2W06G

2W005G GE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER Reverse Voltage -50 to 1000 VoltsForward Current -2.0 Amperes

FEATURES

♦ Plastic package has Underwriters Laboratory Flammability Recognition 94V-0 ♦ This series is UL listed under the Recognized Component Index, file number E54214 ♦ Glass passivated chip junctions ♦ High case dielectric strength ♦ Typical IR less than 0.5µA ♦ High surge current capability ♦ Ideal for printed circuit boards ♦ High temperature soldering guaranteed: 260°C for 10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3kg) tension MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals:Plated leads, solderable per MIL-STD-750, Method 2026 Mounting Position:Any Weight:0.04 ounce, 1.1 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. 2W 2W 2W 2W 2W 2W 2W SYMBOLS 005G 01G 02G 04G 06G 08G 10G UNITS Maximum repetitive peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length (SEE FIG. 1) I(AV) 2.0 Amps Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 60.0 Amps Rating for fusing (t<8.3ms) I 2t 15.0 A 2sec Maximum instantaneous forward voltage drop per leg at 2.0 Amperes VF 1.1 Volts Maximum DC reverse current at rated T A=25°C 5.0 DC blocking voltage per leg T A=125°C IR 500.0 µA Typical junction capacitance per leg(NOTE 1) C J 40.0 20.0 pF Typical thermal resistance per leg(NOTE 2) R Θ JA 40.0 °C/WR Θ JL 15.0 Operating junction temperature range T J -55 to + 150 °C Storage temperature range T STG -55 to +150 °C NOTES: (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts Case Style W OG Dimensions in inches and (millimeters) 0.220 (5.6) 0.160 (4.1) 0.388 (9.86) 0.348 (8.84) 0.032 (0.81) 0.028 (0.71) 1.0 (25.4) MIN. 0.060 (1.52) 0.020 (0.51) 0.348 (8.84) 0.308 (7.82) 0.220 (5.6) 0.180 (4.6) 0.220 (5.6) 0.180 (4.6)

0.4 0.8 1.2 1.6 2.0 2.4 100 0.01 0.1 1 10 100 0.1 0.01 0.1 1000.1 1 10 100 100101 0 2 0 4 06 08 0 1 0 0 0.01 0.1 100 FIG. 1 - DERATING CURVE OUTPUT RECTIFIED CURRENT AMBIENT TEMPERATURE, °C 60 HZ RESISTIVE OR INDUCTIVE LOAD PERCENT OF RATED PEAK REVERSE VOLTAGE, %INSTANTANEOUS FORWARD VOLTAGE, VOLTS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TRANSIENT THERMAL IMPEDANCE, °C/W TJ=25°C PULSE WIDTH=300 µs 1% DUTY CYCLE FIG. 3 - TYPICAL FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT, AMPERES FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER LEG FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE REVERSE VOLTAGE, VOLTS t, HEATING TIME, sec. TJ=25°C f=1.0 MHz Vsig=50mVp-p TA = 25°C CAPACITIVE LOADS 5.0 Ipk/I (AV) 10 (PER LEG) 20 COPPER PADS 0.22 x 0.22” (5.5 x 5.5mm) AVERAGE FORWARD OUTPUT CURRENT, AMPERES TJ = 125°C FIG. 4 - TYPICAL REVERSE CHARACTERISTICS PER LEG TA=25°C SINGLE SINE-WAVE (JEDEC Method) NUMBER OF CYCLES AT 60 Hz PEAK FORWARD SURGE CURRENT, AMPERES FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PER LEG TJ = 100°C P.C.B. 0.375” (9.5mm) RATINGS AND CHARACTERISTICS CURVES 2W005G THRU 2W10G

1.0 CYCLE

JUNCTION CAPACITANCE, pF