3018 AEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Tilt switches “make” when the electrode is tilted below horizontal and “break” when tilted above the horizontal. Total travel from “make” to “break” is the “Maximum included angle” shown below. The component to which the switch is attached must have a total tilt angle greater than the “Maximum included angle” for proper operation. Part No: 3018 - A1 Series Tilt Switch - Mercury American Electronic Components Inc., 1101 Lafayette Street, Elkhart, Indiana. USA Tel: +1-574-295-6330 Fax: +1-574-293-8013 Email: sales@aecsensors.com http://www.aecsensors.com © American Electronic Components Inc 2006 Specifications are subject to change without notice. E&OE. 3018 090606 Drawing dimensions in inches. Features: * Un-Insulated * Form: NO/NC/SPST/Mount dependent * Anti-Vibration Tilt Switch * Angles are application dependent * Single Electrode * Hermetically Sealed * Small Package Size * High Current Capability * Low Contact Resistance * Long Life Must Make / Break Angle * : Maximum included Angle: Application dependent * Make/break angles are electrode + (above) / - (below) 0° horizontal reference Switch Ratings: Max Switching Voltage 240V Max Switching Current 120VAC / 1A, 240VAC / 0.7A : 120VDC / 0.5A, 240VDC / 0.4A : Tungsten 240V / 100W Initial Contact Resistance (Max). 600 milli Ohms Stand Off Voltage (contact to contact) 1 kV AC Operating Temperature -38º to 220ºF / -38º to 105ºC Storage Temperature -40º to 356ºF / -40º to 180º C Typical number of operations at specified load 10,000,000 G-Force Activation G-Level/Range N/A Dimensions: Weight per 100pcs. Lbs / Kgs: 1.10 / 0.50 Body Length (less leads). Inches / Millimeters: 0.71 / 18.06 Maximum Diameter. Inches / Millimeters: 0.39 / 9.91 Materials: Lead Wire Type N/A Lead wire length/skive/termination N/A Finish: