 Standard for 40FLA only Box Lug 14-4 AWG (Cu/Al) 0.25 6 Dimension in inches 0.28 6 0.39 5