3000 SCS | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 1
Technical content
This foil moisture barrier bag provides protection for ESD sensitive and moisture sensitive electronics, typically SMT (Surface Mount Technology) items. Best practice is to use with Desiccant and a Humidity Indicator Card. A nylon layer helps to strengthen the bag. The bags are heat sealable and suitable for vacuum packaging. Bags are printed with ESD protective and moisture sensitive warning symbols, and a lot code for traceability. SCS Moisture Barrier Bags Dri-Shield® 3000 are manufactured from a laminate of nylon, foil, and polyethylene. The metal layer provides discharge shielding and minimizes the penetration of electric fields and electrostatic discharges. DRAWING NUMBER Dri-Shield® 3000 DATE September 2019 © 2019 DESCO INDUSTRIES INC Employee Owned DRI-SHIELD ® 3000 MOISTURE BARRIER BAG
926 JR Industrial Drive, Sanford, NC 27332
WEB SITE: StaticControl.com PHONE (919) 718-0000 Moisture Barrier Bag Dri-Shield® 3000 Specifications and procedures subject to change without notice. Made in the United States of America with Globally Sourced Materials. Bag is free of amines, silicones and heavy metals. This product is intended for commercial use only. This product is not on the Qualified Product Listing under the Defense Standardization Program. Open Top Bag ZipTop Bag Tolerance (inches): Width -0, +0.250 Length +/- 0.125 Offset O to 0.250 Seal width +/- 0.125 Meets ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, Static Control Bag ANSI/ESD S11.4 Level 1, and IPC/JEDEC J-STD-033. Physical Typical Value Testing Method Moisture Vapor Transmission Rate (MVTR) < 0.0003 grams/100 sq. in./24 hrs < 0.002 grams/100 sq. in./24hrs ASTM F1249 ASTM F392 condition E and ASTM F2149 Tensile Strength 3800 PSI, 26 MPa ASTM D882 Puncture Resistance 16 lbs, 71 N MIL-STD-3010C Method 2065 Seal Strength 15 lbs, 66 N ASTM D882 Thickness 6 mils, 0.006" +/-10% MIL-STD-3010C Method 1003 Marking Adhesion Pass IPC-TM-650 2.4.1 Electrical Typical Value Testing Method ESD Shielding <10 nJ ANSI/ESD STM11.31 Surface Resistance - Interior 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 Surface Resistance - Exterior 1 x 104 to < 1 x 1011 ohms ANSI/ESD STM11.11 EMI Attenuation 45 dB 1 to 10 GHz Cleanliness Typical Value Testing Method Silicone Not Detected FTIR Heat Sealing Conditions Typical Value Temperature 400°F, 204°C Time 0.6 – 4.5 seconds Pressure 30 – 70 PSI, 206 – 482 KPa Tolerance: Width -0, +1/4" Length +/- 1/8" Offset 0 to 1/4" Seal width 3/8" with a tolerance of +/- 1/8" Note: Standard bag markings shown above are not to scale. NOTE: The complete dry package concept of packaging for electronics requires three elements: Moisture Barrier Bags - To Protect Desiccants - To Absorb Moisture Humidity Indicator Cards - To Monitor Performance SCS Moisture Barrier Bags are packaged in a polyethylene bag. RoHS, REACH, and Conflict Minerals Statement See the Desco Industries RoHS, REACH, and Conflict Minerals Statement: DescoIndustries.com/ROHS3.aspx See the SCS Limited Warranty: StaticControl.DescoIndustries.com/Limited-Warranty.aspx