30A01C SANYO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Large current capacity.
  • Low collector-to-emitter saturation voltage (resistance). R CE (sat) typ=0.67Ω [IC =0.3A, IB =15mA].
  • Ultrasmall package facilitates miniaturization in end products.
  • Small ON-resistance (Ron). Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Collector-to-Base Voltage V CBO - -30 V Collector-to-Emitter Voltage V CEO - -30 V Emitter-to-Base Voltage V EBO -- 5 V Collector Current I C - -300 mA Collector Current (Pulse) I CP - -600 mA Collector Dissipation P C Mounted on a glass epoxy board (205 305 1.6mm). 300 mW Junction Temperature Tj 150 °C Storage Temperature Tstg - -55 to +150 °C Electrical Characteristics at Ta=25°C RatingsParameter Symbol Conditions min typ max Unit Collector Cutoff Current I CBO VCB =- -30V, IE=0 - -0.1 µA Emitter Cutoff Current I EBO VEB =- -4V, IC =0 - -0.1 µA DC Current Gain h FE VCE =- -2V, IC =- -10mA 200 500 Gain-Bandwidth Product f T VCE =- -10V, IC =- -50mA 520 MHz Output Capacitance Cob V CB =- -10V, f=1MHz 3 pF Collector-to-Emitter Saturation Voltage VCE (sat) I C =- -100mA, IB=- -5mA - -110 - -220 mV Base-to-Emitter Saturation Voltage V BE (sat) I C =- -100mA, IB=- -5mA - -0.9 - -1.2 V Marking : XQ Continued on next page. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 30A01C Low-Frequency General-Purpose Amplifier Applications Package Dimensions unit : mm 2018B [30A01C] O3003 TS IM TA-100648 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. PNP Epitaxial Planar Silicon Transistor 1 : Base 2 : Emitter 3 : Collector SANYO : CP 0.4 0.95 0.95 1.9 2.9 0.51.5 2.5 0.5 0.16 0 to 0.1 0.8 1.1

No.7509-2/4 --20 --40 --60 --80 --100 --120 --140 --160 --180 --200 IC -- VCE IT04096 IT04098 IT04097 IT04099 IC -- VBE hFE -- IC 23 5 7--1.0 --10 23 5 7 --100 23 5 7 --1000 100 1000 --10 23 5 7--1.0 --10 23 5 7 --100 23 5 7 --1000 --100 --1000 VCE (sat) -- IC IB =0 --0.2mA --0.4mA --0.6mA --0.8mA --1.0mA --2.0mA IC / IB =20V CE = --2V Ta=75°C 25°C --25°C Ta=75°C --25°C --1.8mA --1.6mA --1.4mA --1.2mA 25°C Collector-to-Emitter V oltage, VCE -- V Collector Current, IC -- mA Base-to-Emitter V oltage, VBE -- V Collector Current, IC -- mA Collector Current, IC -- mA DC Current Gain, hFE Collector Current, IC -- mA Collector-to-Emitter Saturation V oltage, VCE (sat) -- mV --100 --200 --300 --400 V CE = --2V Ta=75 --25 Continued from preceding page. RatingsParameter Symbol Conditions min typ max Unit Collector-to-Base Breakdown Voltage V (BR)CBO IC =- -10µA, IE=0 - -30 V Collector-to-Emitter Breakdown Voltage V(BR)CEO IC =- -1mA, RBE =∞ - -30 V Emitter-to-Base Breakdown Voltage V (BR)EBO IE=- -10µA, IC =0 - -5 V Turn-ON Time t on See specified Test Circuit. 39 ns Storage Time t stg See specified Test Circuit. 200 ns Fall Time t f See specified Test Circuit. 48 ns Switching Time Test Circuit VR R B VCC = --12VVBE =5V ++50Ω INPUT OUTPUT R L 220µF 470 µF PW=20 µs IB1 D.C.≤1% IB2 IC =20IB1= --20IB2= --100mA

No.7509-3/4 100 150 200 250 300 350 4020 100 12060 80 140 160 IT04100 IT04101 VBE (sat) -- IC 23 5 7--1.0 --10 23 5 7 --100 23 5 7 --1000 --1000 23 5 7--1.0 --10 23 5 7 --100 23 5 7 --1000 100 1000 fT -- IC IC / IB =20 V CE = --10V Ta= --25°C 75°C 25°C IT04102 1.0 Cob -- VCB 23 5 7--0.1 --1.0 23 5 7 --10 23 5 7 --100 f=1MHz Output Capacitance, Cob -- pF Collector-to-Base V oltage, VCB -- V Collector Current, IC -- mA Collector Current, IC -- mA Gain-Bandwidth Product, fT -- MHz Base-to-Emitter Saturation V oltage, VBE (sat) -- mV PC -- Ta IT05521 Collector Dissipation, PC -- mW Ambient Temperature, Ta -- °C Mounted on a glass-epoxy board(20 53051.6mm) f=1MHz --0.1 0.1 Ron -- IB IT06066 1.0 100 32 57 32 57--1.0 --10 OUTIN 1kΩ 1kΩ IB Base Current, IB -- mA ON Resistance, Ron -- Ω

No.7509-4/4 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co. , Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 2003. Specifications and information herein are subject to change without notice. PS