2900342 PHOENIX | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 17
Technical content
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 1 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of PLC-BPT.../21-21 basic terminal block with Push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/DC Your advantages Slim design Efficient connection to system cabling using V8 adapter Safe isolation according to DIN EN 50178 between coil and contact RT III sealed relay Functional plug-in bridges Integrated input circuit and interference suppression circuit Key Commercial Data Packing unit 10 pc GTIN GTIN 4046356509985 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 14 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Degree of protection RT III (Relay)
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 2 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Technical data Ambient conditions IP20 (Relay base) Coil side Nominal input voltage UN 120 V AC
110 V DC
Typical input current at UN 4.2 mA (at 110 V DC) 4.5 mA (at 120 V AC) Typical response time 7 ms Typical release time 10 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 0.54 W Contact side Contact type 2 changeover contacts Type of switch contact Single contact Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC
36 V DC
Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Contact side (with destroyed gold layer) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V AC/DC Limiting continuous current 6 A Maximum inrush current 15 A (300 ms) Min. switching current 10 mA Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
85 W (at 48 V DC)
60 W (at 60 V DC)
44 W (at 110 V DC)
60 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity 2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
2 A (at 24 V, AC15)
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 3 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Technical data Contact side (with destroyed gold layer)
2 A (at 120 V, AC15)
2 A (at 250 V, AC15)
Operating mode 100% operating factor Flammability rating according to UL 94 V0 (Housing) Mechanical service life 3x 10 cycles Mounting position any Assembly instructions in rows with zero spacing Connection data Connection name Coil side Connection method Push-in connection Stripping length 8 mm 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG 26 ... 14 Connection data 2 Connection name Contact side Connection method Push-in connection Stripping length 8 mm 2x 0.5 mm² ... 1 mm² (TWIN ferrule) Conductor cross section AWG 26 ... 14 Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 EN 50178 Rated surge voltage 6 kV Insulation Basic insulation Pollution degree 3 Overvoltage category III Conformance/approvals Designation Corrosive gas test Identification ISA-S71.04. G3 Harsh Group
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 4 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Technical data Conformance/approvals EN 60068-2-60 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Diagram 0,7 25 30 35 40 45 50 55 60 6520 1,3 0,8 0,9 1,1 1,2 1,4UN U T [°C]U A B U = 110 V DCN U = 120 V ACN U = 110 V DCNU = 120 V ACN Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 5 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Articles in set Relay base - PLC-BPT-120UC/21-21 - 2900287 14 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/DC Single relay - REL-MR-110DC/21-21AU - 2961228 Plug-in miniature power relay, with multi-layer gold contact, 2 changeover contacts, input voltage 110 V DC Classifications eCl@ss eCl@ss 10.0.1 27371601 eCl@ss 11.0 27371601 eCl@ss 4.0 27371000 eCl@ss 4.1 27371000 eCl@ss 5.0 27371600 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 6.0 EC001437 ETIM 7.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 UNSPSC 18.0 39122334
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 6 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Classifications UNSPSC UNSPSC 19.0 39122334 UNSPSC 20.0 39122334 UNSPSC 21.0 39122334 Approvals Approvals Approvals UL Listed / UL Recognized / cUL Recognized / cUL Listed / RC FRT / EAC / EAC / DNV GL / cULus Recognized / cULus Listed Ex Approvals Approval details UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 RC FRT B.00094 EAC TR_TS_D_00573_c
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 7 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Approvals EAC RU*C- DE.*08.B.00010 DNV GL https://approvalfinder.dnvgl.com/ TAE0000196 cULus Recognized cULus Listed Accessories Accessories Bridge Continuous plug-in bridge - FBST 500-PLC RD - 2966786 Continuous plug-in bridge, color: red Continuous plug-in bridge - FBST 500-PLC BU - 2966692 Continuous plug-in bridge, color: blue Continuous plug-in bridge - FBST 500-PLC GY - 2966838 Continuous plug-in bridge, color: gray
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 8 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Single plug-in bridge - FBST 6-PLC RD - 2966236 Single plug-in bridge, color: red Single plug-in bridge - FBST 6-PLC BU - 2966812 Single plug-in bridge, color: blue Single plug-in bridge - FBST 6-PLC GY - 2966825 Single plug-in bridge, color: gray Single plug-in bridge - FBST 8-PLC GY - 2967688 Single plug-in bridge, color: gray Single plug-in bridge - FBST 14-PLC BK - 2967691 Single plug-in bridge, color: black DIN rail
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 9 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, acc. to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, acc. to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 10 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, Standard profile, color: silver DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, acc. to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5 DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 11 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile, color: silver DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, similar to EN 60715, material: Steel, Galvanized, white passivated, Standard profile, color: silver DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated, Standard profile, color: silver DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 12 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, similar to EN 60715, material: Steel, galvanized, Standard profile, color: silver DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, similar to EN 60715, material: Copper, uncoated, Standard profile, color: copper-colored End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15 DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 13 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 14 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip - ZB 12 CUS - 0824942 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Zack marker strip - ZB 12,LGS:L1-N,PE - 0812146 Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5 Marker for terminal blocks - UC-TM 12 CUS - 0824613 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks - UCT-TM 12 CUS - 0829630 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Partition plate
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 15 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Separating plate - PLC-ATP BK - 2966841 Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation Power module Power terminal block - PLC-ESK GY - 2966508 Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2- component grip, with non-slip grip Terminal marking Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10 Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 16 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36 Zack marker strip - ZB 12:UNPRINTED - 0812120 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of individual labels: 5 Marker for terminal blocks - UC-TM 12 - 0819194 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40 Marker for terminal blocks - UCT-TM 12 - 0829144 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30 Spare parts Relay base - PLC-BPT-120UC/21-21 - 2900287 14 mm PLC basic terminal block with Push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 2 changeover contacts, input voltage 120 V AC/DC
https://www.phoenixcontact.com/pi/products/2900342 10/27/2021 Page 17 / 17 Relay Module - PLC-RPT-120UC/21-21AU - 2900342 Accessories Single relay - REL-MR-110DC/21-21AU - 2961228 Plug-in miniature power relay, with multi-layer gold contact, 2 changeover contacts, input voltage 110 V DC Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8
32825 Blomberg
Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com