2900299 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 1 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with push-in technology and plug-in miniature relay with power contact, for mounting on NS 35/7,5 DIN rails, 1 PDT, input voltage: 24 V DC Your advantages Slim design Efficient connection to system cabling using V8 adapter RT III sealed relay Safe isolation according to DIN EN 50178 between coil and contact Functional plug-in bridges Integrated input circuit and interference suppression circuit Key Commercial Data Packing unit 10 pc GTIN GTIN 4046356506991 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 2 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Technical data Coil side Nominal input voltage UN 24 V DC Typical input current at UN 9 mA Typical response time 5 ms Typical release time 8 ms Protective circuit Reverse polarity protection Polarity protection diode Free-wheeling diode Damping diode Operating voltage display Yellow LED Power dissipation for nominal condition 0.22 W Contact side Contact type 1 PDT Type of switch contact Single contact Contact material AgSnO Maximum switching voltage

250 V AC/DC (The separating plate PLC-ATP should be installed for

voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8- Minimum switching voltage 5 V (at 100 mA) Min. switching current 10 mA (at 12 V) Maximum inrush current 10 A (4 s) Limiting continuous current 6 A Interrupting rating (ohmic load) max. 140 W (at 24 V DC)

20 W (at 48 V DC)

18 W (at 60 V DC)

23 W (at 110 V DC)

40 W (at 220 V DC)

1500 VA (for 250 V AC)

Switching capacity 2 A (at 24 V, DC13)

0.2 A (at 110 V, DC13)

0.1 A (at 220 V, DC13)

3 A (at 24 V, AC15)

3 A (at 120 V, AC15)

3 A (at 230 V, AC15)

Connection data input side Connection name Coil side Connection method Push-in connection Stripping length 8 mm Conductor cross section AWG 26 ... 14

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 3 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Technical data Connection data output side Connection name Contact side Connection method Push-in connection Stripping length 8 mm Conductor cross section AWG 26 ... 14 General Note Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT III (Relay) IP20 (Relay base) Mechanical service life 2x 10 cycles Mounting position any Assembly instructions In rows with zero spacing Net weight (SAP) 32.466 g Standards and Regulations Connection in acc. with standard CUL Designation Standards/regulations Standards/regulations IEC 60664 IEC 60664A DIN VDE 0110 DIN EN 50178/DIN VDE 0160 (in relevant parts) DIN EN 50178/VDE 0160 IEC 60255/DIN VDE 0435 (in relevant parts) Degree of pollution 3 Overvoltage category III Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 4 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Diagram Interrupting rating Diagram 0,7 25 30 35 40 45 50 55 60 6520 1,3 0,8 0,9 1,1 1,2 1,4 U U N T□□□[ °C]U A B U =□24□V□DCN Curve A Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data) Curve B Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data) Circuit diagram A2 11 Articles in set Relay base - PLC-BPT- 24DC/21 - 2900445 6.2 mm PLC basic terminal block with push-in connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 PDT, input voltage 24 V DC Single relay - REL-MR- 24DC/21 - 2961105 Plug-in miniature power relay, with power contact, 1 PDT, input voltage 24 V DC

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 5 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Approvals Approvals Approvals DNV GL / UL Listed / UL Recognized / cUL Recognized / cUL Listed / EAC / RC FRT / cULus Recognized / cULus Listed Ex Approvals Approval details DNV GL http://exchange.dnv.com/tari/ TAE0000196-01 UL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Listed http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 172140 EAC RU C- DE.A*30.B.01082 RC FRT B.00094 cULus Recognized

https://www.phoenixcontact.com/pi/products/2900299 03/19/2019 Page 6 / 6 Relay Module - PLC-RPT- 24DC/21 - 2900299 Approvals cULus Listed Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8

32825 Blomberg

Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com