RP15-A RECOM | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Features

  • 2:1 Wide Input Voltage Range
  • 1.6kVDC Isolation
  • UL Certified
  • Efficiency up to 89%
  • Six-Sided Continuous Shield
  • No Minimum Load Required PD-1REV.: 1/2016www.recom-power.com DC/DC Converter

3 YEAR

Description

The RP15-A series are ultraminiature power DC/DC converters in a case half the size of industry standard 15W converters. Despite their small size, the RP15-A converters are fully specified devices with output currents up to 4 Amps, no minimum load, 1600VDC isolation and low ripple/noise figures. The outputs are also fully protected against short circuits, overcurrent and overvoltage. The RP15-A series will find many uses in applications where board space and/or board height is at a premium. E196683 RP15-A Selection Guide Part Number Input Output Output Input(1) Efficiency (1) Max. Capacitive Voltage Range Voltage Current Current typ. Load(2) [VDC] [VDC] [mA] [mA] [%] [µF] RP15-123.3SA(3,4) 9-18 3.3 4000 1310 84 12000 RP15-1205SA(3,4) 9-18 5 3000 1420 88 6000 RP15-1212SA(3,4) 9-18 12 1300 1512 86 1000 RP15-1215SA(3,4) 9-18 15 1000 1420 88 660 RP15-243.3SA(3,4) 18-36 3.3 4000 640 86 12000 RP15-2405SA(3,4) 18-36 5 3000 710 88 6000 RP15-2412SA(3,4) 18-36 12 1300 747 87 1000 RP15-2415SA(3,4) 18-36 15 1000 710 88 660 RP15-483.3SA(3,4) 36-75 3.3 4000 320 86 12000 RP15-4805SA(3,4) 36-75 5 3000 355 88 6000 RP15-4812SA(3,4) 36-75 12 1300 369 88 1000 RP15-4815SA(3,4) 36-75 15 1000 355 88 660 RP15-1205DA(3,4) 9-18 ±5 ±1500 1471 85 ±3000 RP15-1212DA(3,4) 9-18 ±12 ±625 1437 87 ±520 RP15-1215DA(3,4) 9-18 ±15 ±500 1420 88 ±330 RP15-2405DA(3,4) 18-36 ±5 ±1500 735 85 ±3000 RP15-2412DA(3,4) 18-36 ±12 ±625 710 88 ±520 RP15-2415DA(3,4) 18-36 ±15 ±500 710 88 ±330 RP15-4805DA(3,4) 36-75 ±5 ±1500 368 85 ±3000 RP15-4812DA(3,4) 36-75 ±12 ±625 351 89 ±520 RP15-4815DA(3,4) 36-75 ±15 ±500 355 88 ±330 UL60950-1 Certified Ordering Examples RP15-2405SA/P = 24V Input, 5V Output, Positive Logic CTRL pin and Trim pin fitted RP15-4805DA-HC = 48V Input, ±5V Output, Heat-sink fitted. Model Numbering Input Voltage Output Voltage Single or Dual Notes: Note3: Standard part is without suffixes and Trim and CTRL pins are not fitted. add suffix “P” for CTRL function with positive logic (1=ON, 0=OFF) and trim pin for single output add suffix “N” for CTRL function with negative logic (0=ON, 1=OFF) and trim pin for single output Note4: add suffix -HC for premounted Heat-sink and clips Package(4) Control Logic(3) Notes: Note1: Values at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load.

PD-2 REV.: 1/2016 www.recom-power.com DC/DC Converter RP15-A Series BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Under Voltage Lockout (UVLO) Vin = 12V DC-DC ON DC-DC OFF 8VDC 9VDC Vin = 24V DC-DC ON DC-DC OFF 14.5VDC 18VDC Vin = 48V DC-DC ON DC-DC OFF 30.5VDC 36VDC Input Filter Pi-Type Input Reflected Ripple Current(5) nominal Vin and full load 30mAp-p Input Surge Voltage Vin = 12V, 100ms max. Vin = 24V, 100ms max. Vin = 48V, 100ms max. 36VDC 50VDC 100VDC Start-up time Power up Remote ON/OFF 30ms 30ms Operating Frequency Range 360kHz 400kHz 440kHz Minimum Load of full load 0% Optional Output Trim(6) ±10.0% Ripple and Noise measured by 20MHz bandwidth with a 1µF M/C X7R and 10µF T/C with a 1µF M/C X7R and 10µF T/C Single 3.3Vout, 5Vout 12Vout, 15Vout 75mVp-p 100mVp-p measured by 20MHz bandwidth with a 1µF M/C X7R and 10µF T/C Dual 100mVp-p Remote ON/OFF(6) Positive Logic DC-DC ON DC-DC OFF Open or 3.0 < Vr < 15VDC Short or 0 < Vr < 1.2VDC Negative Logic DC-DC ON DC-DC OFF Short or 0 < Vr < 1.2VDC Open or 3.0 < Vr < 15VDC Input current of Remote pin (CTRL) DC-DC OFF 2.5mA DC-DC ON -0.5 mA 1.0mA continued on next page Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted Notes: Note5: Simulated source impedance of 12µH. 12µH inductor in series with +Vin. Note6: The ON/OFF control function can be positive or negative logic. The pin voltage is referenced to -Vin pin. If no suffix is specified, the control pin will be omitted Efficiency vs. Output Current Efficiency vs. Input Voltage 9Vin 12Vin 18Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Total Input Voltage [%] 11 12 14 16 1810 13 15 17 RP15-1205SA

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series PD-3REV.: 1/2016www.recom-power.com Efficiency vs. Output Current Efficiency vs. Output Current Efficiency vs. Input Voltage Efficiency vs. Input Voltage 18Vin 24Vin 36Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 36Vin 48Vin 75Vin Efficiency [%] Output Current [%] 20 40 60 80 10030 50 70 90 Efficiency [%] Total Input Voltage [%] 22 24 28 32 3620 26 30 34 Efficiency [%] Total Input Voltage [%] 44 48 56 66 7540 52 60 72 RP15-2405SA RP15-4805SA REGULATIONS Parameter Condition Value Output Voltage Accuracy ±1% Line Voltage Regulation Single Dual ±0.2% ±0.5% Voltage adjustability Single ±10% Load Voltage Regulation 0% to 100% load Single Dual ±0.2% ±1.0% Cross Regulation asymmetrical 25%<>100% load ±5% Transient Response recovery time 25% load step change 250µs typ. continued on next page External Output Trimming Output Voltage Trimming Single output Powerline converters offer the feature of trimming the output voltage over a certain range around the nominal value by using external trim resistors. No general equation can be given for calculating the trim resistors, but the following trimtables give typical values for chosing these trimming resistors. If voltages between the given trim points are required, extrapolate between the two nearest given values to work out the resis tor required or use a variable resistor to set the output voltage. TRIM UP TRIM DOWN RU RD

PD-4 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP15-xx3.3A Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % Trim up 1 2 3 4 5 6 7 8 9 10 % Trim down 1 2 3 4 5 6 7 8 9 10 % RP15-xx05A RP15-xx12A RP15-xx15A

Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series PD-5REV.: 1/2016www.recom-power.com ENVIRONMENTAL Parameter Condition Value Operating Temperature Range without derating with derating -40°C to +68°C -40°C to +105°C Maximum Case Temperature +105°C Temperature Coefficient ±0.02%/°C max. Thermal Impedance Natural convection (20LFM) Natural convection (20LFM) with Heat sink 18.2°C/Watt 15.8°C/Watt Operating Humidity 5% - 95% RH Thermal Shock MIL-STD-810F Vibration MIL-STD-810F MTBF MIL-HDBK-217F Bellcore TR-NWT-000332(8) 1600 x 103 hours 1330 x 103 hours Derating Graph(9) Notes: Note8: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40°C. MIL-HDBK 217F Notice 2. Ta = 25°C, full load, (Ground, Benign, controlled environment). Note9: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part- number not shown here please contact our technical support service at techsupportAT@recom-power.com PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Voltage Protection (OVP) Zener Diode Clamp 3.3Vout 5Vout 12Vout 15Vout 3.7 - 5.4V 5.6 - 7.0V 13.5 - 19.6V 16.8 - 20.5V Over Load Protection (OLP) % of Iout rated 150% typ. Isolation Voltage I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.0kVDC/1 minute Isolation Resistance 500VDC 1GΩ min. Isolation Capacitance 1000pF max. -40 60 80 10010540200-20 100 Ambient Temperature [°C] Output Power [%] -40 60 80 100 105 40200-20 100 Ambient Temperature [°C] Output Power [%] RP15-1215SA RP15-1215SA with Heat-sink Notes: Note7: This power module is not internally fused. An input line fuse must always be used.

Certificate Type (Safety) Report / File Number Standard UL General Safety E196683 UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 EMC Compliance Condition Standard / Criterion EMI Standard(10) with external filter EN55022, Class A, Class B ESD Radiated Immunity Fast Transient(11) Surge(11) Conducted Immunity Air ±8kV and Contact ± 6kV

10 V/m

±2kV ±1kV 10 Vr.m.s EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A continued on next page PD-6 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series Input DC DC Fuse C1 C2 +VIN +VOUT -VOUT -VIN LOAD LOADLOAD Input DC DC Fuse C1 C2 +VIN +VOUT -VOUT -VIN Input DC DC Fuse C1 C2 +VIN +VOUT -VOUT -VIN LOAD LOADLOAD Input DC DC Fuse C1 C2 +VIN +VOUT -VOUT -VIN EMI Filtering Class A MODEL C1 C2 C3/C4 RP15-12xxS_DA 10µF/25V

1812 MLCC N/A 470pF/2kV

1808 MLCC

RP15-24xxS_DA 6.8µF/50V

1812 MLCC

6.8µF/50V RP15-48xxS_DA 2.2µF/100V 2.2µF/100V +VIN +VOUT -VOUT -VIN LOAD LOADLOAD DC DC Fuse C3C2C1 +VIN +VOUT -VOUT -VIN EMI Filtering Class B Notes: Note10: The standard modules meet EMI Class A or Class B with external components, see filter suggestions below. Note11: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The filter capacitor Recom suggests: Nippon chemi-con KY series, 220µF/100V.

DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper FR4 PCB Epoxy (UL94-V0) Package Dimensions (LxWxH) without Heat-sink with Heat-sink 25.4 x 25.4 x 9.9mm 31.4 x 25.4 x 16.5mm Package Weight without Heat-sink with Heat-sink 15g 21.44g continued on next page DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series PD-7REV.: 1/2016www.recom-power.com Dimension Drawing (mm) 4 6 1 2 Bottom View Standard 4 6 1 2 Bottom View CTRL Option 25.4 5.6 9.9 20.32 25.4 Ø 1.0 20.32 2.54 20.32 5.08 5.08 10.16 10.16 2.54 Top View Ø1.60 +0.15/-0 2.54 Pin Connections Pin # Single Single /P or /N Dual Dual /P or /N 1 +Vin +Vin +Vin +Vin 2 -Vin -Vin -Vin -Vin 3 no Pin CTRL no Pin CTRL 4 +Vout +Vout +Vout +Vout 5 no Pin Trim Com Com 6 -Vout -Vout -Vout -Vout Pin Pitch Tolerance ±0.25mm Pin Dimension Tolerance ±0.1mm XX.X ± 0.5 mm XX.XX ± 0.25 mm Input Input DC DC Fuse C3C2C1 +VIN +VOUT -VOUT -VIN LOAD LOADLOAD DC DC Fuse C3C2C1 +VIN +VOUT -VOUT -VIN MODEL C1 C2 C3 C4/C5 L1 RP15-12xxS_DA 10µF/25V

1812 MLCC N/A 10µF/25V

CMC: 145µH ref: WE 482210002 ref: CMC-07 RP15-24xxS_DA 6.8µF/50V 1812 MLCC N/A 6.8µF/50V CMC: 325µH ref: WE 744290321 ref: CMC-06 RP15-48xxS_DA 2.2µF/100V 2.2µF/100V 2.2µF/100V CMC: 325µH ref: WE 744290321 ref: CMC-06

PD-8 REV.: 1/2016 www.recom-power.com DC/DC Converter Specifications measured at Ta = 25°C, nominal input voltage, full load otherwise noted RP15-A Series PACKAGING INFORMATION Parameter Type Value Packaging Quantity without Heat-sink with Heat-sink Tube Tray 8pcs. 20pcs. Storage Temperature Range -55°C to +125°C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM’s explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. Dimension Drawing (mm) with Heat-sink 25.4 31.4 5.6 16.5 9.9 20.32 25.4 Ø 1.0 2.54 24.20 24.20 Top View Heat-sink 5.85