30C60 AEC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Page 1 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 30C60 definite purpose contactor

  • 30C 60FLA Definite Purpose Contactor
  • Robust 2 & 3 Pole Contactor
  • Arc Covers as standard
  • Industry Standard Mounting
  • RoHS Compliant
  • UL File No: E61703 Ref: 30C60 101711JHM Contact Data Table 1 Arrangements: 2 Form X (2PST-NO-DM)

3 Form X (3PST-NO-DM)

Material: AgCdO, AgSnOInO Model No Full Load Amps (FLA) Poles Line Voltage (VAC) Locked Rotor Amps (LRA) Resistive Amps Max. HP Voltage 1 Phase 3 Phase 30C60-1022 60 2 120 360 120 5 - 240/277 360 240 10 25 480 300 480 7.5 30 600 240 600 - 30 30C60-1023 60 3 120 360 120 5 - 240/277 360 240 10 25 480 300 480 7.5 30 600 240 600 - 30 FLA rating tested for 6000 cycles of endurance at 240/480/600VAC per UL508. Resistive Heat rating tested for 250,000 cycles at 277VAC. LRA rating tested for 6000 cycles of Locked Rotor endurance per UL508. Coil Data Table 2 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code Rated Voltage 50/60Hz Coil Resistance (Ohms) Coil Operating Voltage (VAC) Minimum Inrush Nominal Coil Power Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 5024 24 2.4 6 18 30 138 130 18 13 5120 120 45 20 88 132 138 130 18 13 5230 208/240 180 40 177 264 138 130 18 13 5277 277 280 65 220 300 138 130 18 13 5480 480 852 150 384 520 138 130 18 13

definite purpose contactor Ref: 30C60 101711JHM Page 2 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 General Specifications Table 2 Initial Operate Time mS 30 Terminations Release Time mS 15 (typical) Coil Terminals 0.250” QC + #6-32 screw (dual 0.250” QC optional) - per terminalBounce Time mS ≤ 10 Arc Cover Standard Power Terminals screw #1/4-20 Screw (with or with- out sems plate)Insulation System UL Class B 130°C Initial Dielectric Strength box lug 14-2 AWG between contacts and coil VAC 2200 between poles VAC 2200 (includes shunt) Recommended Tightening Torque #1/4-20 40 in.lbf (4.53 Nm) between open contacts VAC 2200 box lug 50 in.lbf (5.65 Nm) Temperature Range °C -40 ... +65 Wire size #1/4-20 16-8AWG* Unit Weight (approx.) 3 pole 22.4 oz box lug 14-2AWG * Must use ring terminals Ordering Codes Type Contact material Contact arrangement Cover protection and terminations Coil code Special options 3 0 C 6 0 - 1 0 2 - 1 - - Contact Ratings 60 - 60 FLA see Table 1Contact Material 10 - AgCdO (standard) 70 - AgSnOInO Contact number & arrangement 22 - DPST-NO 23 - 3PST-NO Cover protection category 1 - IP00, no overall cover Termination Codes (see drawings for full specifications) 1 - #10-32 combination philips screw with quad QC blades 2 - Same as 1 with sems screw and pressure plate 3 - #14-4AWG box lug with quad QC blades (box lug with quick connect) 4 - #14-4AWG box lug with dual QC blades (box lug with quick connect) (standard for 40FLA) 5 - #10-32 combination phillips screw with dual QC blades (standard for 20-30FLA) 6 - #14-2AWG box lug with QC blades (standard for 50-60FLA) 7 - #14-1AWG box lug with QC blades (standard for 75-150FLA) Reserved for Customer Specific Requirements 001 - Dual 0.25” QC blades for coil terminations 002 - 999 - optional customer specific number T Terminals L Terminals

definite purpose contactor Ref: 30C60 101711JHM Page 3 of 3 www.aecsensors.com Sales Department Tel: (888) 847-6552 American Electronic Components Inc,. 1100 Lafayette St., Elkhart, IN 46516 Toll Free: (888) 847-6552, Tel: (574) - 295-6330 www.aecsensors.com Specifications and availability are liable to change without notice. Overall Dimensions Dimensions in inches

2 Pole same as 3 pole minus centre terminals

2.75 .362 2.187 .215 3.140 3.231 1.467 2.033.450 Fig. 1 Power Terminations Termination Codes: 1 & 5 Standard for 20-30FLA only #10-32 combination phillips/slotted and 5/16 hex head screw with #12 washer Termination Code: 6 Standard for 50 & 60FLA Box Lug 14-2 AWG (Cu/Al) Termination Code: 2 Optional for 20-40FLA only. #10-32 sems screw with pressure plate Termination Code: 7 Standard for 75 & 90FLA Box Lug 14-1 AWG (Cu/Al) Termination Codes: 3 & 4 Standard for 40FLA only Box Lug 14-4 AWG (Cu/Al) 0.25 6 Dimension in inches 0.28 6 0.39 5