2908264

2908264 PHOENIX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 10

Technical content

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 1 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pluggable lightning current arrester for higher nominal voltages, in accordance with Type 1/Class I, for 3- phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). Your advantages Spark gap has no line follow current Free of leakage current High continuous voltage of 440 V AC for 400/690 V AC networks with high voltage fluctuations Pluggable Low voltage protection level of 2.5 kV Optical, mechanical status indicator With floating remote indication contact Plugs can be checked with CHECKMASTER 2 Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626289090 Technical data Dimensions Height 95.2 mm Width 142.4 mm Depth 74.5 mm (incl. DIN rail 7.5 mm) Horizontal pitch 8 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 80 °C

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 2 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Technical data Ambient conditions Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (5 - 500 Hz/2.5 h/X, Y, Z) General IEC test classification I / II T1 / T2 EN type T1 / T2 IEC power supply system TN-S TT Mode of protection L-N L-PE N-PE Mounting type DIN rail: 35 mm Color light grey RAL 7035 traffic grey A RAL 7042 Housing material PA 6.6-FR 20 % GF PBT-FR Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 4 Surge protection fault message Optical, remote indicator contact Protective circuit Nominal voltage UN 400/690 V AC (TN-S) 400/690 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 440 V AC Rated load current IL 125 A (< 55 °C) Residual current IPE ≤ 0.01 mA Nominal discharge current In (8/20) µs (L-N) 35 kA Nominal discharge current In (8/20) µs (L-PE) 35 kA Nominal discharge current In (8/20) µs (N-PE) 100 kA Maximum discharge current Imax (8/20) µs (L-N) 50 kA Maximum discharge current Imax (8/20) µs (L-PE) 50 kA Impulse discharge current (10/350) µs (L-N), charge 17.5 As Impulse discharge current (10/350) µs (L-N), specific energy 310 kJ/Ω

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 3 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Technical data Protective circuit Impulse discharge current (10/350) µs (L-N), peak current value Iimp 35 kA Impulse discharge current (10/350) µs (L-PE), charge 17.5 As Impulse discharge current (10/350) µs (L-PE), specific energy 310 kJ/Ω Impulse discharge current (10/350) µs (L-PE), peak current value Iimp 35 kA Impulse discharge current (10/350) µs (N-PE), charge 50 As Impulse discharge current (10/350) µs (N-PE), specific energy 2500 kJ/Ω Impulse discharge current (10/350) µs (N-PE), peak current value Iimp 100 kA Total discharge current Itotal (10/350) µs 100 kA Follow current interrupt rating Ifi (L-N) 50 kA Follow current interrupt rating Ifi (L-PE) 50 kA Follow current interrupt rating Ifi (N-PE) 100 A Short-circuit current rating ISCCR 50 kA Voltage protection level Up (L-N) ≤ 2.5 kV Voltage protection level Up (L-PE) ≤ 4.5 kV Voltage protection level Up (N-PE) ≤ 2.5 kV Residual voltage Ures (L-N) ≤ 2.5 kV (at In) Residual voltage Ures (L-PE) ≤ 4.5 kV (at In) Residual voltage Ures (N-PE) ≤ 2.5 kV (at In) TOV behavior at UT (L-N) 580 V AC (5 s / withstand mode)

800 V AC (120 min / withstand mode)

TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode) Response time tA ≤ 100 ns Max. backup fuse with V-type through wiring 125 A (gG) Max. backup fuse with branch wiring 400 A (gG) Indicator/remote signaling Switching function PDT contact Operating voltage 12 V AC ... 250 V AC

125 V DC (200 mA DC)

Operating current 10 mA AC ... 1 A AC

1 A DC (30 V DC)

Connection method Plug-in/screw connection via COMBICON Screw thread M2 Tightening torque 0.25 Nm Stripping length 7 mm Conductor cross section AWG 28 ... 16 Connection data

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 4 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Technical data Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 18 mm Conductor cross section flexible 2.5 mm² ... 35 mm² Conductor cross section solid 2.5 mm² ... 35 mm² Conductor cross section AWG 13 ... 2 Connection method Fork-type cable lug Conductor cross section flexible 1.5 mm² ... 16 mm² UL specifications SPD Type 2CA Maximum continuous operating voltage MCOV (L-L) 880 V AC Maximum continuous operating voltage MCOV (L-N) 440 V AC Maximum continuous operating voltage MCOV (L-G) 440 V AC Maximum continuous operating voltage MCOV (N-G) 440 V AC Nom. voltage 400/690 V AC Rated load current IL 50 A Mode of protection L-L L-N L-G N-G Power distribution system Wye Nominal frequency 50/60 Hz Voltage protection rating VPR (L-L) 3000 V Voltage protection rating VPR (L-N) 1800 V Voltage protection rating VPR (L-G) 1800 V Voltage protection rating VPR (N-G) 1500 V Nominal discharge current In 20 kA Short-circuit current rating (SCCR) 25 kA UL indicator/remote signaling Operating voltage 125 V AC Operating current 1 A AC Tightening torque 4 lbf-in. Conductor cross section AWG 30 ... 14 UL connection data Conductor cross section AWG 3 ... 2 Tightening torque 40 lbf-in.

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 5 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Technical data Standards and Regulations Standards/regulations IEC 61643-11 2011 EN 61643-11 2012 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 6 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27130802 eCl@ss 4.0 27130800 eCl@ss 4.1 27130800 eCl@ss 5.0 27130800 eCl@ss 5.1 27130800 eCl@ss 6.0 27130800 eCl@ss 7.0 27130802 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 ETIM ETIM 4.0 EC000381 ETIM 5.0 EC000381 ETIM 6.0 EC000381 ETIM 7.0 EC000381 UNSPSC UNSPSC 13.2 39121620 UNSPSC 18.0 39121620 UNSPSC 19.0 39121620 UNSPSC 20.0 39121620 UNSPSC 21.0 39121620

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 7 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Approvals Approvals Approvals EAC / UL Recognized / cUL Recognized / cULus Recognized Ex Approvals Approval details EAC RU C- DE.*09.B.00169 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 330181 cULus Recognized Accessories Accessories Device marking Label - EML (20XE)R - 0803452 Label, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20˽mm

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 8 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Accessories Label - EML (20XE)R YE - 0803453 Label, Roll, yellow, unlabeled, can be labeled with: THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK ROLL X1, THERMOMARK ROLL 2.0, THERMOMARK ROLL, mounting type: adhesive, lettering field size: continuous x 20˽mm Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray Labeled device marker Marker for terminal blocks - ZBN 18,LGS:L1-N,ERDE - 2749576 Marker for terminal blocks, Strip, white, labeled, horizontal: L1, L2, L3, N, GND, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 9 / 10 Combination type 1/2 protective device - FLT-SEC-P-T1-3S-440/35- FM - 2908264 Accessories Marker for terminal blocks - ZBN 18,LGS:ERDE - 2749589 Marker for terminal blocks, Strip, white, labeled, horizontal: Grounding symbol, mounting type: snap into tall marker groove, for terminal block width: 18 mm, lettering field size: 18 x 5 mm, Number of individual labels: 5 Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm Terminal marking Flat zack marker sheet - ZBFM 5/WH:UNBEDRUCKT - 0803595 Flat zack marker sheet, Sheet, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, mounting type: snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 5 x 4.5 mm, Number of individual labels: 120 Spare parts Type 1 surge protection plug - FLT-SEC-P-T1-440/35-P - 2905989 Replacement plug for lightning current arresters from the FLASHTRAB SEC PLUS 440 product range, for L-N and L- PE paths. Type 1 surge protection plug - FLT-SEC-P-T1-N/PE-440/100-P - 2907263 Replacement plug for lightning current arresters from the FLASHTRAB SEC product range, for the N-PE path.

https://www.phoenixcontact.com/pi/products/2908264 09/12/2020 Page 10 / 10 Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com