2800106 PHOENIX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 8

Technical content

Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Type 1 / Class I / B arrester (lightning current arrester) with arc chopping spark gap, 1-channel. Housing width: 17.5 mm (1 Div.) Your advantages High discharge capacity• Commercial data Item number 2800106 Packing unit 1 pc Minimum order quantity 1 pc Sales key CL01 Product key CL1131 Catalog page Page 22 (TT-2011) GTIN 4046356479929 Weight per piece (including packing) 179 g Weight per piece (excluding packing) 177 g Customs tariff number 85363010 Country of origin IN FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 1 (8)

Product type Combination type IIEC test classification EN type T1 TN-S TN-C IEC power supply system TT Type DIN rail module, one-piece Number of positions 1 Surge protection fault message none Insulation characteristics Overvoltage category III Pollution degree 2 Electrical properties Nominal frequency fN 50 Hz (60 Hz) Connection data Connection method Screw connection Screw thread M5 Tightening torque 4.5 Nm Stripping length 14.5 mm Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 25 mm² Conductor cross section, rigid min. 2.5 mm² Conductor cross section, rigid max. 35 mm² Conductor cross section AWG 6 ... 2 Dimensions Dimensional drawing Width 17.7 mm Height 90 mm Depth 65.5 mm Horizontal pitch 1 Div. FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 2 (8)

Color black (RAL 9005) Flammability rating according to UL 94 V-0 CTI value of material 600 Insulating material PA 6.6 Material group I Housing material PA 6.6 Mechanical properties Mechanical data Open side panel No Protective circuit Mode of protection L-PEN Direction of action 1L-N/PE 230/400 V AC (TN)Nominal voltage UN 230/400 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-PEN) 440 V AC Rated load current IL 80 A Residual current IPE ≤ 0.1 mA Standby power consumption PC ≤ 44 mVA Nominal discharge current In (8/20) µs (L-PEN) 25 kA Impulse discharge current (10/350) µs (L-PEN), charge 12.5 As Impulse discharge current (10/350) µs (L-PEN), specific energy 156 kJ/Ω Impulse discharge current (10/350) µs (L-PEN), peak current value Iimp 25 kA Follow current quenching capacity Ifi (L-PEN) 2.5 kA Short-circuit current rating ISCCR 2.5 kA Voltage protection level Up (L-PEN) ≤ 5 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 5 kV

440 V AC (5 s / withstand mode)TOV behavior at UT (L-PEN)

440 V AC (120 min / withstand mode)

Response time tA (L-PEN) ≤ 100 ns Max. backup fuse with V-type through wiring 80 A AC (gG) Max. backup fuse with branch wiring 250 A AC (gG) Environmental and real-life conditions Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 85 °C FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 3 (8)

Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m (amsl) Permissible humidity (operation) 5 % ... 95 % Standards and regulations Air clearances and creepage distances Standards/regulations EN 60664-1 / EN 61643-11 Standards/specifications IEC 61643-11 Note 2011 Standards/specifications EN 61643-11 Note 2012 Mounting Mounting type DIN rail: 35 mm FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 4 (8)

17,790 65,5 Circuit diagram L/N () L/N () FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 5 (8)

To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/2800106  EAC Approval ID: EAC-Zulassung  EAC Approval ID: RU C-DE.*09.B.00169 FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 6 (8)

ECLASS-13.0 27171201 ETIM ETIM 9.0 EC000381 UNSPSC UNSPSC 21.0 39121600 FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 7 (8)

Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes, No exemptions China RoHS EFUP-EEnvironment friendly use period (EFUP) No hazardous substances above the limits EU REACH SVHC REACH candidate substance (CAS No.) No substance above 0.1 wt% Phoenix Contact 2025 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA

586 Fulling Mill Road

Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com FLT 25-400 - Type 1+2 combined lightning current and surge arrester 2800106 https://www.phoenixcontact.com/us/products/2800106 Mar 27, 2025, 12:18 AM Page 8 (8)