305 MORSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 3

Technical content

The Specialist In Drum Handling Equipment 305 Series Can Tumblers Copyright 2023 - Morse Mfg. Co., Inc. Spec Sheet F305 (Updated 4 Jan, 2023) 1 service@morsedrum.com 103 Kuhn Rd. Syracuse, NY, 13208 USA morsedrum.com (315) 437-8475

  • Efficient “corner-over-corner” tumbling action
  • Use common 1 to 5 gallon pails for mixing Mix Inside Closed Shipping Cans Can Tumblers Rotate your cans or pails to thoroughly blend ingredients with an efficient “corner-over-corner” mixing action. Morse Can Tumblers are perfect to mix or blend small batches... or you can tumble parts with media to polish or deburr. Mixing in ordinary pails, instead of using special containers or insertion mixers, saves time and money! There is no costly transfer and no messy clean-up. It reduces the possibility of spills and the hazards of worker exposure to the product. The cans are held at an angle to the horizontal rotating shaft to provide a thorough “corner-over-corner” mixing action. Quickly secure a can in the holder with the adjustable bottom cross bar and screw-down top bar with locking handle. A 1/4 HP motor provides plenty of power for long service. It rotates the pail at a constant 23 RPM (19 RPM on 50Hz models) in one direction – the unit does not shake or oscillate cans. The heavy-duty steel frame stands steady while tumbling. Handles Can: 4.5” to 16.5” (11.4 to 42 cm) tall Up to 12.5” (31.75 cm) in diameter Rotation Speed: 23 RPM on 60Hz models

19 RPM on 50Hz models

Capacity: 100 Lb. (45 kg) per can Motor: AC Single or 3 phase, 60 or 50 Hz Explosion proof available Air powered models available Single phase, 115V models (models 1-305-1 and 2-305-1) are equipped with an adjustable timer. This allows the operator to select a running time up to 60 minutes with automatic shut-off. Other motor types do not include timer, cord or plug, and must be wired according to your local codes by a qualified electrician. Single Can Tumblers rotate one can “corner-over-corner” Double Can Tumblers rotate one or two cans at a time Model 1-305-1 shown Model 2-305-1 shown 33” 83.8 cm 28” 71.1 cm 50” 127 cm 28” 71.1 cm Install all Morse Can Tumblers and drum rotators in accordance with OSHA requirements for enclosure with interlock, etc. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) “Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place.” Power connections and motor controls must comply with applicable codes. Enclosures with Safety Interlock > > Watch Video < < Guard Enclosure shown installed with Double Can Tumbler (Can Tumbler sold separately).

  • Use separate can for each batch
  • No container to purge between batches > > Watch Video < < 12.6” 32 cm

morsedrum.com © 2023 - Morse Mfg. Co., Inc. Spec Sheet F305 2 The Specialist In Drum Handling Equipment 305 Series Can Tumblers Can Tumbler Model Numbers Model # Rotates Motor Volts AC Hz Phase Full Load Amp Draw 2-305-1 1 or 2 cans at 23 RPM 1/4 HP TEFC with 1 to 60 minute timer 115V 60 1 5.0 2-305-1-50 1 or 2 cans at 19 RPM 1/2 HP TEFC 110 / 220V 50 1 7.2 / 3.6 2-305-1-230 1 or 2 cans at 23 RPM 1/4 HP TEFC 208 / 230V 60 1 3.0 / 2.5 2-305-3 1 or 2 cans at 23 RPM 1/4 HP TEFC 208-230 / 460V 60 3 1.7 / 1.3 / .7 2-305-3-50 1 or 2 cans at 19 RPM 1/4 HP TENV 190 / 380V 50 3 1.2 / .6 2-305-575 1 or 2 cans at 23 RPM 1/2 HP TEFC 575V 60 3 .8 2-305-A 1 or 2 cans at 23 RPM 1/4 HP Air motor ** - - - - 2-305-E1 1 or 2 cans at 23 RPM 1/4 HP Explosion proof * 115 / 208-230V 60 1 5.0 / 2.6-2.5 2-305-E1-50 1 or 2 cans at 19 RPM 1/4 HP Explosion proof * 110 / 220V 50 1 5.2 / 2.6 2-305-E3 1 or 2 cans at 23 RPM 1/4 HP Explosion proof * 208-230 / 460V 60 3 1.4-1.3 / .7 2-305-E3-50 1 or 2 cans at 19 RPM 1/2 HP Explosion proof * 230 / 400V 50 3 1.7 / 1.0 2-305-E575 1 or 2 cans at 23 RPM 1/2 HP Explosion proof * 575V 60 3 .7 1-305-1 1 can at 23 RPM 1/4 HP TEFC with 1 to 60 minute timer 115V 60 1 5.0 1-305-1-50 1 can at 19 RPM 1/2 HP TEFC 110 / 220V 50 1 7.2 / 3.6 1-305-1-230 1 can at 23 RPM 1/4 HP TEFC 208 / 230V 60 1 3.0 / 2.5 1-305-3 1 can at 23 RPM 1/4 HP TEFC 208-230 / 460V 60 3 1.7 / 1.3 / .7 1-305-3-50 1 can at 19 RPM 1/4 HP TENV 190 / 380V 50 3 1.2 / .6 1-305-575 1 can at 23 RPM 1/2 HP TEFC 575V 60 3 .8 1-305-A 1 can at 23 RPM 1/4 HP Air motor ** - - - - 1-305-E1 1 can at 23 RPM 1/4 HP Explosion proof * 115 / 208-230V 60 1 5.0 / 2.6-2.5 1-305-E1-50 1 can at 19 RPM 1/4 HP Explosion proof * 110 / 220V 50 1 5.2 / 2.6 1-305-E3 1 can at 23 RPM 1/4 HP Explosion proof * 208-230 / 460V 60 3 1.4-1.3 / .7 1-305-E3-50 1 can at 19 RPM 1/2 HP Explosion proof * 230 / 400V 50 3 1.7 / 1.0 1-305-E575 1 can at 23 RPM 1/2 HP Explosion proof * 575V 60 3 .7 * Explosion proof motors are rated for class I group D and class II groups F and G. ** Air powered models require plant air at 40 psi and flowing at a rate of 22 scfm. Filter, Regulator, Lubricator and valve (Morse Kit # 90010-P) should be installed in the air line ahead of the motor.

morsedrum.com © 2023 - Morse Mfg. Co., Inc. Spec Sheet F305 3 The Specialist In Drum Handling Equipment 305 Series Can Tumblers Option XLC-1-305 Single Can Tumbler shown with option to mix a larger can installed. Option XLC-1-305 includes

  • 1 Extra-Large Can Holder
  • 2 Risers for Can Tumbler base Option XLC-2-305 Double Can Tumbler shown with option to mix two larger cans installed. Option XLC-2-305 includes
  • 2 Extra-Large Can Holders
  • 2 Risers for Can Tumbler base Options to Mix Larger Cans Accommodate a can:
  • Up to 16” (40.6 cm) diameter
  • 11” to 22” (28 to 55.9 cm) tall
  • Capacity: 100 Lb. (45.5 kg) per can These options include raised base and larger can holder(s). Options to Mix Larger Cans Options to Mix Larger Cans Option # Install on Description Maximum Can Diameter Can Heights Accommodated Maximum Can Weight XLC-1-305 1-305 Series Option for larger can on Single Can Tumbler 16” (40.64 cm) 11” to 22” (28 to 55.9 cm) 100 Lb. (45.4 kg) XLC-2-305 2-305 Series Option for larger cans on Double Can Tumbler 16” (40.64 cm) 11” to 22” (28 to 55.9 cm) 100 Lb. (45.4 kg) Larger Enclosure Kits for Tumbler with XLC Option Export Crate for Tumbler and XLC Option (NO Enclosure Kit) Export Crate for Tumbler, XLC Option and Enclosure Kit Enclsoure Kit # Fits Tumbler # with XLC Option Description Crate # Crate # GEK-XLC-1-305-1 1-305-1 Larger Enclosure for 1-305-1 with XLC Option 2837X-P 5980X-P GEK-XLC-1-305-3 1-305-3 Larger Enclosure for 1-305-3 with XLC Option GEK-XLC-1-305-A 1-305-A Larger Enclosure for 1-305-A with XLC Option GEK-XLC-1-305-E1 1-305-E1 Larger Enclosure for 1-305-E1 with XLC Option GEK-XLC-1-305-E3 1-305-E3 Larger Enclosure for 1-305-E3 with XLC Option GEK-XLC-2-305-1 2-305-1 Larger Enclosure for 2-305-1 with XLC Option GEK-XLC-2-305-3 2-305-3 Larger Enclosure for 2-305-3 with XLC Option GEK-XLC-2-305-A 2-305-A Larger Enclosure for 2-305-A with XLC Option GEK-XLC-2-305-E1 2-305-E1 Larger Enclosure for 2-305-E1 with XLC Option GEK-XLC-2-305-E3 2-305-E3 Larger Enclosure for 2-305-E3 with XLC Option IMPORTANT NOTE: Larger Can Holder Options REQUIRE larger enclosures than standard can tumblers, and larger crates when being exported. See chart below.