2900310 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 1 / 6 Relay Module - PLC-RPT-120UC/21AU - 2900310 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in connection and plug-in miniature relay with multi-layer gold contact, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 120 V AC/110 V DC Your advantages Slim design Efficient connection to system cabling using V8 adapter RT III sealed relay Safe isolation according to DIN EN 50178 between coil and contact Integrated input circuit and interference suppression circuit Functional plug-in bridges Key Commercial Data Packing unit 10 pc GTIN GTIN 4046356509596 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 2 / 6 Relay Module - PLC-RPT-120UC/21AU - 2900310 Technical data Coil side Nominal input voltage UN 120 V AC

110 V DC

Typical input current at UN 3.5 mA (at UN = 120 V AC) 3 mA (at UN = 120 V AC) Typical response time 6 ms Typical release time 15 ms Protective circuit Bridge rectifier Bridge rectifier Operating voltage display Yellow LED Power dissipation for nominal condition 0.42 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgSnO, hard gold-plated Maximum switching voltage 30 V AC

36 V DC

Minimum switching voltage 100 mV (at 10 mA) Min. switching current 1 mA (at 24 V) Maximum inrush current 50 mA Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Contact side (with destroyed gold layer) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V (at 100 mA) Limiting continuous current 6 A Min. switching current 10 mA (at 12 V) Interrupting rating (ohmic load) max. 140 W (at 24 V DC)

20 W (at 48 V DC)

18 W (at 60 V DC)

23 W (at 110 V DC)

40 W (at 220 V DC)

1500 VA (for 250 V AC)

Switching capacity 2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.1 A (at 220 V, DC13)

3 A (at 24 V, AC15)

3 A (at 120 V, AC15)

3 A (at 230 V, AC15)

Connection data input side

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 3 / 6 Relay Module - PLC-RPT-120UC/21AU - 2900310 Technical data Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section AWG 26 ... 14 Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section AWG 26 ... 14 General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT III (Relay) IP20 (Relay base) Mechanical service life 2x 10 cycles Mounting position any Assembly instructions In rows with zero spacing Net weight (SAP) 36.06 g Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 IEC 60664A DIN VDE 0110 DIN EN 50178/DIN VDE 0160 (in relevant parts) DIN EN 50178/VDE 0160 IEC 60255/DIN VDE 0435 (in relevant parts) Degree of pollution 3 Overvoltage category III Flammability rating according to UL 94 V0 Environmental Product Compliance

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 4 / 6 Relay Module - PLC-RPT-120UC/21AU - 2900310 Technical data Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram A2 11 Articles in set Relay base - PLC-BPT-120UC/21 - 2900280 6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 120 V AC/DC Single relay - REL-MR- 60DC/21AU - 2961134 Plug-in miniature power relay, with multi-layer gold contact, 1 PDT, input voltage 60 V DC Approvals Approvals Approvals DNV GL / UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / RC FRT / cULus Recognized / cULus Listed Ex Approvals

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 5 / 6 Relay Module - PLC-RPT-120UC/21AU - 2900310 Approvals Approval details DNV GL http://exchange.dnv.com/tari/ TAE0000196-01 UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 EAC RU C- DE.A*30.B.01082 RC FRT B.00094 cULus Recognized cULus Listed

https://www.phoenixcontact.com/pi/products/2900310 03/19/2019 Page 6 / 6 Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com